Abstract:In this work, an innovative in situ etching treatment method to reduce surface defects of CsPbI2.85Br0.15 perovskite films by using methanol without additional passivator is proposed. A slight excess of PbI2 is generated on perovskite surface, which is beneficial to form gradient energy level alignment. Eventually, a champion CsPbI2.85Br0.15 inorganic perovskite solar cell with efficiency of 19.34% is achieved. Inorganic perovskite solar cells (IPSCs) have developed rapidly due to their good thermal stability and the bandgap suitable for perovskite/silicon tandem solar cells. However, the large openâ€�circuit voltage (VOC) deficit derived from the surface defects and the energy level structure mismatch impede the development of device performance, especially in the Pâ€�Iâ€�N structure IPSCs. Herein, an innovative in situ etching (ISE) treatment method is proposed to reduce surface defects through methanol without additional passivator. It is found that the perovskite films treated with methanol result in a slight excess of PbI2 on the surface and inserted into the grain boundaries. Therefore, the successful decrease of surface defects by methanol and the passivation of grain boundary defects by PbI2 greatly reduce the trap density of perovskite films. And the larger work function of PbI2 contributes to the energy band of perovskite surface bending downward and forms gradient energy level alignment at the I/N interface, which accelerates extraction of charge carriers. As a result, the efficiency of CsPbI2.85Br0.15 inverted IPSC is enhanced from 16.00% to 19.34%, which is one of the mostly efficient IPSCs. This work provides an original idea without additional passivator to manage the defects of inorganic perovskite.

Over 12% efficient CsSnI 3 perovskite solar cells enabled by surface post-treatment with bi-functional polar molecules

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Efficient and Stable Mesoporous CsSnI3 Perovskite Solar Cells via Imidazolium‐Based Ionic Liquid Additive

Fully Inorganic CsSnI3 Mesoporous Perovskite Solar Cells with High Efficiency and Stability Via Coadditive Engineering

Surface Sn(IV) Hydrolysis Improves Inorganic Sn–Pb Perovskite Solar Cells

Efficient inverted CsPbI3 inorganic perovskite solar cells achieved by facile surface treatment with ethanolamine

Organic‐Free and Lead‐Free Perovskite Solar Cells with Efficiency over 11%

Achieving efficient and stable inorganic CsSnI3 mesoporous perovskite solar cells via galvanic displacement reaction

PEIE-complexed SnO 2 enabled low-temperature solution fabrication of high-performance CsPbI 3 all-inorganic perovskite solar cells

PEIE-complexed SnO2 Enabled Low-Temperature Solution Fabrication of High-Performance CsPbI3 All-Inorganic Perovskite Solar Cells

Surface in situ reconstruction of inorganic perovskite films enabling long carrier lifetimes and solar cells with 21% efficiency

All inorganic CsSnI3-based perovskite solar cells: design and comprehensive optimization by SCAPS simulation and DFT study

Surface Defects Management by In Situ Etching with Methanol for Efficient Inverted Inorganic Perovskite Solar Cells

Efficient Passivation Strategy on Sn Related Defects for High Performance All‐Inorganic CsSnI3 Perovskite Solar Cells

Interface Engineering for All‐Inorganic CsPbIBr 2 Perovskite Solar Cells with Enhanced Power Conversion Efficiency over 11%

Multifunctional anion-cation modulation engineering for Sn-Pb perovskite solar cells

A single crystal derived precursor for improving the performance of CsSnI3 perovskite solar cells

Fully Inorganic CsSnI 3 -Based Solar Cells with >6% Efficiency and Enhanced Stability Enabled by Mixed Electron Transport Layer

Oxalate Pushes Efficiency of CsPb 0.7 Sn 0.3 IBr 2 Based All‐Inorganic Perovskite Solar Cells to over 14%

Efficient Passivation Strategy on Sn Related Defects for High Performance All‐Inorganic CsSnI 3 Perovskite Solar Cells

Nanoscale Local Contacts Enable Inverted Inorganic Perovskite Solar Cells with 20.8% Efficiency