Defect Passivation of CsPbIBr2 Perovskites for High-Performance Solar Cells with Large Open-Circuit Voltage of 1.28 V

Jiajun Lu,Shan-Ci Chen,Qingdong Zheng

DOI: https://doi.org/10.1021/acsaem.8b01430

IF: 6.4

2018-01-01

ACS Applied Energy Materials

Abstract:As one of the all-inorganic perovskites, cesium lead mixed-halid perovskite (CsPbIBr2) has a bright photovoltaic application prospect owing to its ambient stability, appropriate bandgap, and distinctive color. However, the defect states in grain boundaries and the surface of CsPbIBr2 polycrystalline film lead to nonradiative carrier recombination which subsequently reduces the open-circuit voltage (V-OC) and final power conversion efficiency (PCE) of the corresponding perovskite solar cells (PSCs). In this work, polyethylene glycol (PEG) is used to passivate the defect states of pure CsPbIBr2 film by improving the film morphology and coverage. The best-performance PSC based on PEG-passivated CsPbIBr2 exhibits a V-OC of 1.28 V, a short-circuit current (J(SC)) of 8.80 mA cm(-2), a fill factor (FF) of 0.649, and a PCE of 7.31%. However, the reference best-performance device based on pure CsPbIBr2 shows an inferior PCE of 6.36% with a lower V-OC of 1.10 V, a comparable J(SC) of 8.81 mA cm(-2), and a similar FF of 0.656. The V-OC of 1.28 V is the highest among all CsPbIBr2 PSCs. Furthermore, the PEG-passivated PSC shows improved shelf stability in comparison with the reference device without PEG-passivation. This work provides a facile strategy to fabricate CsPbIBr2 PSCs with enhanced PCE, enlarged V-OC, and improved stability by defect passivation.