Abstract:To explore the internal flow mechanism and improve the performance of a supersonic compressor, an efficient global optimization design method was developed for an axial flow compressor and applied in the optimization design of a prototype supersonic compressor. Based on the multiple circular arc (MCA) blade parameters, the method can be used to parameterize the elementary stage of the blade. The optimized solution is obtained by changing the elementary stage and stacking lines of the blade during the optimization process. It has the advantages of fewer optimization variables, strong physical intuition, and a smooth surface. The optimization results show that a change in the rotor blade shape parameters has a significant effect on the compressor efficiency under design conditions, while a change in the skewed-swept parameters of the stator is the main factor that improves the compressor's performance under near-stall conditions. Further numerical results show that the optimized rotor changes the form of the shock, weakens the degree of shock boundary layer interference, inhibits the radial migration flow of the supersonic rotor, reduces the loss of the rotor blade top, and improves the performance of the compressor under design conditions. The stator's optimization restrains the generation of a concentrated shedding vortex at the root of the blades and greatly improves the stall margin of the compressor. Finally, the total pressure ratio and flow rate are less than 1% of the values based on the prototype operating conditions, the design mass flow of the optimized high-load supersonic compressor is increased by 0.25%, the isentropic efficiency is increased by 1.05%, and the stall margin is enhanced by 3.5%, thus verifying the effectiveness of the optimization method.

Aerodynamic Design and Optimization of Zero-stage for a 13-stage Axial-flow Gas Compressor

A throughflow-based optimization method for multi-stage axial compressor

Aerodynamic Design Optimization Of The Last Stage Of A Multi-Stage Compressor By Using An Adjoint Method

Research on the Flow Path Design Method of Axial Flow Compressor of Gas Turbine

Design Optimization of the Last Stage of a 4.5-Stage Compressor Using a POD-based Hybrid Model

A Performance Study on the Three-Dimensional Stage of a New High-Loaded Helium Compressor

Three-Dimensional Aerodynamic Optimization Of A Multi-Stage Axial Compressor

Aerodynamic Analysis of a Highly Loaded 5-Stage Axial Compressor

Multistage Compressor Design Based on Dimensional Zooming

An Aerodynamic Design and Numerical Investigation of Transonic Centrifugal Compressor Stage

Aerodynamic Analysis and Three-Dimensional Redesign of a Multi-Stage Axial Flow Compressor

Optimized Aerodynamic Design of Multi-blade Rows of an Axial Compressor

Optimization Design of Aspect Ratio and Solidity of a Heavy-Duty Gas Turbine Transonic Compressor Rotor

Aerodynamic Redesign of A 5-Stage Axial Compressor by Restagger and Bow

Study on S2 Flow Path Design and Three-dimensional Numerical Simulation Parameter Calibration in Axial Compressor

Optimal Design and Analysis of a High-Load Supersonic Compressor Based on a Surrogate Model

Investigation of Endwall Treatment and Shock Control in a Five-Stage Axial Compressor

AERODYNAMIC ANALYSIS OF A 7-STAGE AXIAL COMPRESSOR WITH VARIOUS TIP CLEARANCES IN ROTOR

A Novel Airfoil Design Method and its Application to the Optimization Design of a 3-Stage Transonic Compressor

3-D viscous numerical investigation on the overall aerodynamic performance of a transonic axial-flow compressor stage