Abstract:Due to their great efficiency and minimal loss, self-priming jet pumps are frequently employed in a variety of sectors for sustainable development. A short jet self-priming pump's steady and unsteady flow characteristics are investigated numerically in this study using a standard k-ε turbulence model. The precision and dependability of the numerical calculations used in this work are demonstrated by the less than 2% difference between the pump performance data from the numerical calculation and the external characteristics test results for each flow condition. It was found that due to the perpendicularity of the nozzle axis to the impeller axis, the high-flow velocity zone in the nozzle gradually deviates to the side away from the impeller under high-flow conditions. Backflow is generated on the side close to the impeller, where eccentric vortices are created. As time progresses, the asymmetry of the low-pressure zone within the impeller becomes more pronounced under high-flow conditions, and the fluid is unable to form a stable vortex structure at a specific location. This is an important cause of impeller vibration and noise. The nonlinear vibration at the impeller inlet is less periodic, while the increase in flow rate can make the nonlinear vibration generated within the impeller more regular and stable. This reflects the fact that the fluid flow at small flow rates is more likely to be affected by the blade configuration and the shape of the flow channel, which leads to fluid instability and discontinuity. For various flow rates, the main frequency of the pressure pulsation is higher at the impeller intake (W1) than it is in the impeller channel (W2~7). Additionally, the pressure pulsation is more frequent before 10 times the rotational frequency, with no significant regularity. This suggests that the impeller and injector rear chamber dynamic and static interference impacts may have some bearing on the pressure pulsation. The pressure pulsation coefficients (W2~7) in the impeller at different flow rates show an exponentially decreasing trend with the increase of multiples of five in the rotation frequency. The equations for the relationship between CP and 5NF were obtained, respectively: CP-Q1 = 0.07044 × exp(−0.2372NF), CP-Q3 = 0.06776 × exp(−0.2564 NF), CP-Q5 = 0.07005 × exp(−0.2884 NF). The findings of this study contribute to understanding the flow inhomogeneities inside the pump as well as the analysis of the internal pump vibration, enhancing the jet pump's efficiency and lifespan.

Investigations into the unsteady internal flow characteristics for a waterjet propulsion system at different cruising speeds

Numerical Investigations of the Energy Performance and Pressure Fluctuations for a Waterjet Pump in a Non-Uniform Inflow

Mechanism analyses of the unsteady vortical cavitation behaviors for a waterjet pump in a non-uniform inflow

Experimental and numerical investigations into flow features in an intake duct for the waterjet propulsion under mooring conditions

Numerical investigation of cavitation-vortex interaction in a mixed-flow waterjet pump

Design Method of Water Jet Pump Towards High Cavitation Performances

Effects of Non-Uniform Inflow on the Spatial and Temporal Distribution of Impeller Excitation in Axial Flow Pumps in Water Tunnels

Wake flow characteristics and unsteady performance of a pump-jet propulsor under hull condition

Steady and Unsteady Flow Characteristics inside Short Jet Self-Priming Pump

Cavitating flow investigation in low specific speed axial flow waterjet pumps

The comparative transient prediction on hydrodynamic characteristics and flow field properties of pump-jets with accelerating and decelerating ducts

Unsteady Flow Numerical Simulations on Internal Energy Dissipation for a Low-Head Centrifugal Pump at Part-Load Operating Conditions

Numerical Study on the Stall Behavior of a Water Jet Mixed-Flow Pump

Experimental investigation on flow characteristics and instability of submerged high-speed gaseous jets under co-flow

Numerical study on transient hydraulic excitation force characteristics of a water jet mixed-flow pump during rapid startup period

Research on the Internal Flow Difference between Peak and Valley Conditions of Water Jet Propulsion Pump during Working at Hump Region

PARTICLE-IMAGING VELOCIMETRY AND PRESSURE MEASUREMENTS OF THE TURBULENT FLOWS INSIDE THE INTAKE DUCT

Numerical investigation of non-uniform inflow effects on internal and external characteristics of an axial-flow pump

Experimental and computational investigation on flow characteristics of rotating cavities with high inlet pre-swirl axial throughflow

Numerical simulation of vortex instabilities in the wake of a preswirl pumpjet propulsor

Investigation on the Impeller-Diffuser Interaction on the Unstable Flow in a Mixed-Flow Pump Using a Modified Partially Averaged Navier-Stokes Model