Aging of LiNi1/3Mn1/3Co1/3O2 as Cathode Material for Li-ion Batteries

Xiaoyu Zhang,Francois Gendron,Alain Mauger,Lu Qi,Christian Julien

DOI: https://doi.org/10.1149/ma2009-02/7/436

2009-01-01

ECS Meeting Abstracts

Abstract:Abstract not Available.

What problem does this paper attempt to address?

Structural and Electrochemical Properties of LiNi1/3Mn1/3Co1/3O2 Cathode Material upon Aging in Humid Atmosphere

Xiaoyu Zhang,Francois Gendron,A. Mauger,Qi Lu,Christian M. Julien

DOI: https://doi.org/10.1149/ma2010-03/1/551

2010-01-01

ECS Meeting Abstracts

Abstract:Abstract not Available.
Cathode Materials of Li_xCo_(0.8)Ni_(0.2)O_2 for Lithium-ion Battery

Yi Zhu

2001-01-01

Journal of Functional Biomaterials

Abstract:Li x Co 0.8 Ni 0.2 O 2, as the cathode materials for lithium-ion battery, were prepared from the precursors, Co 0.8 Ni 0.2 (OH) 2, which were synthesized by the controlled crystallization technology. The experiments of energy diffraction spectroscopy showed that the elements of Co and Ni were distributed uniformly in the active materials. Because the elements of Co and Ni have been distributed uniformly in the M layer of M(OH) 2 during the controlled crystallization process, the long-term calcining process was avoided, when the recomposing process of diffusion happened in the common solid solutions. The microphotographs of SEM indicated the change of microcosmic morphology. The results of XRD proved that the Li x Co 0.8 Ni 0.2 O 2 were single phase with α-NaFeO 2 layered structure, and have no other phases. The crystal lattices of a and c underwent a process from small to big and then to small, and c/a underwent a process from big to small and then to big.
Effects On Wet-Coated 0.5Li2MnO3·0.5LiNi1/3Co1/3Mn1/3O2 Cathode Material for Li-Ion Batteries

Jianling, Li

DOI: https://doi.org/10.1149/ma2013-02/14/1083

2013-01-01

ECS Meeting Abstracts

Abstract:Abstract not Available.
Surface Analysis of the Lithium-Rich Cathode Material Li1.2Mn0.54Co0.13Ni0.13NaxO2 by Advanced Electron Microscopy

Wei HUANG,Chun-Yang WU,Yue-Wu ZENG,Chuan-Hong JIN,Ze ZHANG

DOI: https://doi.org/10.3866/pku.whxb201605164

2016-01-01

Acta Physico-Chimica Sinica

Abstract:In this work, Li1.2Mn0.54Co0.13Ni0.13NaxO2 was prepared via an ion-exchange process combined with a solid-state reaction. Aberration-corrected scanning transmission electron microscopy (STEM), energy dispersive X-ray spectroscopy (EDS), and electron energy loss spectroscopy (EELS) were all used to study the surface structure and chemical distribution of the resulting material. Nickel (Ni) was found to be enriched at the surface in regions perpendicular to the lithium diffusion channels (that is, the (200) surfaces) and also exhibited a tendency to diffuse into the lithium (Li) layers, generating a Fm3m rocksalt phase. In contrast, cobalt (Co) segregated along the transition metal (TM) layers of the (001) and (200) surfaces. The results of aging trials demonstrated that Co-enriched layers lead to surface structure instability, as evidenced by the formation of a large number of antisite defects (Li-TM) and rocksalt phase structures at the (001) surface during aging.
Preparation and Electrochemical Properties of LiNi2/3Co1/6Mn1/6O2 Cathode Material for Lithium-Ion Batteries

Meijie Zhu,Jiangang Li,Zhibei Liu,Li Wang,Yuqiong Kang,Zhaohan Dang,Jiasen Yan,Xiangming He

