Abstract:All-inorganic cesium lead iodine perovskite materials (CsPbI3) have been widely studied and applied to PSCs because of their excellent thermo-chemical stability and suitable bandgap. However, CsPbI3 still faces the issue of phase transitions under humid conditions. In this study, cesium trimethylacetate (CsTa) organic cesium salt is employed as an additive in the CsPbI2.84Br0.16 film. The results show that CsTa can have multifunctional effects on CsPbI2.84Br0.16 perovskite stability. The steric hindrance blocking effect of Ta- anions can efficiently prevent the tilt of the [PbI6](4-) octahedrons to inhibit the phase transition process from the corner-shared perovskite to the edge-shared non-perovskite structure. The Ta- groups are firmly located at the X site of the perovskite structure, leading to an increase in the energy barrier for X-site vacancy generation (from 0.816 eV to 1.217 eV), which slows the phase transition process induced by lattice disorder. Meanwhile, the decrease in crystal grain size after adding CsTa is beneficial for perovskite phase stability due to the decreased surface Gibbs free energy of CsPbI2.84Br0.16 crystals. In addition, the reduced defect density brought about by the improved crystal quality is also favorable for increasing the energy barrier for the phase transition from the perovskite phase to the delta phase. Finally, a champion PCE of 16.59% can be achieved from the HPbI3-prepared PSCs with adding CsTa, which maintain 80.88% of the initial performance after more than 1200 hours in air (RH: similar to 20%). Meanwhile, both 0.1-CsTa and 0.2-CsTa PbI2-prepared PSCs deliver excellent stability and maintain above 80% of the initial PCE after nearly 2000 hours. Impressively, under a relatively high thermal/moisture (temperature: 80 degrees C/RH: similar to 80%) environment, the 0.2-CsTa devices can still retain 87.41% of the initial performance after 500 hours of storage.

Using 4‐Chlorobenzoic Acid Layer Toward Stable and Low‐Cost CsPbI 2 Br Perovskite Solar Cells

Multistrategy Toward Highly Efficient and Stable CsPbI 2 Br Perovskite Solar Cells Based on Dopant‐Free Poly(3‐Hexylthiophene)

High-performance Carbon Electrode-Based CsPbI2Br Inorganic Perovskite Solar Cell Based on Poly(3-Hexylthiophene)-carbon Nanotubes Composite Hole-Transporting Layer.

Low non-radiative recombination loss in CsPbI<inf>2</inf>Br perovskite solar cells

Low non-radiative recombination loss in CsPbI<sub>2</sub>Br perovskite solar cells

Improved Interface Contact for Highly Stable All-Inorganic CsPbI2Br Planar Perovskite Solar Cells

A double perovskite participation for promoting stability and performance of Carbon-Based CsPbI2Br perovskite solar cells

High-performance CsPbI2Br perovskite solar cells based on excess CsBr and ultra thin MgF2 layer

Improvement of Thermal Stability and Photoelectric Performance of Cs2PbI2Cl2/CsPbI2.5Br0.5 Perovskite Solar Cells by Triple-Layer Inorganic Hole Transport Materials

Adjustable Skeleton of Bilateral Lewis Base Passivator for CsPbI 3 Perovskite Solar Cells with PCE over 20% and Superior Stability

Hydrophobic Organic Ammonium Halide Modification toward Highly Efficient and Stable CsPbI 2.25 Br 0.75 Solar Cell

Phase transition induced recrystallization and low surface potential barrier leading to 10.91%-efficient CsPbBr3 perovskite solar cells

Uniform Stepped Interfacial Energy Level Structure Boosts Efficiency and Stability of CsPbI 2 Br Solar Cells

High-Efficiency And Thermal/Moisture Stable Cspbi2.84br0.16 Inorganic Perovskite Solar Cells Enabled By A Multifunctional Cesium Trimethylacetate Organic Additive

Interface Engineering of Low Temperature Processed All-Inorganic CsPbI2Br Perovskite Solar Cells Toward PCE Exceeding 14%

Crystallization Management of CsPbI2Br Perovskites by PbAc2-incorporated Twice Spin-Coating Process for Efficient and Stable CsPbI2Br Perovskite Solar Cells

Polymer Poly (Ethylene Oxide) Additive for High-Stability All-Inorganic CsPbI3−xBrx Perovskite Solar Cells

Secondary Crystallization Strategy for Highly Efficient Inorganic CsPbI2Br Perovskite Solar Cells with Efficiency Approaching 17％

High‐Efficiency Carbon‐Based CsPbIBr 2 Solar Cells with Interfacial Energy Loss Suppressed by a Thin Bulk‐Heterojunction Layer

Hierarchically Manipulated Charge Recombination for Mitigating Energy Loss in CsPbI 2 Br Solar Cells

Surface Management for Carbon‐Based CsPbI 2 Br Perovskite Solar Cell with 14% Power Conversion Efficiency