Abstract:Abstract The poor interface quality between cesium lead triiodide (CsPbI 3 ) perovskite and the electron transport layer limits the stability and efficiency of CsPbI 3 perovskite solar cells (PSCs). Herein, a 4‐amino‐2,3,5,6‐tetrafluorobenzoate cesium (ATFC) is designed as a bifacial defect passivator to tailor the perovskite/TiO 2 interface. The comprehensive experiments demonstrate that ATFC can not only optimize the conductivity, electron mobility, and energy band structure of the TiO 2 layer by passivation of the undercoordinated Ti 4+ , oxygen vacancy ( V O ), and free OH defects but also promote the yield of high‐quality CsPbI 3 film by synergistic passivation of undercoordinated Pb 2+ defects with the CO group and F atom, and limiting I − migration via F···I interaction. Benefiting from the above interactions, the ATFC‐modified CsPbI 3 device yields a champion power conversion efficiency (PCE) of 21.11% and an excellent open‐circuit voltage ( V OC ) of 1.24 V. Meanwhile, the optimized CsPbI 3 PSC maintains 92.74% of its initial efficiency after aging 800 h in air atmosphere, and has almost no efficiency attenuation after tracking at maximum power point for 350 h.

What problem does this paper attempt to address?

This paper attempts to solve the problems of poor stability and low efficiency of cesium - lead - iodine perovskite solar cells (CsPbI3 PSCs) caused by poor interface quality. Specifically, the article points out that there are various defects at the interface between cesium - lead - iodine perovskite (CsPbI3) and the electron - transport layer (such as TiO2), such as uncoordinated cation defects (Pb2+ and Cs+), vacancies (VPb and VI) and antisite defects (IPb), which limit the performance of the device. These defects not only act as non - radiative recombination centers to trap photogenerated carriers, resulting in high non - radiative losses, but also increase the ability of the perovskite film to adsorb moisture and oxygen, accelerating the degradation of the film/device. In order to improve the performance of CsPbI3 PSCs, it is urgent to suppress Pb - related defects at the perovskite/charge - transport - layer interface. To this end, the research team designed and synthesized cesium 4 - amino - 2,3,5,6 - tetrafluorobenzoate (ATFC) as a double - sided defect passivator to optimize the perovskite/TiO2 interface. ATFC interacts with uncoordinated Ti4+, oxygen vacancies and free hydroxyl groups on the TiO2 surface through electron - coupling interactions and hydrogen bonds, improving the conductivity, electron mobility and energy - band structure of the TiO2 layer; at the same time, the - C = O group of ATFC and its adjacent F1 atom cooperate with the uncoordinated Pb2+ defect on the buried surface to form a coordination bond, and limit I− migration through non - covalent F···I interactions, thereby obtaining a high - quality CsPbI3 film and improving its stability and photoelectric conversion efficiency (PCE). Finally, the ATFC - modified CsPbI3 PSCs achieved a champion PCE of 21.11% and an excellent open - circuit voltage (VOC) of 1.24 V, and could still maintain 92.74% of the initial efficiency after aging for 800 hours in an air environment, showing excellent operational stability.

Highly‐Stable CsPbI 3 Perovskite Solar Cells with an Efficiency of 21.11% via Fluorinated 4‐Amino‐Benzoate Cesium Bifacial Passivation

Surface Passivation of CsPbI 3 Films for Efficient and Stable Hole-Transporting Layer-Free Carbon-Based Perovskite Solar Cells

Fluorinated organic ammonium salt passivation for high-efficiency and stable inverted CsPbI2Br perovskite solar cells

Enhanced Efficiency and Stability of Inverted CsPbI2Br Perovskite Solar Cells Via Fluorinated Organic Ammonium Salt Surface Passivation.

Surface Passivation of All‐Inorganic CsPbI2Br with a Fluorinated Organic Ammonium Salt for Perovskite Solar Cells with Efficiencies over 16%

Fluorine Functionalized MXene QDs for Near‐Record‐Efficiency CsPbI3 Solar Cell with High Open‐Circuit Voltage

Enhancing perovskite solar cells efficiency through cesium fluoride mediated surface lead iodide modulation

Precise Nucleation Regulation and Defect Passivation for Highly Efficient and Stable Carbon-Based CsPbI2Br Perovskite Solar Cells

Surface Passivation of All‐Inorganic CsPbI 2 Br with a Fluorinated Organic Ammonium Salt for Perovskite Solar Cells with Efficiencies over 16%

24.96%‐Efficiency FACsPbI3 Perovskite Solar Cells Enabled by an Asymmetric 1,3‐Thiazole‐2,4‐Diammonium

Treating CsPbI3 Perovskite with Pyrrolidinium Iodide to Improve the Performance of Perovskite Solar Cells

Multistrategy Toward Highly Efficient and Stable CsPbI2Br Perovskite Solar Cells Based on Dopant‐Free Poly(3‐Hexylthiophene)

Multistrategy Toward Highly Efficient and Stable CsPbI 2 Br Perovskite Solar Cells Based on Dopant‐Free Poly(3‐Hexylthiophene)

Tri‐Brominated Perovskite Film Management and Multiple‐Ionic Defect Passivation for Highly Efficient and Stable Solar Cells

Advanced Modification of Perovskite Surfaces for Defect Passivation and Efficient Charge Extraction in Air-Stable CsPbBr3 Perovskite Solar Cells

Adjustable Skeleton of Bilateral Lewis Base Passivator for CsPbI 3 Perovskite Solar Cells with PCE over 20% and Superior Stability

Bifunctional Passivation for Efficient and Stable Low-Temperature Processed All-Inorganic CsPbIBr2 Perovskite Solar Cells

Multifunctional Interface Modification Enables Efficient and Stable HTL-Free Carbon-Electroded CsPbI2Br Perovskite Solar Cells

High Efficiency (16.37%) of Cesium Bromide—Passivated All‐Inorganic CsPbI2Br Perovskite Solar Cells

Synergistic Effect of Defects Passivation and Energy Level Alignment Realizing P3HT‐Based High‐Efficiency CsPbI3 Perovskite Solar Cells

An Extraordinary Antisolvent Ethyl Cyanoformate for Achieving High Efficiency and Stability P3HT‐Based CsPbI3 Perovskite Solar Cells