Abstract:The blades of rear stages in small size core compressors are reduced to shorter than 20 mm or even less due to overall high pressure ratio. The growing of tip clearance-to-blade height ratio of the rear stages enhance the leakage flow and increase the possibility of a strong clearance sensitivity, thus limiting the compressor efficiency and stability. A new concept of compressor, namely diffuser passage compressor (DP), for small size core compressors was introduced. The design aims at making the compressors robust to tip clearance leakage flow by reducing pressure difference between pressure and suction surfaces. To validate the concept, the second stage of a twostage highly loaded axial compressor was designed with DP rotor according to a diffuser map. The diffuser passage stage has the same inlet condition and loading as the conventional compressor (CNV) stage, of which the work coefficient is around 0.37. The predicted performance and flow field of the DP were compared with the conventional axial compressor in detail. The rig testing was supplemented with the numerical predictions. Results reveal that the throttle characteristic of DP indicates higher pressure rise and the loss reduction in tip clearance is mainly responsible for the performance improvement. For the compressor with DP, the pressure and flow angle are more uniform on exit plane. What's more, the rotor with diffused passage reveals more robust than the conventional rotor at double clearance gap. Furthermore, the experimental data indicate that DP presents higher pressure rise at design and part speeds. At design speed, the stall margin was extended by 7.25%. Moreover, peak adiabatic efficiency of DP is also higher than that of CNV by about 0.7%.

Design and Verification Test of the Primary and Secondary Stage Compression Gap Size of Miniature High Pressure Air Compressor

The Hydraulic System Design of High Pressure Servo-control Pulse Test Bed

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

Design And Test Of A Novel Highly-Loaded Compressor

58812 ANALYSIS OF THE PISTON/CYLINDER PAIR OF AXIAL PISTON PUMP BASED ON VIRTUAL PROTOTYPE(Fluid-Structure Interaction in MBS)

Simulation and Design of the ZW Type Liquefied Petroleum Gas Compressor Crankshaft

Investigation of Flow Behaviour and Heat Rejection for an Air-Cooled Small Multi-Stage Swash-Plate Compressor

Strain Analysis and Non-Destructive Monitoring of the Two-Stage Hydraulic-Driven Piston Compressor for Hydrogen Storage

Experimental Investigation on the Steady-State Performance and Piston Stroke Length Control of A Variable Displacement Wobble Plate Compressor

Deformation Analysis of the Main Components in A Single Screw Compressor

Modeling and Performance Analysis of Rotary Compressor Considering Multi-Body Coupling and Bearing Deformation

Experimental investigation on a two-stage CO2 compressor with high back pressure

Finite Element Simulation of Stress Field and Fatigue Analysis of Piston in Trans-critical CO2 Compressor

Study on the Stress and Deformation of a Diaphragm Compressor Cylinder Head under Extreme Conditions

Mechanical property and sealing performance analysis of the diaphragm compressor cylinder head for the hydrogen refueling station under the mutation impact load

Aerodynamic Analysis of a Highly Loaded 5-Stage Axial Compressor

Study of the Pressure Distribution Between the Piston Rings in Reciprocating Compressors

Three-Dimensional Compressor Blading Design Improvements in Low-Speed Model Testing

Investigation On Heat Exchange And Lubrication Of Rolling Piston Type Rotary Compressor In Air Conditioner

A Performance Study on the Three-Dimensional Stage of a New High-Loaded Helium Compressor

Finite Element Analysis for the High Pressure Rotary Cylinder Block