Abstract:In this work, an innovative in situ etching treatment method to reduce surface defects of CsPbI2.85Br0.15 perovskite films by using methanol without additional passivator is proposed. A slight excess of PbI2 is generated on perovskite surface, which is beneficial to form gradient energy level alignment. Eventually, a champion CsPbI2.85Br0.15 inorganic perovskite solar cell with efficiency of 19.34% is achieved. Inorganic perovskite solar cells (IPSCs) have developed rapidly due to their good thermal stability and the bandgap suitable for perovskite/silicon tandem solar cells. However, the large openâ€�circuit voltage (VOC) deficit derived from the surface defects and the energy level structure mismatch impede the development of device performance, especially in the Pâ€�Iâ€�N structure IPSCs. Herein, an innovative in situ etching (ISE) treatment method is proposed to reduce surface defects through methanol without additional passivator. It is found that the perovskite films treated with methanol result in a slight excess of PbI2 on the surface and inserted into the grain boundaries. Therefore, the successful decrease of surface defects by methanol and the passivation of grain boundary defects by PbI2 greatly reduce the trap density of perovskite films. And the larger work function of PbI2 contributes to the energy band of perovskite surface bending downward and forms gradient energy level alignment at the I/N interface, which accelerates extraction of charge carriers. As a result, the efficiency of CsPbI2.85Br0.15 inverted IPSC is enhanced from 16.00% to 19.34%, which is one of the mostly efficient IPSCs. This work provides an original idea without additional passivator to manage the defects of inorganic perovskite.

Surface in situ reconstruction of inorganic perovskite films enabling long carrier lifetimes and solar cells with 21% efficiency

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Strontium‐Doped CsPbI 3 Quantum Dots as an Interfacial Layer for Efficient Inorganic Perovskite Solar Cells

In Situ Reconstruction of Hole‐Selective Perovskite Heterojunction with Graded Energetics Toward Highly Efficient and Stable Solar Cells

Surface Defects Management by In Situ Etching with Methanol for Efficient Inverted Inorganic Perovskite Solar Cells

Surface Reconstruction Strategy Improves the All-Inorganic CsPbIBr2 Based Perovskite Solar Cells and Photodetectors Performance

In Situ Forming of a 2D Inorganic Perovskite Capping Layer by Surface Reconstruction for Efficient and Stable CsPbI2Br Perovskite Solar Cells

Critical Role of Post-Treatment Induced Surface Reconstruction for High Performance Inorganic Tin-Lead Perovskite Solar Cells

Synchronous Surface Reconstruction and Defect Passivation for High-Performance Inorganic Perovskite Solar Cells.

Stoichiometric Dissolution of Defective CsPbI 2 Br Surfaces for Inorganic Solar Cells with 17.5% Efficiency

Interface Engineering for All‐Inorganic CsPbIBr 2 Perovskite Solar Cells with Enhanced Power Conversion Efficiency over 11%

Surface Lattice Engineering Enables Efficient Inverted Perovskite Solar Cells

Over 12% efficient CsSnI 3 perovskite solar cells enabled by surface post-treatment with bi-functional polar molecules

Constructing an Interfacial Gradient Heterostructure Enables Efficient CsPbI3 Perovskite Solar Cells and Printed Minimodules

Effective Surface Treatment for Efficient and Stable Inverted Inorganic CsPbI2Br Perovskite Solar Cells

Surface passivation and hole extraction: Bifunctional interfacial engineering toward high-performance all-inorganic CsPbIBr 2 perovskite solar cells with efficiency exceeding 12%

High‐Performance CsPbIxBr3‐x All‐Inorganic Perovskite Solar Cells with Efficiency over 18% Via Spontaneous Interfacial Manipulation

High Efficient Hole Extraction and Stable All-Bromide Inorganic Perovskite Solar Cells via Derivative-Phase Gradient Bandgap Architecture

A Surface‐Reconstructed Bilayer Heterojunction Enables Efficient and Stable Inverted Perovskite Solar Cells

Intermediate Phase Modification Enables High‐Performance Iodine‐Rich Inorganic Perovskite Solar Cells with 3000‐Hour Stability

Dual Interfacial Design for Efficient CsPbI2Br Perovskite Solar Cells with Improved Photostability