Abstract:While caesium lead bromide (CsPbBr 3 ) is promising for highly stable perovskite solar cells (PSCs), the usual solution-based methods require tedious multistep spin coating processes, which imposes a practical barrier against scaling up to large areas for industrial exploitation. Although sequential vapour deposition (SVD) can meet commercial requirements, these films are limited by high trap density and impure phases, resulting in poor performance of PSCs. Here, we obtained low-trap density and effectively phase-pure CsPbBr 3 films (grain size > 3 μm, trap density < 4 × 10 15 cm −3 ) by systematic defect and phase management. With the identification of a molecular ionic liquid from theoretical simulation, we find that such a designer molecule can form multiple bonding interactions with the perovskite phase. This results in significantly enhanced crystallization of the CsPbBr 3 phase, and more importantly, effective passivation of well recognized Cs- and Br-vacancy defects. CsPbBr 3 PSCs with simplified architecture using carbon as electrodes without hole transport layer (HTL) achieved highest power conversion efficiency (PCE) of up to 11.21% for small area devices (0.04 cm 2 ) and 9.18% for large area devices (1 cm 2 ). The unencapsulated devices exhibited excellent long-term stability, maintaining over 91% of the initial PCE after 100 days in ambient air at a humidity of ∼55%. This work also provides a valuable approach to process phase-pure, low-defect, and large-area inorganic CsPbBr 3 perovskite films for efficient and stable optoelectronic devices.

A Facile Surface Passivation Method for Efficient Inorganic CsPbI2Br Perovskite Solar Cells with Efficiencies over 15%

Surface Passivation of All‐Inorganic CsPbI 2 Br with a Fluorinated Organic Ammonium Salt for Perovskite Solar Cells with Efficiencies over 16%

Surface Passivation of All‐Inorganic CsPbI2Br with a Fluorinated Organic Ammonium Salt for Perovskite Solar Cells with Efficiencies over 16%

Defect Passivation of CsPbIBr2 Perovskites for High-Performance Solar Cells with Large Open-Circuit Voltage of 1.28 V

Enhanced Efficiency and Stability of Inverted CsPbI2Br Perovskite Solar Cells Via Fluorinated Organic Ammonium Salt Surface Passivation.

Enhanced Efficiency and Stability of All‐Inorganic CsPbI2Br Perovskite Solar Cells by Organic and Ionic Mixed Passivation

High Efficiency (16.37%) of Cesium Bromide—Passivated All‐Inorganic CsPbI2Br Perovskite Solar Cells

Synchronous Surface Reconstruction and Defect Passivation for High-Performance Inorganic Perovskite Solar Cells.

Effective defect passivation with a designer ionic molecule for high-efficiency vapour-deposited inorganic phase-pure CsPbBr3 perovskite solar cells

Defect Passivation of CsPbI2Br Perovskites Through Zn(II) Doping: Toward Efficient and Stable Solar Cells

Fluorinated organic ammonium salt passivation for high-efficiency and stable inverted CsPbI2Br perovskite solar cells

Effective Surface Treatment for Efficient and Stable Inverted Inorganic CsPbI2Br Perovskite Solar Cells

Efficient and Stable Perovskite Solar Cells Via CsPF6 Passivation of Perovskite Film Defects

Efficient and Stable Perovskite Solar Cells via CsPF 6 Passivation of Perovskite Film Defects

Effective Surface Passivation for Stable and High-Performance Inverted CsPbI2Br Perovskite Solar Cells with Efficiency over 15%

Surface passivation for enhancing photovoltaic performance of carbon-based CsPbI3 perovskite solar cells

Passivation Effect of CsPbBr3 Films Based on SnBr4 Post-Treatment

Surface passivation of perovskite films by potassium bis(fluorosulfonyl)imide for efficient solar cells

Highly‐Stable CsPbI 3 Perovskite Solar Cells with an Efficiency of 21.11% via Fluorinated 4‐Amino‐Benzoate Cesium Bifacial Passivation

Surface Defects Passivation with Organic Salt for Highly Stable and Efficient Lead-Free Cs<sub>3</sub>Sb<sub>2</sub>I<sub>9</sub> Perovskite Solar Cells

Dual Passivation Strategy for High Efficiency Inorganic CsPbI2Br Solar Cells