Abstract:The extrinsic cathode interface between the sulfide electrolyte and the Li2S electrode is always ignored in all-solid-state lithium–sulfur batteries. However, the aggregation of the Li2S cathode is still observed during cycling. The gradually lost extrinsic contact interface between the cathode and the electrolyte would result in considerable interface resistance and severe capacity decay in the cell due to the lack of efficient electron and ionic conduction at the interface. Herein, a facile dual-doping strategy demonstrates the synthesis of a functional inorganic electrolyte. The obtained Li7P2.9Ce0.2S10.9Cl0.3 glass–ceramic electrolyte shows a higher-lithium-ionic conductivity of 3.2 mS cm–1 at room temperature. Further, UV–vis absorption and ex situ scanning electron microscopy studies confirm robust interfacial adhesion between the functional inorganic electrolyte, Li7P2.9Ce0.2S10.9Cl0.3, and the Li2S cathode. Thus, a stable extrinsic cathode interface is unprecedently built. Finally, the all-solid-state lithium–sulfur battery based on the Li7P2.9Ce0.2S10.9Cl0.3 electrolyte delivers a higher reversible initial capacity of 617 mA h g–1, a lower interface resistance of 25 Ω cm2 and much better cycling stability (with a high capacity retention of 89% after 100 cycles) than the pristine Li7P3S11 electrolyte.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c06328?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c06328</a>.XPS spectra of the Li7P3S11, Li7P2.9Ce0.2S11.1, and Li7P2.9Ce0.2S10.9Cl0.3 glass–ceramic samples; TOF-SIMS spectra of the Li7P3S11 glass–ceramic sample; morphology and microstructure of Li7P3S11 glass–ceramic; morphology and microstructure of Li7P2.9Ce0.2S10.9Cl0.3 glass–ceramic; electrochemical stability window between 2 and 5 V for the Li7P2.9Ce0.2S10.9Cl0.3 glass–ceramic electrolyte; schematic diagram of the all-solid-state Li–S battery based on the Li2S composite cathode; Li2S solution, Li7P3S11 glass–ceramic sample in Li2S solution, and Li7P2.9Ce0.2S10.9Cl0.3 glass–ceramic sample in Li2S solution before static adsorption (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c06328/suppl_file/am1c06328_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Tailored Li<sub>2</sub>S–P<sub>2</sub>S<sub>5</sub>glass-ceramic electrolyte by MoS<sub>2</sub>doping, possessing high ionic conductivity for all-solid-state lithium-sulfur batteries

Tailored Li2S–P2S5glass-ceramic Electrolyte by MoS2doping, Possessing High Ionic Conductivity for All-Solid-state Lithium-Sulfur Batteries

A highly stable and conductive cerium‐doped Li7P3S11 glass‐ceramic electrolyte for solid‐state lithium–sulfur batteries

Conformal Conversion of Polyphosphazene@Sb2MoO6 Nanowires to N/S-Doped/Carbon-Coated SbPO4/MoOx for High-performance Lithium Storage

Enhanced air-stability and high Li-ion conductivity of Li6.988P2.994Nb0.2S10.934O0.6 glass-ceramic electrolyte for All-Solid-state Lithium-Sulfur Batteries.

Improved Ionic Conductivity and Air Stability of Li7P3S11 by SnSe2 Doping and Two-Step Pressing Sintering Method

Enhanced Ionic Conductivity and Air Stability of Bi2se3-Doped 80Li2s-20P2s5 Solid-State Electrolytes

Rational Coating of Li7P3S11 Solid Electrolyte on MoS2 Electrode for All-Solid-state Lithium Ion Batteries

Ultrafast Synthesis of I‐Rich Lithium Argyrodite Glass–Ceramic Electrolyte with High Ionic Conductivity

Synergistic Effect of Processing and Composition X on Conductivity of Xli2s-(100 − X)p2s5 Electrolytes

All-solid-state batteries with Li2O-Li2S-P2S5 glass electrolytes synthesized by two-step mechanical milling

Improving the Stability of 75Li2S·25P2S5 Glass-Ceramic Electrolytes Against Lithium Metals Through Li2O Doping

Tailored Li 7 P 3 S 11 Electrolyte by In 2 S 3 Doping Suppresses Electrochemical Decomposition for High-Performance All-Solid-State Lithium–Sulfur Batteries

Preparation of Li7P3S11 Glass-Ceramic Electrolyte by Dissolution-Evaporation Method for All-Solid-state Lithium Ion Batteries

Preparation and degradation of high air stability sulfide solid electrolyte 75Li2S·25P2S5 glass-ceramic

Strong Interfacial Adhesion between the Li 2 S Cathode and a Functional Li 7 P 2.9 Ce 0.2 S 10.9 Cl 0.3 Solid-State Electrolyte Endowed Long-Term Cycle Stability to All-Solid-State Lithium–Sulfur Batteries

Improved Ionic Conductivity And Li Dendrite Suppression Capability Toward Li7p3s11-Based Solid Electrolytes Triggered By Nb And O Cosubstitution

High Capacity, Superior Cyclic Performances in All-Solid-State Lithium-Ion Batteries Based on 78Li2s-22P2s5 Glass-Ceramic Electrolytes Prepared Via Simple Heat Treatment

Composite Solid Electrolyte with Continuous and Fast Organic-Inorganic Ion Transport Highways Created by 3D Crimped Nanofibers@functional Ceramic Nanowires

Unveiling the Growth Mechanism of the Interphase between Lithium Metal and Li2S‐P2S5‐B2S3 Solid‐State Electrolytes

Improved Ionic Conductivity and Li Dendrite Suppression Capability toward Li 7 P 3 S 11 -Based Solid Electrolytes Triggered by Nb and O Cosubstitution