Abstract:Organic liquid compound electrolytes are widely applied in conventional lithium-ion batteries. However, their disadvantages of unsafety and complexity of battery fabrication can hardly be avoided [1]. All-solid-state batteries without using liquid electrolytes provide an effective way to overcome these problems and studies on this field are increasing [2]. Solid electrolyte material is the critical factor to affect the electrochemical and cycle performances of all-solid-state batteries. For commercial application of all-solid-state batteries, high ionic conductivity and cyclability at room temperature are indispensable. Metal sulfides are in great potential to meet the practical application as solid electrolytes and a series of solid sulfur compounds with high ionic conductivities have been reported [3,4]. In this work, a new material Li17Ge2P3S20 with new crystal structure has been synthesized via a simple solid state reaction. The new structure is detected using XRD patterns as shown in Figure 1. AC impedance has been performed and the ionic conductivity of Li17Ge2P3S20 is determined to be 8.07×10-3 S/cm at room temperature. Experimental parameters have been optimized and elemental doping has been utilized to enhance the conductivity and stability of this material as solid electrolyte for all-solid-state lithium ion batteries. Acknowledgement This work was financially supported by the Shenzhen Peacock Plan (KQCX20140522150815065)，the Natural Science Foundation of Shenzhen ( JCYJ20150331101823677) and the Science and Technology Innovation Foundation for the Undergraduates of SUSTC(2015x19 and 2015x12) References: [1] Etacheri V, Marom R, Elazari R, et al. Challenges in the development of advanced Li-ion batteries: a review[J]. Energy & Environmental Science, 2011, 4(9): 3243-3262. [2] Notten P H L, Roozeboom F, Niessen R A H, et al. 3‐D integrated all‐solid‐state rechargeable batteries[J]. Advanced Materials, 2007, 19(24): 4564-4567. [3] Kamaya N, Homma K, Yamakawa Y, et al. A lithium superionic conductor[J]. Nature materials, 2011, 10(9): 682-686. [4] Kato Y, Hori S, Saito T, et al. High-power all-solid-state batteries using sulfide superionic conductors[J]. Nature Energy, 2016, 1: 16030. Figure 1

Improved Ionic Conductivity and Li Dendrite Suppression Capability toward Li 7 P 3 S 11 -Based Solid Electrolytes Triggered by Nb and O Cosubstitution

Improved Ionic Conductivity And Li Dendrite Suppression Capability Toward Li7p3s11-Based Solid Electrolytes Triggered By Nb And O Cosubstitution

(Invited) Sulfide-Based Solid Electrolytes for Solid State Batteries

Enhanced air-stability and high Li-ion conductivity of Li6.988P2.994Nb0.2S10.934O0.6 glass-ceramic electrolyte for All-Solid-state Lithium-Sulfur Batteries.

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Enhanced Air and Electrochemical Stability of Li 7 P 3 S 11 –Based Solid Electrolytes Enabled by Aliovalent Substitution of SnO 2

Design Unique Air‐Stable and Li–Metal Compatible Sulfide Electrolyte via Exploration of Anion Functional Units for All‐Solid‐State Lithium–Metal Batteries

Enhanced Air and Electrochemical Stability of Li7P3S11–Based Solid Electrolytes Enabled by Aliovalent Substitution of SnO2

Tailored Li 7 P 3 S 11 Electrolyte by In 2 S 3 Doping Suppresses Electrochemical Decomposition for High-Performance All-Solid-State Lithium–Sulfur Batteries

Nb 2 CT X MXene Boosting PEO Polymer Electrolyte for All-Solid-state Li-S Batteries: Two Birds with One Stone Strategy to Enhance Li + Conductivity and Polysulfide Adsorptivity

Improved Ionic Conductivity and Air Stability of Li7P3S11 by SnSe2 Doping and Two-Step Pressing Sintering Method

Sb and O Dual Doping of Chlorine-rich Lithium Argyrodite to Improve Air Stability and Lithium Compatibility for All-Solid-state Batteries

All-in-one improvement toward Li6PS5Br-Based solid electrolytes triggered by compositional tune

In situ modified sulfide solid electrolyte enabling stable lithium metal batteries

Engineering high conductive Li7P2S8I via Cl- doping for all-solid-state Li-S batteries workable at different operating temperatures

Tailored Li2s-P2s5 Glass-Ceramic Electrolyte By Mos2 Doping, Possessing High Ionic Conductivity For All-Solid-State Lithium-Sulfur Batteries

Bulk and interface-strengthened Li7P2.9Sb0.1S10.65O0.15I0.2 electrolyte via dual-source doping for all-solid-state lithium-sulfur batteries

Enhanced ionic conductivity of sulfide-based solid electrolyte by incorporating lanthanum sulfide

A Novel Solid Electrolyte Material (li17ge2p3s20) with High Ionic Conductivity

Nb2CTx MXene boosting PEO polymer electrolyte for all-solid-state Li-S batteries: two birds with one stone strategy to enhance Li+ conductivity and polysulfide adsorptivity

Improvement of stability and solid-state battery performances of annealed 70Li2S–30P2S5 electrolytes by additives