Abstract:The tetraethyl orthosilicate is introduced into CZTSSe precursor solution as a source of silicon to partially substitute Sn with Si for fabrication of CZTSSe device, giving rise to favorable functions in terms of passivating SnZn defects and optimizing energy level alignment. Consequently, the CZTSSe device with 7% Si substitution acquires a PCE of 13.02% due to the enhancement of Voc. The SnZn defect passivation and heterojunction interface energetics‐modification are crucial for further improvement of open‐circuit voltage (Voc) and efficiency of Cu2ZnSn(S,Se)4 (CZTSSe) solar cells. Herein, a simple but effective cation substitution strategy is reported to promote the performance of CZTSSe devices by simultaneously modifying the absorber and heterojunction interface. This is achieved by introducing the organic silicon salt C8H20O4Si into CZTSSe precursor solution as a source of silicon to partially substitute Sn with Si. Systematic studies reveal that there are two mechanisms synergistically contributing to the increase of efficiency: 1) This strategy can passivate the undesired SnZn defect in CZTSSe absorber more efficiently, leading to at least one order of magnitude lower SnZn defect density and beneficial carrier transport properties; 2) After Si incorporation, the conduction band minimum of the CZTSSe is upshifted, thus enlarging the bandgap, which ultimately optimizes the energy level structure at the CdS/CZTSSe interface and reduces interfacial energy loss by decreasing the carrier transport barrier. Consequently, the CZTSSe device with 7% Si substitution delivers a satisfactory efficiency of 13.02% owing to an increase in Voc. It is hoped the Si substitution strategy reported here can provide inspiration for developing advanced CZTSSe devices with broad application prospects.

A 9% efficiency of flexible Mo-foil-based Cu<sub>2</sub>ZnSn(S, Se)<sub>4</sub> solar cells by improving CdS buffer layer and heterojunction interface*

Toward High Efficient Cu2 ZnSn(Sx ,Se1- x )4 Solar Cells: Break the Limitations of VOC and FF

Antimony incorporated flexible Cu 2 ZnSn(S,Se) 4 solar cell for enhanced mechanical endurance and efficiency

10.24% Efficiency of Flexible Cu2 ZnSn(S,Se)4 Solar Cells by Pre-Evaporation Selenization Technique

Interface optimization and defects suppression via NaF introduction enable efficient flexible Sb 2 Se 3 thin-film solar cells

Heterojunction interface regulation to realize high-performance flexible Kesterite solar cells

Facile Tailor on the Surface of Mo Foil Toward High‐Efficient Flexible CZTSSe Solar Cells

In-doping collaboratively controlling back interface and bulk defects to achieve efficient flexible CZTSSe solar cells

Surprising Efficiency Enhancement of Cu 2 ZnSn(S,Se) 4 Solar Cells with Abnormal Zn/Sn Ratios

CdS(In)/CZTSSe bandgap alignment engineering for performance enhancement of solar cells without ZnO layer

High-efficient Sb 2 Se 3 solar cell using Zn x Cd 1- x S n-type layer

Beyond 10% Efficient CZTSSe Thin-Film Solar Cells Fabricated by a Two-Step CdS Deposition Process

Energy Band Alignment at p-n Heterojunction Interface in CZTSSe Solar Cells with Novel ZnMgO Buffer Layer

Flexible Substrate‐Structured Sb2S3 Solar Cells with Back Interface Selenization

Doping Behavior of Zn in CdS and Its Effect on the Power Conversion Efficiency of the Cu2ZnSn(S, Se)4 Solar Cell

Realizing zinc-doping of CdS buffer layer via partial electrolyte treatment to improve the efficiency of Cu2ZnSnS4 solar cells

Role of zinc tin oxide passivation layer at back electrode interface in improving efficiency of Cu2ZnSn(S,Se)4 solar cells

Realization of 11.5% Efficiency Cu 2 ZnSn(S,Se) 4 Thin‐Film Solar Cells by Manipulating the Phase Structure of Precursor Films

Passivating SnZn Defect and Optimizing Energy Level Alignment via Organic Silicon Salt Incorporation toward Efficient Solution‐Processed CZTSSe Solar Cells

Atomic-Scale Interface Modification Improves the Performance of Cu(In1- xGax)Se2/Zn(O,S) Heterojunction Solar Cells

Efficient and bending durable flexible Cu2ZnSn(S,Se)4 solar cells achieved by Ga doping stress regulation