Abstract:The blades of rear stages in small size core compressors are reduced to shorter than 20 mm or even less due to overall high pressure ratio. The growing of tip clearance-to-blade height ratio of the rear stages enhance the leakage flow and increase the possibility of a strong clearance sensitivity, thus limiting the compressor efficiency and stability. A new concept of compressor, namely diffuser passage compressor (DP), for small size core compressors was introduced. The design aims at making the compressors robust to tip clearance leakage flow by reducing pressure difference between pressure and suction surfaces. To validate the concept, the second stage of a twostage highly loaded axial compressor was designed with DP rotor according to a diffuser map. The diffuser passage stage has the same inlet condition and loading as the conventional compressor (CNV) stage, of which the work coefficient is around 0.37. The predicted performance and flow field of the DP were compared with the conventional axial compressor in detail. The rig testing was supplemented with the numerical predictions. Results reveal that the throttle characteristic of DP indicates higher pressure rise and the loss reduction in tip clearance is mainly responsible for the performance improvement. For the compressor with DP, the pressure and flow angle are more uniform on exit plane. What's more, the rotor with diffused passage reveals more robust than the conventional rotor at double clearance gap. Furthermore, the experimental data indicate that DP presents higher pressure rise at design and part speeds. At design speed, the stall margin was extended by 7.25%. Moreover, peak adiabatic efficiency of DP is also higher than that of CNV by about 0.7%.

Aerodynamic Analysis of a Highly Loaded 5-Stage Axial Compressor

Aerodynamic Design Of A Highly Loaded Supersonic Aspirated Axial Flow Compressor Stage

Development of A Throughflow Method for Aerodynamic Analysis of Highly Loaded Axial Flow Compressors

Aerodynamic Analysis and Three-Dimensional Redesign of a Multi-Stage Axial Flow Compressor

Aerodynamic Redesign of A 5-Stage Axial Compressor by Restagger and Bow

Analysis about Performance and Flow Filed of High Mass Flow Multistage Axial-Compressor

Three-Dimensional Aerodynamic Optimization of a Multi-Stage Axial Compressor

Investigation of Highly Loaded Compressor Aerodynamic Design Adopting Complex 3D Aerodynamic Layout

A High-Loaded Supersonic Axial Compressor Aerodynamic Design Principle

Effect of Casing Suction on Stage Matching and Flow Loss in A High Pressure Axial Compressor

Application of Complex 3D Aerodynamic Layout in Highly Loaded Compressor on Numerical Simulation

Investigation of a Highly Loaded Transonic Centrifugal Compressor Using an Advanced Design Method

Development and application of a throughflow method for high-loaded axial flow compressors

Aerodynamic Design and Analysis of a Low-reaction Axial Compressor Stage

Design And Test Of A Novel Highly-Loaded Compressor

Research on Three-Dimensional Blade Designs in an Ultra-Highly Loaded Low-Speed Axial Compressor Stage: Design and Numerical Investigations

Aerodynamic Design of a Multi-Stage Industrial Axial Compressor

AERODYNAMIC ANALYSIS OF A 7-STAGE AXIAL COMPRESSOR WITH VARIOUS TIP CLEARANCES IN ROTOR

Aerodynamic Design and Optimization of Zero-stage for Three-stage Axial-flow Low-speed Compressor

Design and Performance Prediction of Multi-stage Axial Compressor