Abstract:All-inorganic perovskite cesium lead iodide/bromide (CsPbI2Br) is considered as a robust absorber for perovskite solar cells (PSCs) because of its excellent thermal stability that guarantees its long-term operation stability. Efficient CsPbI2Br PSCs are available when obtaining low energy loss, which needs efficient charge generation, less charge recombination, and balanced charge extraction. However, numerous traps in perovskites hinder the photon–electron conversion process. Herein, hierarchical manipulation of charge recombination is proposed for CsPbI2Br PSCs featuring low energy loss. Nonselective trap reduction and selective halogen vacancy passivation are performed using 2,2′-(ethylenedioxy)diethylamine and phenylbutylammonium iodide for the bottom and top contacts, respectively. Because of all-around suppressed charge recombination, balanced charge extraction and suppressed hysteresis are realized. The champion PSC achieves an open-circuit voltage of 1.30 eV, a fill factor of 80.2%, and a power conversion efficiency of 16.6% that is 28.6% higher than that of the reference device. Moreover, the thermostability of PSCs is simultaneously enhanced because of the limited defect-assisted degradation.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c13116?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c13116</a>.Details of experimental procedures, optical and electrical properties of different perovskite films, device performances of CsPbI2Br PSCs treated with different passivation agents, and ambient stability photographs of various perovskite films (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13116/suppl_file/am0c13116_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Low non-radiative recombination loss in CsPbI<inf>2</inf>Br perovskite solar cells

Low non-radiative recombination loss in CsPbI<sub>2</sub>Br perovskite solar cells

Minimizing Voltage Loss in Efficient All-Inorganic CsPbI2Br Perovskite Solar Cells Through Energy Level Alignment

An intermeshing electron transporting layer for efficient and stable CsPbI2Br perovskite solar cells with open circuit voltage over 1.3 V

Hierarchically Manipulated Charge Recombination for Mitigating Energy Loss in CsPbI 2 Br Solar Cells

Quantifying the Energy Losses in CsPbI 2 Br Perovskite Solar Cells with an Open-Circuit Voltage of up to 1.45 V

Double Side Interfacial Optimization for Low-Temperature Stable CsPbI 2 Br Perovskite Solar Cells with High Efficiency Beyond 16%

Uniform Stepped Interfacial Energy Level Structure Boosts Efficiency and Stability of CsPbI 2 Br Solar Cells

High Efficiency (16.37%) of Cesium Bromide—Passivated All‐Inorganic CsPbI2Br Perovskite Solar Cells

Using 4‐Chlorobenzoic Acid Layer Toward Stable and Low‐Cost CsPbI 2 Br Perovskite Solar Cells

A double perovskite participation for promoting stability and performance of Carbon-Based CsPbI2Br perovskite solar cells

Optimize the Oxide/Perovskite Heterojunction Contact for Low Temperature High Efficiency and Stable All-inorganic CsPbI<inf>2</inf>Br Perovskite Solar Cells

Efficiency Potential and Voltage Loss of Inorganic CsPbI2Br Perovskite Solar Cells

The CsPbI2Br perovskite solar cell with high Voc by crystallization optimization

Secondary Crystallization Strategy for Highly Efficient Inorganic CsPbI2Br Perovskite Solar Cells with Efficiency Approaching 17％

Enhanced Efficiency and Stability of All‐Inorganic CsPbI2Br Perovskite Solar Cells by Organic and Ionic Mixed Passivation

Optimizing the working mechanism of the CsPbBr3-based inorganic perovskite solar cells for enhanced efficiency

High-performance CsPbI2Br perovskite solar cells based on excess CsBr and ultra thin MgF2 layer

Deep‐Ultraviolet Photoactivation‐Assisted Contact Engineering Toward High‐Efficiency and Stable All‐Inorganic CsPbI 2 Br Perovskite Solar Cells

High‐Efficiency Carbon‐Based CsPbIBr 2 Solar Cells with Interfacial Energy Loss Suppressed by a Thin Bulk‐Heterojunction Layer

Intermediate‐Adduct‐Assisted Growth of Stable CsPbI 2 Br Inorganic Perovskite Films for High‐Efficiency Semitransparent Solar Cells