DOI: https://doi.org/10.3390/ma14071766

IF: 3.4

2021-01-01

Materials

Abstract:The cathode material LiNi2/3Co1/6Mn1/6O2 with excellent electrochemical performance was prepared successfully by a rheological phase method. The materials obtained were characterized by X-ray diffraction, scanning electron microscopy, electrochemical impedance spectroscopy and charge-discharge tests. The results showed that both calcination temperatures and atmosphere are very important factors affecting the structure and electrochemical performance of LiNi2/3Co1/6Mn1/6O2 material. The sample calcinated at 800 °C under O2 atmosphere displayed well-crystallized particle morphology, a highly ordered layered structure with low defects, and excellent electrochemical performance. In the voltage range of 2.8–4.3 V, it delivered capacity of 188.9 mAh g−1 at 0.2 C and 130.4 mAh g−1 at 5 C, respectively. The capacity retention also reached 93.9% after 50 cycles at 0.5 C. All the results suggest that LiNi2/3Co1/6Mn1/6O2 is a promising cathode material for lithium-ion batteries.
Research Progress in Cathode Material Li (ni1/3co1/3mn1/3) O2 for Li-ion Battery

LIU Yong-xin,MA Xiao-hua,QIU Wei-li,BU Yuan,XU Hai-jie,YANG Qing-he

DOI: https://doi.org/10.3969/j.issn.1001-1579.2005.05.029

2005-01-01

Abstract:Research status of cathode material of Li(Ni_(1/3)Co_(1/3)Mn_(1/3))O_2 for Li-ion batteries was summarized.The progress in the material including its structure,synthesis,electrochemical characteristics and thermal stability were introduced in detail and its future development was prospected.
Substantial Doping Engineering in Layered LiNi 0.5+x Co 0.2−x Mn 0.3 O 2 Materials for Lithium-Ion Batteries

Li-Po He,Kun Li,Yao Zhang,Jun Liu

DOI: https://doi.org/10.1149/1945-7111/ac0aa7

IF: 3.9

2021-06-01

Journal of The Electrochemical Society

Abstract:To reduce cost while maintaining the specific capacity of LiNi0.5Co0.2Mn0.3O2 (NCM523) cathode, we systematically explore the effect of Ni substitution for Co on the structure, electrochemical performance, and thermal stability of NCM523, LiNi0.55Co0.15Mn0.3O2 (NCM5.5:1.5:3), and LiNi0.6Co0.1Mn0.3O2 (NCM613) cathodes in this study. These materials were investigated by scanning electron microscopy, particle-size analysis, Rietveld refinement of X-ray diffraction, inductively coupled plasma-atomic emission spectroscopy, X-ray photoelectron spectroscopy, charge-discharge testing, electrochemical impedance spectroscopy, the galvanostatic intermittent titration technique, and differential scanning calorimetry. The results indicate that a decrease in the Co content of NCM523 lead to an increase in the voltage platform and discharge capacity, which contributes to the improvement of the energy density. However, the initial efficiency, cycle performance, rate capability, and low-temperature performance was found to slightly decrease. This behavior can be attributed to the lower Co content yielding higher degrees of Li+/Ni2+ disordering, higher resistance, lower Li+ diffusivity, and higher activation energy (Ea). Moreover, as the Co content decreased, the thermal stability of NCM523 was slightly decreased. Considering both cost and performance, NCM5.5:1.5:3 and NCM613 materials deserve to be considered as the preferred next-generation materials.

electrochemistry,materials science, coatings & films
Electrochemical Properties of LiNi1/3Mn1/3Co1/3O2 Synthesized by Co-precipitation Method

Xiaoyu Zhang,Francois Gendron,Alain Mauger,Lu Qi,Henri Groult,Laurent Perrigaud,Christian M. Julien

DOI: https://doi.org/10.1149/ma2009-02/8/611

2009-01-01

ECS Meeting Abstracts

Abstract:Abstract not Available.
Nanostructured LiNi1/3Co1/3Mn1/3O2as a cathode material for high-power lithium-ion battery

