Abstract:In this work, an innovative in situ etching treatment method to reduce surface defects of CsPbI2.85Br0.15 perovskite films by using methanol without additional passivator is proposed. A slight excess of PbI2 is generated on perovskite surface, which is beneficial to form gradient energy level alignment. Eventually, a champion CsPbI2.85Br0.15 inorganic perovskite solar cell with efficiency of 19.34% is achieved. Inorganic perovskite solar cells (IPSCs) have developed rapidly due to their good thermal stability and the bandgap suitable for perovskite/silicon tandem solar cells. However, the large openâ€�circuit voltage (VOC) deficit derived from the surface defects and the energy level structure mismatch impede the development of device performance, especially in the Pâ€�Iâ€�N structure IPSCs. Herein, an innovative in situ etching (ISE) treatment method is proposed to reduce surface defects through methanol without additional passivator. It is found that the perovskite films treated with methanol result in a slight excess of PbI2 on the surface and inserted into the grain boundaries. Therefore, the successful decrease of surface defects by methanol and the passivation of grain boundary defects by PbI2 greatly reduce the trap density of perovskite films. And the larger work function of PbI2 contributes to the energy band of perovskite surface bending downward and forms gradient energy level alignment at the I/N interface, which accelerates extraction of charge carriers. As a result, the efficiency of CsPbI2.85Br0.15 inverted IPSC is enhanced from 16.00% to 19.34%, which is one of the mostly efficient IPSCs. This work provides an original idea without additional passivator to manage the defects of inorganic perovskite.

Stoichiometric Dissolution of Defective CsPbI<sub>2</sub>Br Surfaces for Inorganic Solar Cells with 17.5% Efficiency

Stoichiometric Dissolution of Defective CsPbI 2 Br Surfaces for Inorganic Solar Cells with 17.5% Efficiency

Synchronous Surface Reconstruction and Defect Passivation for High-Performance Inorganic Perovskite Solar Cells.

Surface Reconstruction Strategy Improves the All-Inorganic CsPbIBr2 Based Perovskite Solar Cells and Photodetectors Performance

In Situ Forming of a 2D Inorganic Perovskite Capping Layer by Surface Reconstruction for Efficient and Stable CsPbI2Br Perovskite Solar Cells

Surface Defects Management by In Situ Etching with Methanol for Efficient Inverted Inorganic Perovskite Solar Cells

Effective defect passivation with a designer ionic molecule for high-efficiency vapour-deposited inorganic phase-pure CsPbBr3 perovskite solar cells

A Facile Surface Passivation Method for Efficient Inorganic CsPbI2Br Perovskite Solar Cells with Efficiencies over 15%

Phase transition induced recrystallization and low surface potential barrier leading to 10.91%-efficient CsPbBr3 perovskite solar cells

Surface Defects Passivation with Organic Salt for Highly Stable and Efficient Lead-Free Cs<sub>3</sub>Sb<sub>2</sub>I<sub>9</sub> Perovskite Solar Cells

Synchronous surface reconstruction and grain boundary healing toward efficient and stable inverted CsPbI3 perovskite solar cells

Spatially selective defect management of CsPbI3 films for high-performance carbon-based inorganic perovskite solar cells

Surface Defects Passivation with Organic Salt for Highly Stable and Efficient Lead-Free Cs 3 Sb 2 I 9 Perovskite Solar Cells

Simultaneous dual-interface and bulk defect passivation for high-efficiency and stable CsPbI2Br perovskite solar cells

Defect‐Engineering‐Enabled High‐Efficiency All‐Inorganic Perovskite Solar Cells

Reconstructing the Amorphous and Defective Surface for Efficient and Stable Perovskite Solar Cells

Surface in situ reconstruction of inorganic perovskite films enabling long carrier lifetimes and solar cells with 21% efficiency

Efficient and Stable CsPbI3 Solar Cells Via Regulating Lattice Distortion with Surface Organic Terminal Groups

Ionic Liquid Surface Treatment-Induced Crystal Growth of CsPbIBr2 Perovskite for High-Performance Solar Cells

Healing the defects in CsPbI3 solar cells by CsPbBr3 quantum dots

Tailored Lattice “Tape” to Confine Tensile Interface for 11.08%‐Efficiency All‐Inorganic CsPbBr 3 Perovskite Solar Cell with an Ultrahigh Voltage of 1.702 V