Abstract:A solution is sought for the buried interface issues within CsPbI2Br‐based perovskite solar cells. Addressing this, a multifunctional electron transporting layer (ETL) using a PbCl2‐modified ZnO nanocomposite is introduced. By tuning bandgap and energy levels, the ETL enhances energy alignment with CsPbI2Br. Integration of residual PbCl2 at the buried interface minimizes defects, ameliorating film quality. CsPbI2Br perovskite solar cells (PSCs) have garnered significant attention owing to their remarkable thermal stability and desirable bandgap. However, CsPbI2Br‐based devices still face critical challenges, particularly at the interfaces between the active layer and adjacent components. In this study, a multifunctional ZnO composition has developed as the electron transporting layer (ETL) for CsPbI2Br PSCs, enabling simultaneous efficient charge extraction and passivation of buried interface defects in CsPbI2Br. The nanocomposite, composed of PbCl2‐modified ZnO (PbCl2‐ZnO), facilitates the regulation of bandgap and conduction band to align the energy level of ETL and CsPbI2Br. Additionally, the residual PbCl2 at the buried interface of the perovskite incorporates into the perovskite lattice, reducing I defect and thus improving film quality. The improved energy level alignment at the ETL/CsPbI2Br interface and the suppressed I defect‐induced carrier nonradiative recombination result in a remarkable reduction in energy loss from 0.73 to 0.52 eV. Finally, the PbCl2‐ZnO hybrid nanocomposite ETL significantly enhances the efficiency of CsPbI2Br PSCs, increasing it from 14.15% to 17.46%, representing one of the highest reported power conversion efficiency (PCE) values for CsPbI2Br PSCs. These findings demonstrate the potential of PbCl2‐ZnO hybrid nanocomposite as an effective ETL for CsPbI2Br PSCs.

An intermeshing electron transporting layer for efficient and stable CsPbI2Br perovskite solar cells with open circuit voltage over 1.3 V

Low non-radiative recombination loss in CsPbI<inf>2</inf>Br perovskite solar cells

Low non-radiative recombination loss in CsPbI<sub>2</sub>Br perovskite solar cells

Double Side Interfacial Optimization for Low-Temperature Stable CsPbI 2 Br Perovskite Solar Cells with High Efficiency Beyond 16%

Interface Engineering for All-Inorganic CsPbI2Br Perovskite Solar Cells with Efficiency over 14%

Minimizing Open-Circuit Voltage Deficit Via Interface Engineering for Highly Efficient CsPbI2Br Perovskite Solar Cells

Intermediate‐Adduct‐Assisted Growth of Stable CsPbI 2 Br Inorganic Perovskite Films for High‐Efficiency Semitransparent Solar Cells

Polymer‐Passivated Inorganic Cesium Lead Mixed‐Halide Perovskites for Stable and Efficient Solar Cells with High Open‐Circuit Voltage over 1.3 V

Achieving 17.46% Efficiency CsPbI2Br Perovskite Solar Cells via Multifunction Lead Chloride‐Modified ZnO Electron Transporting Layer

3D-2D-0D Interface Profiling for Record Efficiency All-Inorganic CsPbBrI2 Perovskite Solar Cells with Superior Stability

Quantifying the Energy Losses in CsPbI 2 Br Perovskite Solar Cells with an Open-Circuit Voltage of up to 1.45 V

Precise Nucleation Regulation and Defect Passivation for Highly Efficient and Stable Carbon-Based CsPbI2Br Perovskite Solar Cells

Optimizing the working mechanism of the CsPbBr3-based inorganic perovskite solar cells for enhanced efficiency

Efficient carbon-based CsPbI<sub>2</sub>Br perovskite solar cells using bifunctional polymer modification

CsPbI3 Based All‐Inorganic Perovskite Solar Cells: Further Performance Enhancement of the Electron Transport Layer‐Free Structure from Device Simulation

Iodine-Optimized Interface for Inorganic CsPbI2Br Perovskite Solar Cell to Attain High Stabilized Efficiency Exceeding 14.

Minimizing Voltage Loss in Efficient All-Inorganic CsPbI2Br Perovskite Solar Cells Through Energy Level Alignment

Polymer-Passivated Inorganic Cesium Lead Halide Perovskites for High-Voltage and High-Efficiency Solar Cells

High Efficiency (16.37%) of Cesium Bromide—Passivated All‐Inorganic CsPbI2Br Perovskite Solar Cells

Constructing an Interfacial Gradient Heterostructure Enables Efficient CsPbI3 Perovskite Solar Cells and Printed Minimodules

Interfacial Energy Level Tuning for Efficient and Thermostable CsPbI2Br Perovskite Solar Cells