Xinlu Li,xiu juan shi,Zheng-Hong Huang,Feiyu Kang,Wanci Shen

DOI: https://doi.org/10.1002/apj.171

2008-01-01

Asia-Pacific Journal of Chemical Engineering

Abstract:Nanocrystalline LiNi1/3Co1/3Mn1/3O2 was synthesized by a sol-gel method. Thermal history of the gel was analyzed by thermogravimetric (TG) analysis and differential thermal analysis (DTA). Powders X-ray diffraction (XRD) proved the formation of layered alpha-NaFeO2 hexagonal lattice. Scanning electron microscopy (SEM) showed that original particles were of the size range of 200-300 nm. The discharge capacity was 183 mAh/g in the first cycle with 87.5% capacity retention in 30 cycles at C/10 rate in 3.0-4.5 V potential range. (C) 2008 Curtin University of Technology and John Wiley & Sons, Ltd.
Well-ordered spherical LiNi0.8Co0.1Mn0.1O2 cathode material for lithium-ion batteries

Gai Yang,Xianzhong Qin,Bo Wang,Feipeng Cai,Jian Gao

DOI: https://doi.org/10.1557/jmr.2019.307

IF: 2.7

2019-01-01

Journal of Materials Research

Abstract:Abstract
Structural and Electrochemical Properties of LiNi1/3Mn1/3Co1/3O2 Cathode Material Upon Aging in Humid Atmosphere

Xiaoyu Zhang,F. Gendron,A. Mauger,Lu Qi,C. Julien

DOI: https://doi.org/10.1149/ma2010-03/1/551

2010-01-01

Abstract:LiNi1/3Mn1/3Co1/3O2 compound was successfully synthesized by the co-precipitation method. The effect of H2O on LiNi1/3Mn1/3Co1/3O2 in humid atmosphere was investigated by structural, magnetic and electrochemical analysis. The consequence is that immersion of LiNi1/3Mn1/3Co1/3O2 to H2O and exposure of LiNi1/3Mn1/3Co1/3O2 to humid atmosphere led to a rapid attack in the surface layer of the particles. This effect resulted in the chemical attack of LiNi1/3Mn1/3Co1/3O2 but was restricted only to the surface layer of the particles (10 nm thickness). This aging process occurred during the first few minutes, then it saturated. About 8% of Li-ion was lost due to the delithiation at surface layer. After aging, an initial discharge capacity of 139 mAh/g was delivered at 1 C-rate in the cut-off voltage of 3.0-4.3 V. About 95% of its initial capacity was retained after 30 cycles.
1D nanobar-like LiNi0.4Co0.2Mn0.4O2 as a stable cathode material for lithium-ion batteries with superior long-term capacity retention and high rate capability

Zhen Chen,Dongliang Chao,Jilei Liu,Mark Copley,Jianyi Lin,Zexiang Shen,Guk-Tae Kim,Stefano Passerini

DOI: https://doi.org/10.1039/c7ta02888a

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:In this work is reported the successful synthesis of 1D nanobar-like LiNi0.4Co0.2Mn0.4O2 (N-NCM), preferentially exposing the {010} electrochemically active facets.
Investigation on Structure and Electrochemical Properties of Li[Ni1/3Co1/3Mn1/3]O2 for Lithium Ion Batteries

Xiu Juan Shi,Yong Ping Zheng,Fei Yu Kang,Xin Lu Li,Wan Ci Shen

DOI: https://doi.org/10.4028/www.scientific.net/KEM.336-338.455

2007-01-01

Key Engineering Materials

Abstract:Cathode material Li[Ni1/3Co1/3Mn1/3]O-2 for lithium-ion batteries with layered hexagonal structure was successfully synthesized in sol-gel way. The influences of calcination temperature (from 700 degrees to 1000 degrees C) on the structure and electrochemical behaviors of Li[Ni1/3Co1/3Mn1/3]O-2 were extensively investigated. The results of XRD show that all samples are isostructural with alpha-NaFeO2 with a space group R-3m. XPS analysis shows that the oxidation states of Co and Mn were Co3+ and Mn4+ respectively, while Ni exists as Ni2+ and Ni3+. The charge-discharge experiments show that the sample calcined at 850 degrees C delivers 194.8mAh/g in the first cycle at C/5 rate in 2.5-4.3V potential range.
Recycling of the cathode material of LiNi 1/3Co 1/3Mn 1/3O 2 from spent lithium ion batteries-II

