Abstract:Turbomachines are designed and run at specific operational conditions. However, due to some deterministic and stochastic sources of flow variations, especially at the inlet and outlet of turbomachinery blades, the influence of operational condition variations to aerodynamic performance are considerable. The quantification of performance change is one crucial module in robust design of turbomachinery blades. The paper studies the performance impact of stochastic operational condition variations using polynomial chaos. To reduce the computational cost, an adaptive sparse grid technique is employed to construct the adaptive non -intrusive polynomial chaos (NIPC) model. Through statistical evaluations of performance change for a three-dimensional transonic compressor rotor blade, NASA Rotor 67, the response performance of adaptive NIPC is firstly verified by comparing with the direct MCS method and static NIPC. Then the adaptive NIPC is used to statistically evaluate the adiabatic efficiency change of Rotor 67 due to the separate variation of inlet total pressure and outlet back pressure at two operation conditions: near peak efficiency and near stall. It is found that the performance change is nonlinear dependent on the inlet and outlet pressure variations. Besides, the simultaneous effects of inlet and outlet pressure variations to the performance change are investigated. Finally, the statistical results of flow variations along span, on the suction side and blade-to-blade streamsurfaces at different spans are illustrated in detail to demonstrate how the inlet and outlet pressure variations influence the aerodynamic performance change.

Numerical Prediction of Multi-Stage Axial Compressor Performances

Calculation of the Overall Aerodynamic Performance of Multi-Stage Axial-Flow Compressor

A throughflow-based optimization method for multi-stage axial compressor

Performance Prediction of Centrifugal Pump Based on the Method of Numerical Simulation

Quantification Of Performance Uncertainty For A Transonic Compressor Rotor Using An Adaptive Nipc Method

Research on the Flow Path Design Method of Axial Flow Compressor of Gas Turbine

Effect of Relative Positions between Blade and Volute Tongue on Prediction of Performance in Simulation of Centrifugal Pump

Optimized Aerodynamic Design of Multi-blade Rows of an Axial Compressor

Analytic Method for Computing Axial-flow Compressor and Turbine Characteristics

Three-Dimensional Aerodynamic Optimization Of A Multi-Stage Axial Compressor

Investigation on the Performance Prediction of Single-Stage Axial Compressor by Using Different Turbulence Models

Aerodynamic Analysis of a Highly Loaded 5-Stage Axial Compressor

Full Annulus Simulation on a Multistage Axial-Centrifugal Combined Compressor

A Method of Stall and Surge Prediction in Axial Compressors Based on Three-Dimensional Body-Force Model

NUMERICAL INVESTIGATION OF FLOW FIELD IN A 1.5-STAGE TRANSONIC COMPRESSOR

3-D viscous numerical investigation on the overall aerodynamic performance of a transonic axial-flow compressor stage

LES Investigation of Aerodynamics Performance in an Axial Compressor Stage

Several Key Points for Improving Performance Numerical Prediction of Low-pressure Axial Flow Compressor

Design and Internal-flow Field Analysis of New Two-stage Centrifugal Compressor

An 11-Stage Axial Compressor Performance Simulation Considering the Change of Tip Clearance in Different Operating Conditions