Abstract:The extrinsic cathode interface between the sulfide electrolyte and the Li2S electrode is always ignored in all-solid-state lithium–sulfur batteries. However, the aggregation of the Li2S cathode is still observed during cycling. The gradually lost extrinsic contact interface between the cathode and the electrolyte would result in considerable interface resistance and severe capacity decay in the cell due to the lack of efficient electron and ionic conduction at the interface. Herein, a facile dual-doping strategy demonstrates the synthesis of a functional inorganic electrolyte. The obtained Li7P2.9Ce0.2S10.9Cl0.3 glass–ceramic electrolyte shows a higher-lithium-ionic conductivity of 3.2 mS cm–1 at room temperature. Further, UV–vis absorption and ex situ scanning electron microscopy studies confirm robust interfacial adhesion between the functional inorganic electrolyte, Li7P2.9Ce0.2S10.9Cl0.3, and the Li2S cathode. Thus, a stable extrinsic cathode interface is unprecedently built. Finally, the all-solid-state lithium–sulfur battery based on the Li7P2.9Ce0.2S10.9Cl0.3 electrolyte delivers a higher reversible initial capacity of 617 mA h g–1, a lower interface resistance of 25 Ω cm2 and much better cycling stability (with a high capacity retention of 89% after 100 cycles) than the pristine Li7P3S11 electrolyte.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c06328?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c06328</a>.XPS spectra of the Li7P3S11, Li7P2.9Ce0.2S11.1, and Li7P2.9Ce0.2S10.9Cl0.3 glass–ceramic samples; TOF-SIMS spectra of the Li7P3S11 glass–ceramic sample; morphology and microstructure of Li7P3S11 glass–ceramic; morphology and microstructure of Li7P2.9Ce0.2S10.9Cl0.3 glass–ceramic; electrochemical stability window between 2 and 5 V for the Li7P2.9Ce0.2S10.9Cl0.3 glass–ceramic electrolyte; schematic diagram of the all-solid-state Li–S battery based on the Li2S composite cathode; Li2S solution, Li7P3S11 glass–ceramic sample in Li2S solution, and Li7P2.9Ce0.2S10.9Cl0.3 glass–ceramic sample in Li2S solution before static adsorption (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c06328/suppl_file/am1c06328_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enhanced air-stability and high Li-ion conductivity of Li6.988P2.994Nb0.2S10.934O0.6 glass-ceramic electrolyte for All-Solid-state Lithium-Sulfur Batteries.

Ionic Liquid Reinforced NaSICON-type Oxide Electrolyte Films Enabling Solid State Conversion Metal Fluoride-Lithium Batteries

Improved Ionic Conductivity and Li Dendrite Suppression Capability toward Li 7 P 3 S 11 -Based Solid Electrolytes Triggered by Nb and O Cosubstitution

Improved Ionic Conductivity And Li Dendrite Suppression Capability Toward Li7p3s11-Based Solid Electrolytes Triggered By Nb And O Cosubstitution

Design Unique Air‐Stable and Li–Metal Compatible Sulfide Electrolyte via Exploration of Anion Functional Units for All‐Solid‐State Lithium–Metal Batteries

(Invited) Sulfide-Based Solid Electrolytes for Solid State Batteries

Tailored Li2S–P2S5glass-ceramic Electrolyte by MoS2doping, Possessing High Ionic Conductivity for All-Solid-state Lithium-Sulfur Batteries

Improved Ionic Conductivity and Air Stability of Li7P3S11 by SnSe2 Doping and Two-Step Pressing Sintering Method

All-solid-state batteries with Li2O-Li2S-P2S5 glass electrolytes synthesized by two-step mechanical milling

Achieving high-performance Li6.5Sb0.5Ge0.5S5I-based all-solid-state lithium batteries

A High Air‐Stability and Li‐Metal‐Compatible Li3+2xP1−xBixS4−1.5xO1.5x Sulfide Electrolyte for All‐Solid‐State Li–Metal Batteries

Nb 2 CT X MXene Boosting PEO Polymer Electrolyte for All-Solid-state Li-S Batteries: Two Birds with One Stone Strategy to Enhance Li + Conductivity and Polysulfide Adsorptivity

Enhanced Air and Electrochemical Stability of Li 7 P 3 S 11 –Based Solid Electrolytes Enabled by Aliovalent Substitution of SnO 2

High Capacity, Superior Cyclic Performances in All-Solid-State Lithium-Ion Batteries Based on 78Li2s-22P2s5 Glass-Ceramic Electrolytes Prepared Via Simple Heat Treatment

All-in-one improvement toward Li6PS5Br-Based solid electrolytes triggered by compositional tune

Insight on air-induced degradation mechanism of Li7P3S11 to design a chemical-stable solid electrolyte with high Li2S utilization in all-solid-state Li/S batteries

Improving the Stability of 75Li2S·25P2S5 Glass-Ceramic Electrolytes Against Lithium Metals Through Li2O Doping

Strong Interfacial Adhesion between the Li 2 S Cathode and a Functional Li 7 P 2.9 Ce 0.2 S 10.9 Cl 0.3 Solid-State Electrolyte Endowed Long-Term Cycle Stability to All-Solid-State Lithium–Sulfur Batteries

Tailored Li 7 P 3 S 11 Electrolyte by In 2 S 3 Doping Suppresses Electrochemical Decomposition for High-Performance All-Solid-State Lithium–Sulfur Batteries

Bulk and interface-strengthened Li7P2.9Sb0.1S10.65O0.15I0.2 electrolyte via dual-source doping for all-solid-state lithium-sulfur batteries

Preparation of Metal-Oxide-Doped Li7P2S8Br0.25I0.75 Solid Electrolytes for All-Solid-State Lithium Batteries