Lanthanide Stabilized All-Inorganic CsPbI 2 Br Perovskite Solar Cells with Superior Thermal Resistance
Libao Chen,Wen Wu,Jinpei Wang,Zongyao Qian,Ruigang Liu,Yangyang Niu,Yonghua Chen,Xiaoji Xie,Hui Zhang
DOI: https://doi.org/10.1021/acsaem.1c00311
IF: 6.4
2021-03-31
ACS Applied Energy Materials
Abstract:The stability of perovskite solar cells, especially at high temperature (85 °C) conditions, is one of the most critical aspects to advance practical application. All-inorganic perovskites, by substituting the volatile organic compounds with cesium, have exhibited a promising thermal resistance and energy conversion potentials. However, the thermal stability of the all-inorganic perovskite solar cells is strongly related to the phase transition of the perovskite as well as the thermal resistance of each charge transport and collection layer. Herein, we incorporated Eu(Ac)<sub>3</sub> into the perovskite precursor to fabricate photoactive γ-CsPbI<sub>2</sub>Br. The Eu<sup>3+</sup> ions can associate with the negatively charged halide plumbates in the solution and accumulate at the grain boundaries in the as-achieved thin films, effectively reducing the nonradiative recombination centers and stabilizing the γ-CsPbI<sub>2</sub>Br with moderate grain size. A champion efficiency above 12% in an inverted device architecture can be achieved. In the presence of Eu<sup>3+</sup> ions, the phase transition of the γ-CsPbI<sub>2</sub>Br to nonperovskite is significantly mitigated and can be reversibly restored via thermal repairing. Moreover, we thermally treat the electron transport [6,6]-phenyl-C61-butyric acid methyl ester (PC<sub>61</sub>BM) layer prior to the device completion to induce nanomorphology reorientation and replace the reactive Ag electrode by inert Cu to prevent electrode corrosion by diffusive halide ions from the perovskite. As a result, the thermal (at 85 °C, time to 80% of the initial efficiency or <i>t</i><sub>80</sub> ≈ 200 h) and moisture (relative humidity or RH = 40%, <i>t</i><sub>80</sub> > 500 h) stability of the all-inorganic CsPbI<sub>2</sub>Br solar cells can be remarkably enhanced.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00311?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00311</a>.Schematic illustration of the experimental methods, XRD patterns, statistical analyses, UV–vis spectra of the precursor solution, SEM images and energy dispersive spectroscopy (EDS) mapping, photovoltaic parameters, photoluminescence spectra, photoelectron yield spectroscopy characterizations, <i>J</i>–<i>V</i> curves, photo images of the devices, statistical deviation of PCE of the perovskite solar cells with different metal electrodes, illustration of the fabrication of the complete device, and AFM and water contact angle measurements on PCBM (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00311/suppl_file/ae1c00311_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,chemistry, physical,energy & fuels