Abstract:In this paper, the deflected circumferential distance of wake related to some aerodynamic and geometrical parameters was studied to determine the optimum clocking position in axial-flow turbomachinery. A predicting method on how to calculate the deflected circumferential distance of the wake was also put forward. To verify this method, a 2-D time-accurate, viscous flow solver had been used to analyze unsteady flow associated with different clocking positions. A 1.5 stage turbine was employed to observe the effects of clocking positions on the machine performance and tend to find out the optimum clocking position. It shows that the error of the optimum clocking position between the simulation result from CFD and the result from the predicting method is only 0.361%. In fact, there are three assumptions implied in the predicting method, and their rationality has been understood and explained one by one through analyzing machine efficiency, instantaneous entropy contours and viscous stress on the surface of the stator suction side. In order to get further confirmation, the method was also used in the case of a 1.5 stage compressor and the error between the predicted position and the maximum efficiency position obtained from flow field simulation is as much as 1.2%. Furthermore, based on numerical simulation of a 2.5 stage turbine, it is found that clocking positions of the first stator row have little effect on the incoming wake and free stream turbulence of the third stator. This conclusion should be helpful and beneficial to the designs of the multistage turbomachinery, in which clocking effect has been fully utilized.

NUMERICAL INVESTIGATION OF STATOR CLOCKING EFFECTS ON THE DOWNSTREAM STATOR IN A 1.5-STAGE AXIAL TURBINE

Influence of Blade Lean Together with Blade Clocking on the Overall Aerodynamic Performance of a Multi-Stage Turbine

Numerical Simulation Of Clocking Effect On Wake Transportation And Interaction In A 1.5-Stage Axial Turbine

Numerical Simulation of Clocking Effect on Blade Unsteady Aerodynamic Force in Axial Turbine

A Numerical Investigation of Stator Clocking on High Pressure Turbine's Performance

Numerical Simulation of Clocking Effect on Turbine Blade Unsteady Force

Interaction and Clocking Effect of Unsteady Flow in a One and a Half Axial-flow Turbine Stage

Numerical Investigation of the Effect of Stator Clocking on Blade Boundary Layer Flow in Compressor

Numerical Investigation on the Unsteady Flowfield of the Turbine Stage under Different Axial Gaps

Numerical simulation of clocking effect on turbine wake transportation process

Numerical Investigation on Unsteady Flowfield of Turbine Stage

Influence of Stator Clocking on the Unsteady 3-Dimensional Flow in a 2-Stage Turbine

Effect of Unsteady Secondary Vortices on Performance of a 1.5-Stage High-Pressure Turbine

Numerical Study of Influence of Rotor Blades' CLOCKING Effect on Aerodynamic Performance of a Multistage Compressor

Influence of Stator Clocking on the Unsteady Three-Dimensional Flow in a Two-Stage Turbine

Experimental Investigation on Some Unsteady Flow Phenomenon in One and a Half Turbine Stage

Numerical Investigation of Compressor Rotor Blade Clocking Effects on Aerodynamic Loading of the Stator Vane

Experimental Study of Stator Clocking Effects in an Axial Compressor

Numerical simulation of stator clocking effect in a low speed compressor

Numerical Investigation about the Effects of Axial Gap on Turbine Clocking Effects

Research on the Optimum Clocking Position in Axial-Flow Turbomachinery