Abstract:A solution is sought for the buried interface issues within CsPbI2Br‐based perovskite solar cells. Addressing this, a multifunctional electron transporting layer (ETL) using a PbCl2‐modified ZnO nanocomposite is introduced. By tuning bandgap and energy levels, the ETL enhances energy alignment with CsPbI2Br. Integration of residual PbCl2 at the buried interface minimizes defects, ameliorating film quality. CsPbI2Br perovskite solar cells (PSCs) have garnered significant attention owing to their remarkable thermal stability and desirable bandgap. However, CsPbI2Br‐based devices still face critical challenges, particularly at the interfaces between the active layer and adjacent components. In this study, a multifunctional ZnO composition has developed as the electron transporting layer (ETL) for CsPbI2Br PSCs, enabling simultaneous efficient charge extraction and passivation of buried interface defects in CsPbI2Br. The nanocomposite, composed of PbCl2‐modified ZnO (PbCl2‐ZnO), facilitates the regulation of bandgap and conduction band to align the energy level of ETL and CsPbI2Br. Additionally, the residual PbCl2 at the buried interface of the perovskite incorporates into the perovskite lattice, reducing I defect and thus improving film quality. The improved energy level alignment at the ETL/CsPbI2Br interface and the suppressed I defect‐induced carrier nonradiative recombination result in a remarkable reduction in energy loss from 0.73 to 0.52 eV. Finally, the PbCl2‐ZnO hybrid nanocomposite ETL significantly enhances the efficiency of CsPbI2Br PSCs, increasing it from 14.15% to 17.46%, representing one of the highest reported power conversion efficiency (PCE) values for CsPbI2Br PSCs. These findings demonstrate the potential of PbCl2‐ZnO hybrid nanocomposite as an effective ETL for CsPbI2Br PSCs.

Optimize the Oxide/Perovskite Heterojunction Contact for Low Temperature High Efficiency and Stable All-inorganic CsPbI<inf>2</inf>Br Perovskite Solar Cells

Optimize the Oxide/Perovskite Heterojunction Contact for Low Temperature High Efficiency and Stable All-inorganic CsPbI<sub>2</sub>Br Perovskite Solar Cells

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Improve the Oxide/perovskite Heterojunction Contact for Low Temperature High Efficiency and Stable All-Inorganic CsPbI2Br Perovskite Solar Cells

Inorganic perovskite solar cells: an emerging member of the photovoltaic community

Double Side Interfacial Optimization for Low-Temperature Stable CsPbI 2 Br Perovskite Solar Cells with High Efficiency Beyond 16%

Deep‐Ultraviolet Photoactivation‐Assisted Contact Engineering Toward High‐Efficiency and Stable All‐Inorganic CsPbI 2 Br Perovskite Solar Cells

Organic Ligands Armored ZnO Enhances Efficiency and Stability of CsPbI2Br Perovskite Solar Cells

Organic Ligands Armored ZnO Enhances Efficiency and Stability of CsPbI 2 Br Perovskite Solar Cells

Oxalate Pushes Efficiency of CsPb 0.7 Sn 0.3 IBr 2 Based All‐Inorganic Perovskite Solar Cells to over 14%

Low non-radiative recombination loss in CsPbI<inf>2</inf>Br perovskite solar cells

Low non-radiative recombination loss in CsPbI<sub>2</sub>Br perovskite solar cells

Interface Engineering of Low Temperature Processed All-Inorganic CsPbI2Br Perovskite Solar Cells Toward PCE Exceeding 14%

An intermeshing electron transporting layer for efficient and stable CsPbI2Br perovskite solar cells with open circuit voltage over 1.3 V

Achieving 17.46% Efficiency CsPbI2Br Perovskite Solar Cells via Multifunction Lead Chloride‐Modified ZnO Electron Transporting Layer

The design and performance optimization of all-inorganic CsPbIBr2/CsSnI3 heterojunction perovskite solar cells

Improved Interface Contact for Highly Stable All-Inorganic CsPbI2Br Planar Perovskite Solar Cells

Interface Engineering for All‐Inorganic CsPbIBr 2 Perovskite Solar Cells with Enhanced Power Conversion Efficiency over 11%

Uniform Stepped Interfacial Energy Level Structure Boosts Efficiency and Stability of CsPbI 2 Br Solar Cells

Optimizing the working mechanism of the CsPbBr3-based inorganic perovskite solar cells for enhanced efficiency

Low‐Temperature Solution‐Processed ZnO Electron Transport Layer for Highly Efficient and Stable Planar Perovskite Solar Cells with Efficiency over 20%