Abstract:The aerodynamic stability of an axial compressor stage depends on the rotor and stator. However, due to the specific design requirements, the evolving flow field and the resulting secondary flow structures are different in both components. This study investigates the evolution of dominant secondary flow structures occurring in the rotor and stator of a tip-critical transonic compressor stage at the near-stall condition using unsteady numerical analysis and validates performance characteristics with the experimental data. The investigation reveals that the presence of rotor tip shock creates a large difference in the pressure gradient across the pressure surface and the suction surface, intensifying tip leakage flow and shock-induced boundary layer separation. The higher incidence angle near the hub leading edge creates a local separation and reattachment zone. The radial pressure gradient causes the low momentum flow from this local separation zone to migrate radially upward. This migrated flow interacts with the tip leakage flow and separated blade boundary layer, eventually creating a colossal recirculation zone and subsequent rotor blockage of around 46%. The increasing streamwise adverse pressure gradient pushes the tip shock upstream, and at the onset of the stall, the flow directly separates from the rotor leading edge avoiding the shock formation. The stator flow field is dominated by the asymmetric hub corner separation induced by the streamwise adverse pressure gradient and the tip corner separation caused by the vortex structures convected downstream from the rotor tip region leading to stator blockage of around 48%. Along with the blade passing frequency, four other dominating frequencies (0.06×BPF, 0.12×BPF, 0.44×BPF, and 0.84×BPF) related to the aerodynamic instabilities are observed at the inception of stall.

Analysis of the Flow Mechanism in a Transonic 1.5 Stage of an Axial Compressor

Numerical Simulation on Unsteady Flow Mechanism of a 1.5-Stage Axial Transonic Compressor

NUMERICAL INVESTIGATION OF FLOW FIELD IN A 1.5-STAGE TRANSONIC COMPRESSOR

Surge Process of a High-Speed Axial–Centrifugal Compressor

Flow Computations of Multi-Stages by URANS and Flux Balanced Mixing Models

Investigation of Transonic Flow Features in an Axial Flow Compressor Rotor

Experimental Investigation of the Transonic Shock Oscillation Characteristics in a Heavy-Duty Gas Turbine Compressor Cascade

Numerical investigation of the unsteady tip leakage flow and rotating stall inception in a transonic compressor

Unsteady near-stall flow mechanisms in a transonic compressor rotor at different rotating speeds

Investigation on the Interaction of Tip Leakage Flow/ Shock Wave/ Boundary Layer in a Transonic Compressor Stage

Numerical simulation of unsteady single-stage transonic axial compressor flow

Aerodynamic Analysis of a Highly Loaded 5-Stage Axial Compressor

3-D viscous numerical investigation on the overall aerodynamic performance of a transonic axial-flow compressor stage

An Aerodynamic Design and Numerical Investigation of Transonic Centrifugal Compressor Stage

Evolution of unsteady secondary flow structures near the onset of stall in a tip-critical transonic axial flow compressor stage

Full Annulus Simulation on a Multistage Axial-Centrifugal Combined Compressor

Numerical Investigation of Wall Heating/Cooling Effect on the Transonic Compressor Performance

Numerical Simulation Of A Transonic Centrifugal Compressor Blades Tip Clearance Flow Of Vehicle Turbocharger

Development of A Throughflow Method for Aerodynamic Analysis of Highly Loaded Axial Flow Compressors

Unsteady Loss Analyses of the Flow in Single-Stage Transonic Compressor

Vortex Flows in the Blade Tip Region of a Transonic Centrifugal Compressor