Linyan Li,Shengming Xu,Guoyong Huang,Gehua Wang,Changdong Li

2010-01-01

Abstract:null
Rich-Nickel Ternary Layered Oxide LiNi0.8Co0.1Mn0.1O2 Cathode Material

Ze Feng,Dan Sun,Yougen Tang,Haiyan Wang

DOI: https://doi.org/10.7536/pc180714

2019-01-01

Progress in chemistry

Abstract:Nickel-rich ternary layered oxide LiNi0.8Co0.1Mn0.1O2 (NCM811) is considered to be one of the most potential cathode materials in the next generation lithium-ion batteries due to its high reversible capacity, environmentally friendly feature and low cost. However, this kind of cathode material is suffering from the poor thermal stability, phase transition during the charge-discharge process and safety issue, which hinders its further practical application. With the deepening of researches and development of fabrication methods, the electrochemical properties of NCM811 have been significantly improved. In this paper, the recent research progress of nickel-rich layered oxide NCM811 cathode material has been reviewed. We mainly focus on the problems and declined mechanisms, synthesis methods, improvement measures and theoretical calculation simulation studies of NCM811, and also make a brief outlook for the future development of nickel-rich ternary layered oxide NCM811.
Electrochemical performance and structural stability of layered Li–Ni–Co–Mn oxide cathode materials in different voltage ranges

Zhiguo Wang,Huang Luo,Hui Liu,Fangfang Wu,Chun Zhang,Zhixing Wang,Peng Yu

DOI: https://doi.org/10.1016/j.ceramint.2020.11.216

IF: 5.532

2021-03-01

Ceramics International

Abstract:In this study, layered Li–Ni–Co–Mn oxide (LiNi1-x-yCoxMnyO2) cathode materials with different transition metal compositions (LiNi1/3Co1/3Mn1/3O2, LiNi0.5Co0.2Mn0.3O2, and LiNi0.8Co0.1Mn0.1O2) are synthesized by a simple mixing process and solid-state reaction at a high temperature. The samples show a typical hexagonal α–NaFeO2 structure with a single phase and predominantly spherical morphology with a homogeneous particle size distribution. The electrochemical properties of the samples are investigated in different voltage ranges by galvanostatic charge/discharge tests. The results reveal that the capacity increases with increasing the charging cutoff voltage by 0.1 V for all the samples. In addition, the LiNi1/3Co1/3Mn1/3O2, LiNi0.5Co0.2Mn0.3O2 and LiNi0.8Co0.1Mn0.1O2 samples deliver initial discharge capacities of 161.0, 170.8, and 202.3 mAh g−1, respectively, at a 0.1 C rate with the voltage ranging from 3.0 to 4.3 V, which increase by 23.4%, 18.8%, and 8.2%, respectively, with the increase in the charging cutoff voltage from 4.3 to 4.6 V. Furthermore, compared with LiCoO2, the samples exhibit a relatively superior cycling performance with an increase of the charging cutoff voltage. Cyclic voltammetry tests reveal that the redox process at approximately 4.5–4.6 V corresponds to Co3+/Co4+, and that at approximately 3.6–3.8 V corresponds to Ni2+/Ni4+. X-ray diffraction measurements confirm the reversible phase transition and excellent structural stability of the LiNi1-x-yCoxMnyO2 materials against prolonged cycling.

materials science, ceramics
Electrochemical Performance of Al2O3-Coated LiNi1/3Co1/3Mn1/3O2 Cathode Materials for Li-Ion Batteries

