Abstract:Rotor–stator interaction (RSI) is an inherent phenomenon in multi-row turbomachinery. Unsteady reduced-order methods, such as the harmonic balance (HB) method and the space-time gradient (STG) method, have been proposed to capture RSI with fewer computational resources compared to fully unsteady simulation. In this study, the steady mixing-plane method, the HB method, and the STG method are implemented into the open-source external computational fluid laboratory three-dimensional (CFL3D) flow solver to gain the ability to predict turbomachinery flows based on solving Reynolds-averaged Navier–Stokes equations. Additionally, a rotation interpolation approach for adjacent blades is implemented for the unsteady multi-row turbomachinery simulation. For the HB method, the phase-lag periodic conditions and the temporal interpolation approach between two adjacent blade rows are integrated into CFL3D. Then, the steady mixing-plane method, the HB method, the STG method, and the fully unsteady simulation method are conducted on a quasi-three-dimensional radial slice and a three-dimensional geometry of the National Aeronautics and Space Administration Stage-35 compressor. Both the transient and time-averaged flowfield predicted by the reduced-order methods are compared with the unsteady simulations. Results indicate that the STG method and the HB method can accurately simulate the unsteady flow with better predictions of RSI impact. For the HB method, accurate prediction of transient unsteady flow requires a minimum of seven harmonics, whereas the time-averaged flow requires only five harmonics. Additionally, a quantitative assessment of computational speed is conducted, revealing that the HB method with seven harmonics achieved a speed 28 times faster than the fully unsteady simulation.

Investigations of Multi-Stage Turbomachinery Flow Based on Mixing Plane Models and Unsteady Simulations

Flow Computations of Multi-Stages by URANS and Flux Balanced Mixing Models

NUMERICAL INVESTIGATION OF STATOR CLOCKING EFFECTS ON THE DOWNSTREAM STATOR IN A 1.5-STAGE AXIAL TURBINE

Investigation of Three Dimensional Viscous Unsteady Flow and Excitation Force of Turbomachinery Stage

Parallel Rotor/stator Interaction Methods and Steady/unsteady Flow Simulations of Multi-Row Axial Compressors

Development of unsteady reduced-order methods for multi-row turbomachinery flow simulation based on the computational fluids laboratory three-dimensional solver

3-D viscous numerical investigation on the overall aerodynamic performance of a transonic axial-flow compressor stage

Reduced passage-averaged N-S equations of the three-dimensional flowfield in a multi-stage environment

Numerical Investigation of the Unsteady Flow in a Transonic Compressor with Curved Rotors

Interaction of unsteady separated flow over multi-bodies moving relatively in the same flow field

Numerical Investigation of Unsteady Flow and Alternating Stress of a Three-Stage Centrifugal Compressor

Numerical Research on Influence of Rotor-Stator Interactions in Transonic Compressor

Simulation Research of Effects of Turblence Model on the Aerody namic Performance and Flow Field Structure in High-press Ratio Centrifugal Compressor

Numerical Simulation on Unsteady Flow Mechanism of a 1.5-Stage Axial Transonic Compressor

Experimental and computational investigation on flow characteristics of rotating cavities with high inlet pre-swirl axial throughflow

Investigation of Flow Behaviour and Heat Rejection for an Air-Cooled Small Multi-Stage Swash-Plate Compressor

Compressibility Effects On The Two Generations Of Unsteady Flow Types In Axial Flow Compressors

Numerical simulation of unsteady single-stage transonic axial compressor flow

Experimental and Computational Investigation of A Centrifugal Compressor Stage

Numerical Research on Interaction Between Stages of a Multistage Centrifugal Compressor

Exploration on Method of Simulation and Modeling for High-Velocity Steam-Solid Two-Phase Flow in Supernormal Parameters