Abstract:The all-inorganic cesium lead bromide (CsPbBr3) perovskite solar cells (PSCs) have attracted considerable interest because of their outstanding environmental stability and low manufacturing cost. However, the state-of-the-art mesoscopic titanium dioxide (TiO2) electron-transporting layers (ETLs) always present low electron mobility, are destructive to perovskites under ultraviolet light illumination, as well as possess high sintering temperature. Nanostructured tin dioxide (SnO2) is a promising electron-transporting material for high-efficiency PSCs due to matching energy-level alignment with the perovskite layer, improved optical transparency, high electron mobility, excellent photostability, and low-temperature processing. Furthermore, rapid but poorly controlled perovskite crystallization makes it difficult to scale up planar PSCs for industrial applications. To address this issue, we adopt a dimensional SnO2 ETL to change the surface wettability for uniform perovskite coverage over large areas and the growth of large-sized CsPbBr3 grains, resulting in a maximum grain size of 1.65 μm. Moreover, the dimensional SnO2 ETL could increase the interfacial contact area between the CsPbBr3 layer and the ETL and enhance the electronic contact for efficient electron extraction to suppress or to eliminate the notorious hysteresis behavior. As expected, a power conversion efficiency (PCE) of 9.51% with an almost hysteresis-free phenomenon is achieved through dimensionality control of SnO2 films attributed to the remarkably enhanced light harvesting, accelerated electron extraction, diminished defect density, and reduced charge recombination. Upon further interfacial modification with graphene quantum dots (GQDs), the PSC based on the two-dimensional SnO2 ETL achieves a champion PCE of 10.34% due to the improved energy-level alignment at the device interface. Moreover, the best all-inorganic CsPbBr3 PSC free of encapsulation retains 93% of initial efficiency over 10 days at 80% relative humidity. This work provides an effective dimensionality control strategy for optimized charge transportation and enlarged perovskite grain size to make stable and efficient all-inorganic CsPbBr3 PSCs.

Tailored Lattice “Tape” to Confine Tensile Interface for 11.08%‐Efficiency All‐Inorganic CsPbBr 3 Perovskite Solar Cell with an Ultrahigh Voltage of 1.702 V

Phase transition induced recrystallization and low surface potential barrier leading to 10.91%-efficient CsPbBr3 perovskite solar cells

Effective defect passivation with a designer ionic molecule for high-efficiency vapour-deposited inorganic phase-pure CsPbBr3 perovskite solar cells

Mitigating interfacial and bulk defects via chlorine modulation for HTL-free all-inorganic CsPbI2Br carbon-based perovskite solar cells with efficiency over 14%

Stoichiometric Dissolution of Defective CsPbI 2 Br Surfaces for Inorganic Solar Cells with 17.5% Efficiency

Secondary Crystallization Strategy for Highly Efficient Inorganic CsPbI2Br Perovskite Solar Cells with Efficiency Approaching 17％

Surface Regulation via Carboxylate Polymer for Efficient and Stable CsPbI2Br Perovskite Solar Cells

Tri‐Brominated Perovskite Film Management and Multiple‐Ionic Defect Passivation for Highly Efficient and Stable Solar Cells

Multistrategy Toward Highly Efficient and Stable CsPbI 2 Br Perovskite Solar Cells Based on Dopant‐Free Poly(3‐Hexylthiophene)

Highly‐Stable CsPbI 3 Perovskite Solar Cells with an Efficiency of 21.11% via Fluorinated 4‐Amino‐Benzoate Cesium Bifacial Passivation

Cl-terminated Ti3C2 MXene-modulated carbon/CsPbIBr2 interface boosting efficiency and stability of all-inorganic perovskite solar cells

PbS/CdS heterojunction thin layer affords high-performance carbon-based all-inorganic solar cells

Surface Reconstruction Strategy Improves the All-Inorganic CsPbIBr2 Based Perovskite Solar Cells and Photodetectors Performance

n-type absorber by Cd2+ doping achieves high-performance carbon-based CsPbIBr2 perovskite solar cells

Modifying Surface Termination of CsPbI 3 Grain Boundaries by 2D Perovskite Layer for Efficient and Stable Photovoltaics

High Efficiency (16.37%) of Cesium Bromide—Passivated All‐Inorganic CsPbI2Br Perovskite Solar Cells

Constructing an Interfacial Gradient Heterostructure Enables Efficient CsPbI3 Perovskite Solar Cells and Printed Minimodules

High‐Performance CsPbIxBr3‐x All‐Inorganic Perovskite Solar Cells with Efficiency over 18% Via Spontaneous Interfacial Manipulation

Tailoring C60 for Efficient Inorganic CsPbI2 Br Perovskite Solar Cells and Modules

Dimensionality Control of SnO2 Films for Hysteresis-Free, All-Inorganic CsPbBr3 Perovskite Solar Cells with Efficiency Exceeding 10

Surface passivation and hole extraction: Bifunctional interfacial engineering toward high-performance all-inorganic CsPbIBr 2 perovskite solar cells with efficiency exceeding 12%