Jian Gang Li,Xiang Ming He,Ru Song Zhao,Chun Rong Wan,Shi Chao Zhang

DOI: https://doi.org/10.4028/www.scientific.net/KEM.336-338.459

2007-01-01

Key Engineering Materials

Abstract:Al2O3-coated LiNi1/3Co1/3Mn1/3O2 powders with excellent electrochemical performance have been synthesized. The electrochemical performance of Al2O3-coated LiNi1/3Co1/3Mn1/3O2 electrodes has been studied as function of the level of Al2O3 coating. Coated LiNi1/3Co1/3Mn1/3O2 samples shows higher discharge capacity and better capacity retention than the base one. Among the coated samples, 1.0mol% coated sample exhibits the best electrical performance. It presents an initial discharge capacity of 174.5 mAh g(-1) over 2.5 similar to 4.4V, and 84.7% capacity retention after 30 cycles over 2.5 similar to 4.6V.
Nanostructured LiNi1/3Co1/3Mn1/3O2as a Cathode Material for High-Power Lithium-Ion Battery

Xinlu Li,Xiujuan Shi,Zheng‐Hong Huang,Feiyu Kang,Wanci Shen

DOI: https://doi.org/10.1002/apj.171

2008-01-01

Asia-Pacific Journal of Chemical Engineering

Abstract:Nanocrystalline LiNi 1/3 Co 1/3 Mn 1/3 O 2 was synthesized by a sol–gel method. Thermal history of the gel was analyzed by thermogravimetric (TG) analysis and differential thermal analysis (DTA). Powders X‐ray diffraction (XRD) proved the formation of layered α‐NaFeO 2 hexagonal lattice. Scanning electron microscopy (SEM) showed that original particles were of the size range of 200–300 nm. The discharge capacity was 183 mAh/g in the first cycle with 87.5% capacity retention in 30 cycles at C/10 rate in 3.0–4.5 V potential range. Copyright © 2008 Curtin University of Technology and John Wiley & Sons, Ltd.
Synthesis and electrochemical performance of LiNi_(1/3)Mn_(1/3)Co_(1/3)O_2-zFz cathode materials for lithium ion batteries

WEN Lei,QI lu,XU Guo-xiang,ZHANG Jing-hua

2006-01-01

Abstract:LiNi1/3Mn1/3Co1/3O2 cathode materials were synthesized by using the co-precipitated metal carbonate as precursor.Structural and electrochemical properties were characterized by XRD,SEM,differential chronopotentiometry and galvanostatic cycling,and effect of F-doping on structural and electrochemical properties of LiNi1/3Mn1/3Co1/3O2 was also investigated.SEM results showed that LiNi1/3Mn1/3Co1/3O2 powders are spherical particles.Fluorine doped materials composed of irregular particles.In the voltage range of 2.5-4.4 V,the LiNi1/3Mn1/3Co1/3O2 cathode material has an initial discharge specific capacity of 162 mAh·g-1,and capacity retention rate is 93.2% up to 50 cycles.Appropriate F-doping can dramatically enhance the cycle performance of LiNi1/3Mn1/3Co1/3O2 cathode materials.After 50 charge-discharge cycles,the samples with z = 0.1 F-doing has 98.1% capacity retention rate.
Structure, modification, and commercialization of high nickel ternary material (LiNi0.8Co0.1Mn0.1O2 and LiNi0.8Co0.15Al0.05O2) for lithium ion batteries

Jie Liu,Zhengguang Zou,Shuchao Zhang,Huanhuan Zhang

DOI: https://doi.org/10.1007/s10008-020-04818-5

IF: 2.747

2020-09-18

Journal of Solid State Electrochemistry

Abstract:LiNi0.8Co0.1Mn0.1O2 (NCM811), as one of the most promising cathode materials for lithium ion batteries, has gained a huge market with its obvious advantages of high energy density and low cost. It has become a competitive material among various cathode materials. However, in NCM811, the phenomenon of "cationic mixed discharge" is serious, resulting the cyclic performance performing badly. In addition, the thermal stability of ternary material will also be poor with the increase of nickel when temperature is high. In view of the above-mentioned situation, researchers come up with different methods to modify LiNi0.8Co0.1Mn0.1O2 by doping and coating to reduce mixing effect and improve its electrochemical performance. Here, we sketch out the structure, properties, and existing problems of NCM811 and summarize some cutting-edge modification methods. Finally, the development direction and commercial application of NCM811 cathode materials are prospected to accelerate its commercialization process.

