Abstract:The tetraethyl orthosilicate is introduced into CZTSSe precursor solution as a source of silicon to partially substitute Sn with Si for fabrication of CZTSSe device, giving rise to favorable functions in terms of passivating SnZn defects and optimizing energy level alignment. Consequently, the CZTSSe device with 7% Si substitution acquires a PCE of 13.02% due to the enhancement of Voc. The SnZn defect passivation and heterojunction interface energetics‐modification are crucial for further improvement of open‐circuit voltage (Voc) and efficiency of Cu2ZnSn(S,Se)4 (CZTSSe) solar cells. Herein, a simple but effective cation substitution strategy is reported to promote the performance of CZTSSe devices by simultaneously modifying the absorber and heterojunction interface. This is achieved by introducing the organic silicon salt C8H20O4Si into CZTSSe precursor solution as a source of silicon to partially substitute Sn with Si. Systematic studies reveal that there are two mechanisms synergistically contributing to the increase of efficiency: 1) This strategy can passivate the undesired SnZn defect in CZTSSe absorber more efficiently, leading to at least one order of magnitude lower SnZn defect density and beneficial carrier transport properties; 2) After Si incorporation, the conduction band minimum of the CZTSSe is upshifted, thus enlarging the bandgap, which ultimately optimizes the energy level structure at the CdS/CZTSSe interface and reduces interfacial energy loss by decreasing the carrier transport barrier. Consequently, the CZTSSe device with 7% Si substitution delivers a satisfactory efficiency of 13.02% owing to an increase in Voc. It is hoped the Si substitution strategy reported here can provide inspiration for developing advanced CZTSSe devices with broad application prospects.

Antimony incorporated flexible Cu 2 ZnSn(S,Se) 4 solar cell for enhanced mechanical endurance and efficiency

Interface optimization and defects suppression via NaF introduction enable efficient flexible Sb 2 Se 3 thin-film solar cells

Efficient and bending durable flexible Cu2ZnSn(S,Se)4 solar cells achieved by Ga doping stress regulation

Flexible Substrate‐Structured Sb2S3 Solar Cells with Back Interface Selenization

Optimizing Crystal Orientation and Defect Mitigation in Antimony Selenide Thin-Film Solar Cells through Buffer Layer Energy Band Adjustment

Sb Doping Strategy to Promote Growth and Suppress Defects in Solution-Processed CZTSSe Solar Cells for Improved Optoelectronic Performance

Surprising Efficiency Enhancement of Cu 2 ZnSn(S,Se) 4 Solar Cells with Abnormal Zn/Sn Ratios

Magnetron Sputtered Sb2Se3-based Thin Films Towards High Performance Quasi-Homojunction Thin Film Solar Cells

Synergistic Effect of Ag, Sb Dual‐Cation Substitution on Cu2ZnSn (S, Se)4 High‐Efficiency Solar Cells

10.24% Efficiency of Flexible Cu2 ZnSn(S,Se)4 Solar Cells by Pre-Evaporation Selenization Technique

Hydrazine Hydrate‐Induced Surface Modification of CdS Electron Transport Layer Enables 10.30%‐efficient Sb2(S,Se)3 Planar Solar Cells

Flexible Monolithic 2-Terminal Kesterite Cu2ZnSnSe4 /perovskite Tandem Solar Cells

Toward High Efficient Cu2 ZnSn(Sx ,Se1- x )4 Solar Cells: Break the Limitations of VOC and FF

In-doping collaboratively controlling back interface and bulk defects to achieve efficient flexible CZTSSe solar cells

Fabricating High‐Efficiency Sb2(S,Se)3 Solar Cells by Novel Additive‐Assisted Longitudinal Component Engineering

Pulsed laser deposition of antimony selenosulfide thin film for efficient solar cells

Cu2ZnSn(S, Se)4 solar cell with slight band tailing states achieves 11.83% efficiency by selenizing sputtered Cu–Zn–Sn–S precursor

Heterojunction interface regulation to realize high-performance flexible Kesterite solar cells

Passivating SnZn Defect and Optimizing Energy Level Alignment via Organic Silicon Salt Incorporation toward Efficient Solution‐Processed CZTSSe Solar Cells

Regulating Energy Band Alignment via Alkaline Metal Fluoride Assisted Solution Post‐Treatment Enabling Sb 2 (S,Se) 3 Solar Cells with 10.7% Efficiency

Vertically Aligned One-Dimensional Crystal-Structured Sb 2 Se 3 for High-Efficiency Flexible Solar Cells via Regulating Selenization Kinetics