Abstract:Tin halide perovskite solar cells (PSCs) have attracted great attention in very recent years due to their low toxicity, suitable band gap, and high light absorption coefficient. However, the power conversion efficiency (PCE) and stability of Sn-based PSCs are still much lower than that of their lead-based counterparts. The main reason comes from the Sn2+ ions spontaneously oxidizing into Sn4+ under ambient air conditions. The resulting self-p-type doping of the Sn-based perovskite layer becomes unsuitable and leads to poor photovoltaic performance. Herein, we demonstrate the fabrication of a semiconducting–insulating interface fully covering the formamidinium tin iodide (FASnI3) with a thin layer of poly(methyl methacrylate) (PMMA). The PMMA layer does not only protect FASnI3 from oxygen and moisture but also effectively passivate defect-driven recombination, resulting in improved open-circuit voltage. As a result, devices using a PMMA-FASnI3 layer exhibit a much higher PCE (10.8%) and better stability compared to devices based on pristine FASnI3 (7.7%). Importantly, the PMMA-FASnI3 devices maintain about 80% of their initial efficiency after being stored for 240 h under ambient conditions (25 °C, 60 RH%) without requiring any further encapsulation.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01422?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01422</a>.XRD; current density–voltage curve; PCE histogram; operation stability curve; UV–vis spectrum and dark current curve (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01422/suppl_file/ae0c01422_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Efficient and Stable Mesoporous CsSnI3 Perovskite Solar Cells via Imidazolium‐Based Ionic Liquid Additive

Fully Inorganic CsSnI3 Mesoporous Perovskite Solar Cells with High Efficiency and Stability Via Coadditive Engineering

Achieving efficient and stable inorganic CsSnI3 mesoporous perovskite solar cells via galvanic displacement reaction

Over 12% efficient CsSnI 3 perovskite solar cells enabled by surface post-treatment with bi-functional polar molecules

Localized Electron Density Engineering for Stabilized B-γ CsSnI 3 -Based Perovskite Solar Cells with Efficiencies >10%

A Bifunctional Carbazide Additive For Durable CSSNI3 Perovskite Solar Cells

Stable and Efficient Tin-Based Perovskite Solar Cell via Semiconducting–Insulating Structure

Efficient Environment-friendly Lead-free Tin Perovskite Solar Cells Enabled by Incorporating 4-Fluorobenzylammonium Iodide Additives

Organic‐Free and Lead‐Free Perovskite Solar Cells with Efficiency over 11%

Efficient and Stable FASnI3 Perovskite Solar Cells with Effective Interface Modulation by Low-Dimensional Perovskite Layer.

A single crystal derived precursor for improving the performance of CsSnI3 perovskite solar cells

Efficient Passivation Strategy on Sn Related Defects for High Performance All‐Inorganic CsSnI3 Perovskite Solar Cells

High-efficiency and stable FA 0.75 MA 0.25 SnI 3 perovskite solar cells with large-size crystal grains prepared by doping with multifunctional chloride salt

FA/MA Cation Exchange for Efficient and Reproducible Tin-Based Perovskite Solar Cells.

Trihydrazine Dihydriodide‐Assisted Fabrication of Efficient Formamidinium Tin Iodide Perovskite Solar Cells

Efficient Passivation Strategy on Sn Related Defects for High Performance All‐Inorganic CsSnI 3 Perovskite Solar Cells

Ionic Liquid-Mediated Intermediate Phase Adduct Constructing for Highly Stable Lead-Free Perovskite Solar Cells

Multi-functional Molecule Advancing the Efficiency of Pure 3D FASnI3 Perovskite Solar Cells Based on Tin Tetraiodide Reduction Method

Superior SnO2 Electron Transport Layer Via Bifunctional Interfacial Regulation Using Cesium Sulfate for Efficient Perovskite Solar Cell

Multifunctional anion-cation modulation engineering for Sn-Pb perovskite solar cells

Surface Defects Passivation with Organic Salt for Highly Stable and Efficient Lead-Free Cs 3 Sb 2 I 9 Perovskite Solar Cells