Abstract:High quality CsPbI2Br film is achieved though crystallization regulation by introducing a metastable lewis acid‐base adduct of PbX2‐TBP. Preferential decomposition of such adducts at low temperature annealing leads to formation of perovskite seeds, followed by crystal growth assisted by PbX2‐DMSO. PSCs constructed with the optimized CsPbI2Br film demonstrate a remarkable PCE of 16.5%, with an impressive VOC reaching 1.3 V. All inorganic perovskite based on CsPbI2Br has attracted significant attention due to its relatively thermal stable structure compare to its hybrid counterparts. With a wide bandgap of 1.9 eV and excellent light absorption capability, it has been extensively explored for applications in indoor photovoltaics and as a front absorber in tandem devices. However, the uncontrollable crystallization process during solvent evaporation and thermal annealing leads to both macroscopic defects like cracks and microscopic defects such as voids. In this study, a metastable adduct with lead (II) halides by incorporating 4‐tert‐butyl pyridine as a volatile Lewis base monodentate ligand in the precursor solution is formed. The strategic preferential decomposition of the adduct during the early‐stage low‐temperature annealing facilitated the desorption of lead (II) halides, inducing antisolvent‐free heterogenous nucleation. This, in turn, promoted crystal growth during subsequent high‐temperature annealing, resulting in dense films with low defect density. As a result, a maximum open‐circuit voltage of 1.30 V is achieved with the champion power conversion efficiency of 16.5% in CsPbI2Br‐based perovskite solar cell. The work reveals a new mechanism of using Lewis acid‐base adduct to obtain high quality perovskite films other than hindering crystallization in traditional way.

Stoichiometric Dissolution of Defective CsPbI 2 Br Surfaces for Inorganic Solar Cells with 17.5% Efficiency

Synchronous Surface Reconstruction and Defect Passivation for High-Performance Inorganic Perovskite Solar Cells.

Effective defect passivation with a designer ionic molecule for high-efficiency vapour-deposited inorganic phase-pure CsPbBr3 perovskite solar cells

Surface Defects Management by In Situ Etching with Methanol for Efficient Inverted Inorganic Perovskite Solar Cells

In Situ Forming of a 2D Inorganic Perovskite Capping Layer by Surface Reconstruction for Efficient and Stable CsPbI2Br Perovskite Solar Cells

Surface Reconstruction Strategy Improves the All-Inorganic CsPbIBr2 Based Perovskite Solar Cells and Photodetectors Performance

Phase transition induced recrystallization and low surface potential barrier leading to 10.91%-efficient CsPbBr3 perovskite solar cells

Surface Defects Passivation with Organic Salt for Highly Stable and Efficient Lead-Free Cs 3 Sb 2 I 9 Perovskite Solar Cells

Synchronous surface reconstruction and grain boundary healing toward efficient and stable inverted CsPbI3 perovskite solar cells

A Facile Surface Passivation Method for Efficient Inorganic CsPbI2Br Perovskite Solar Cells with Efficiencies over 15%

Reconstructing the Amorphous and Defective Surface for Efficient and Stable Perovskite Solar Cells

Spatially selective defect management of CsPbI3 films for high-performance carbon-based inorganic perovskite solar cells

Ionic Liquid Surface Treatment-Induced Crystal Growth of CsPbIBr2 Perovskite for High-Performance Solar Cells

Surface in situ reconstruction of inorganic perovskite films enabling long carrier lifetimes and solar cells with 21% efficiency

Illumination Enhanced Crystallization and Defect Passivation for High Performance CsPbI3 Perovskite Solar Cells by Sacrificing Dye

Tailored Lattice “Tape” to Confine Tensile Interface for 11.08%‐Efficiency All‐Inorganic CsPbBr 3 Perovskite Solar Cell with an Ultrahigh Voltage of 1.702 V

Antisolvent‐Free Heterogenous Nucleation Enabled by Employing 4‐Tert‐Butyl Pyridine Additive and Two‐Step Annealing for Efficient CsPbI2Br Perovskite Solar Cells

Multistrategy Toward Highly Efficient and Stable CsPbI 2 Br Perovskite Solar Cells Based on Dopant‐Free Poly(3‐Hexylthiophene)

Surface Sn(IV) Hydrolysis Improves Inorganic Sn–Pb Perovskite Solar Cells

Defect‐Engineering‐Enabled High‐Efficiency All‐Inorganic Perovskite Solar Cells

Intermediate Phase Modification Enables High‐Performance Iodine‐Rich Inorganic Perovskite Solar Cells with 3000‐Hour Stability