electrochemistry

Aging of LiNi<sub>1/3</sub>Mn<sub>1/3</sub>Co<sub>1/3</sub>O<sub>2</sub> as Cathode Material for Li-ion Batteries

Structural and Electrochemical Properties of LiNi<sub>1/3</sub>Mn<sub>1/3</sub>Co<sub>1/3</sub>O<sub>2</sub> Cathode Material upon Aging in Humid Atmosphere

Cathode Materials of Li_xCo_(0.8)Ni_(0.2)O_2 for Lithium-ion Battery

Effects On Wet-Coated 0.5Li<sub>2</sub>MnO<sub>3</sub>·0.5LiNi<sub>1/3</sub>Co<sub>1/3</sub>Mn<sub>1/3</sub>O<sub>2</sub> Cathode Material for Li-Ion Batteries

Surface Analysis of the Lithium-Rich Cathode Material Li<sub>1.2</sub>Mn<sub>0.54</sub>Co<sub>0.13</sub>Ni<sub>0.13</sub>Na<sub><i>x</i></sub>O<sub>2</sub> by Advanced Electron Microscopy

Preparation and Electrochemical Properties of LiNi<sub>2/3</sub>Co<sub>1/6</sub>Mn<sub>1/6</sub>O<sub>2</sub> Cathode Material for Lithium-Ion Batteries

Research Progress in Cathode Material Li (ni1/3co1/3mn1/3) O2 for Li-ion Battery

Substantial Doping Engineering in Layered LiNi 0.5+x Co 0.2−x Mn 0.3 O 2 Materials for Lithium-Ion Batteries

Electrochemical Properties of LiNi<sub>1/3</sub>Mn<sub>1/3</sub>Co<sub>1/3</sub>O<sub>2</sub> Synthesized by Co-precipitation Method

Nanostructured LiNi<sub>1/3</sub>Co<sub>1/3</sub>Mn<sub>1/3</sub>O<sub>2</sub>as a cathode material for high-power lithium-ion battery

Well-ordered spherical LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> cathode material for lithium-ion batteries

Structural and Electrochemical Properties of LiNi1/3Mn1/3Co1/3O2 Cathode Material Upon Aging in Humid Atmosphere

1D nanobar-like LiNi<sub>0.4</sub>Co<sub>0.2</sub>Mn<sub>0.4</sub>O<sub>2</sub> as a stable cathode material for lithium-ion batteries with superior long-term capacity retention and high rate capability

Investigation on Structure and Electrochemical Properties of Li[Ni<sub>1/3</sub>Co<sub>1/3</sub>Mn<sub>1/3</sub>]O<sub>2</sub> for Lithium Ion Batteries

Recycling of the cathode material of LiNi 1/3Co 1/3Mn 1/3O 2 from spent lithium ion batteries-II

Rich-Nickel Ternary Layered Oxide LiNi0.8Co0.1Mn0.1O2 Cathode Material

Electrochemical performance and structural stability of layered Li–Ni–Co–Mn oxide cathode materials in different voltage ranges

Electrochemical Performance of Al<sub>2</sub>O<sub>3</sub>-Coated LiNi<sub>1/3</sub>Co<sub>1/3</sub>Mn<sub>1/3</sub>O<sub>2</sub> Cathode Materials for Li-Ion Batteries

Nanostructured LiNi1/3Co1/3Mn1/3O2as a Cathode Material for High-Power Lithium-Ion Battery

Synthesis and electrochemical performance of LiNi_(1/3)Mn_(1/3)Co_(1/3)O_2-zFz cathode materials for lithium ion batteries

Structure, modification, and commercialization of high nickel ternary material (LiNi0.8Co0.1Mn0.1O2 and LiNi0.8Co0.15Al0.05O2) for lithium ion batteries