Abstract:Lead‐free inorganic CsSnI2.6Br0.4 perovskite‐based solar cells with a record efficiency of 11.2% are achieved via introducing dimethyl ketoxime (DMKO) as a multifunctional additive. The grain surface located DMKO not only mitigates Sn2+ oxidation but also passivates Sn(II)‐related defects, forming an in situ encapsulation of the perovskite, which results in greatly enhanced ambient stability of the corresponding device. Organic‐free and lead‐free CsSnI3 perovskite solar cells (PSCs) have recently gained growing attention as a promising template to mitigate the thermal instability and lead toxicity of hybrid lead‐based PSCs. However, the relatively low device efficiency due to the high content of Sn(II)‐related defects hinders its further development. Herein, highly performed CsSnI3−xBrx compositional perovskite‐based PSCs are achieved by using dimethyl ketoxime (C3H7NO, DMKO) as a multifunctional additive. As a commercially used deoxidant, DMKO can effectively neutralize the oxygen molecule and reduce Sn4+ back to Sn2+, enhancing the oxidation resistance of the film. Besides, the electron‐rich oxime group (NOH) in DMKO tends to interact with Sn2+ ions with extremely low adsorption energy less than −15 eV and inhibits defect formation, resulting in films with low defect density. The corresponding PSCs deliver a considerable open‐circuit voltage (Voc) of 0.75 V with a record efficiency as high as 11.2%, which represents the highest reported efficiency for lead‐free all‐inorganic PSCs thus far. More importantly, the grain surface distributed DMKO provides an in situ encapsulation of the perovskite, which results in greatly enhanced ambient stability of the un‐encapsulated devices.

Oxalate Pushes Efficiency of CsPb 0.7 Sn 0.3 IBr 2 Based All‐Inorganic Perovskite Solar Cells to over 14%

Inorganic perovskite solar cells: an emerging member of the photovoltaic community

Organic Ligands Armored ZnO Enhances Efficiency and Stability of CsPbI2Br Perovskite Solar Cells

CsPb0.9Sn0.1IBr2 Based All-Inorganic Perovskite Solar Cells with Exceptional Efficiency and Stability.

Organic Ligands Armored ZnO Enhances Efficiency and Stability of CsPbI 2 Br Perovskite Solar Cells

Cspb0.9sn0.1ibr2 Based All-Inorganic Perovskite Solar Cells With Exceptional Efficiency And Stability

Organic‐Free and Lead‐Free Perovskite Solar Cells with Efficiency over 11%

Inorganic CsPb1−xSnxIBr2 for Efficient Wide‐Bandgap Perovskite Solar Cells

Optimize the Oxide/Perovskite Heterojunction Contact for Low Temperature High Efficiency and Stable All-inorganic CsPbI<inf>2</inf>Br Perovskite Solar Cells

Optimize the Oxide/Perovskite Heterojunction Contact for Low Temperature High Efficiency and Stable All-inorganic CsPbI<sub>2</sub>Br Perovskite Solar Cells

Secondary Crystallization Strategy for Highly Efficient Inorganic CsPbI2Br Perovskite Solar Cells with Efficiency Approaching 17％

A Buried Functional Layer for Inorganic CsPb 0.75 Sn 0.25 I 2 Br Perovskite Solar Cells

Interface Engineering for All‐Inorganic CsPbIBr 2 Perovskite Solar Cells with Enhanced Power Conversion Efficiency over 11%

Phase transition induced recrystallization and low surface potential barrier leading to 10.91%-efficient CsPbBr3 perovskite solar cells

PEIE-complexed SnO2 Enabled Low-Temperature Solution Fabrication of High-Performance CsPbI3 All-Inorganic Perovskite Solar Cells

A Buried Functional Layer for Inorganic CsPb0.75Sn0.25I2Br Perovskite Solar Cells

Highly Crystalline CsPbI2Br Films for Efficient Perovskite Solar Cells Via Compositional Engineering

A Mixed Antisolvent-Assisted Crystallization Strategy for Efficient All-Inorganic CsPbIBr2 Perovskite Solar Cells by a Low-Temperature Process

Low non-radiative recombination loss in CsPbI<inf>2</inf>Br perovskite solar cells

Deep‐Ultraviolet Photoactivation‐Assisted Contact Engineering Toward High‐Efficiency and Stable All‐Inorganic CsPbI 2 Br Perovskite Solar Cells

Low non-radiative recombination loss in CsPbI<sub>2</sub>Br perovskite solar cells