Abstract:The aerodynamic design and optimization of modern centrifugal compressors are inseparable from computational fluid dynamics (CFD) tools. In a design environment, CFD simulations are expected to predict compressor performance characteristics with reasonable accuracy. Turbulence models and model simplification can play a significant role in the discrepancy between analysis and reality. To investigate the influence of turbulence models on aerodynamic analysis results of centrifugal compressors, the National Aeronautics and Space Administration's high efficiency centrifugal compressor stage is selected as the test vehicle. Six eddy-viscosity models, namely, Spalart–Allmaras (SA), standard k–epsilon (k−ε), renormalization group k–epsilon (RNG k−ε), Wilcox k–omega (k−ω), shear stress transport (SST), and SST-reattachment modification (SST-RM) are considered. In all numerical analyses, measured surface roughness is included with the aim of improving numerical solution accuracy. Although some discrepancies exist, the compressor performance characteristics predicted by the k−ω model are in satisfactory agreement with the test data over the whole speedline. The k−ε model overpredicts the isentropic efficiency than the other models, while the SST-RM model underestimates the total pressure ratio in the near-stall region. The RNG k−ε model matches high flow characteristics but overestimates the choked mass flow rate. The SST model obtains a similar operating range with the test data but underestimates the compressor's isentropic efficiency and total pressure ratio, while the SA model totally overestimates the compressor characteristics due to the wall function. Furthermore, variations caused by turbulence models are discussed together with the flow field analysis. Finally, to verify the impact of the impeller backplate bleed cavity, an additional simulation is conducted that specifically accounts for this feature.

Investigation on the Performance Prediction of Single-Stage Axial Compressor by Using Different Turbulence Models

Investigation of turbulence models for aerodynamic analysis of a high-pressure-ratio centrifugal compressor

Quantification Of Performance Uncertainty For A Transonic Compressor Rotor Using An Adaptive Nipc Method

Effect of Relative Positions between Blade and Volute Tongue on Prediction of Performance in Simulation of Centrifugal Pump

Performance Sensitivity Analysis and Aerodynamic Optimization of Compressor Cascades by a Turbulence Adjoint Method

Assessment of advanced RANS turbulence models for prediction of complex flows in compressors

Uncertainty Quantification of Spalart–Allmaras Turbulence Model Coefficients for Compressor Stall

Deficiencies in the Spalart–Allmaras Turbulence Model for the Prediction of the Stability Boundary in Highly Loaded Compressors

A Method of Stall and Surge Prediction in Axial Compressors Based on Three-Dimensional Body-Force Model

Numerical simulation of unsteady single-stage transonic axial compressor flow

Influence of turbulence model on performance prediction of mixed-flow pump

Numerical Investigation of Transonic Axial Compressor Rotor Flows Using an Improved Transition-Sensitized Turbulence Model

Numerical Simulation on Unsteady Flow Mechanism of a 1.5-Stage Axial Transonic Compressor

Numerical Prediction of Multi-Stage Axial Compressor Performances

Uncertainty Quantification of Spalart–Allmaras Turbulence Model Coefficients for Simplified Compressor Flow Features

Influence of Turbulence Models on the Numerical Prediction of Flow in an Industrial Gas Turbine Intake System

A Review of Numerical Methodologies for Predicting Rotating Stall and Surge in High-Speed Centrifugal Compressors

NUMERICAL INVESTIGATION OF STATOR CLOCKING EFFECTS ON THE DOWNSTREAM STATOR IN A 1.5-STAGE AXIAL TURBINE

Effects of Different Turbulence Models on Three-Dimensional Unsteady Cavitating Flows in the Centrifugal Pump and Performance Prediction

Evaluation of Surge Prediction Capabilities of Body-Force Model on a High-Speed Multi-Stage Axial-Radial Compressor

Numerical simulation prediction of pressure distribution of guide vanes in a high-head pump turbine