Abstract:The development of novel sulfide solid-state electrolytes with high conductivity, excellent air-stability, and stable electrodes-electrolyte interface defied the commercialization of all-solid-state cells. Currently, it has not been developed an ideal solid electrolyte which can integrate the solid-state batteries. Herein, Nb and O co-doping strategy is excogitated to improve the chemical and electrochemical performance of sulfide electrolytes. The interactive effect of Nb and O in the novel Li6.988P2.994Nb0.2S10.934O0.6 glass-ceramic electrolyte results in superior Li+ conductivity of 2.82 mS cm-1, remarkably air-stability and electrochemical stability against Li metal compared to Li7P3S11 counterpart at 25 ⁰C. Solid-state 31P MAS-NMR investigated that doping of LiNbO3 (0≤x≤1) not only enhance the degree of crystallization but also produce P2OS64- units with bridging oxygen atom in Li6.988P2.994Nb0.2S10.934O0.6 glass-ceramic electrolyte and hence boost up the conductive deportment of glass-ceramics. Impressively, the developed electrolyte exhibits a stable full voltage window up to 5 V vs. Li/Li+. Furthermore, electrochemical impedance spectroscopy (EIS) analysis determines that the interface resistance of Li2S/Li6.988P2.994Nb0.2S10.934O0.6/Li-In cell is lower than the cell with Li7P3S11 electrolyte. Besides, the battery of Li6.988P2.994Nb0.2S10.934O0.6 electrolyte delivers an initial discharge capacity of 472.7 mAh g-1, and 530.9 mAh g-1 after 50 cycles with 98.88% capacity retention from the 2nd cycle. The coulombic efficiency of the cell persists about ~100% after 50 cycles. Thus the proposed co-doped strategy produced a sulfide electrolyte address the challenging issues of chemical/electrochemical stabilities and showed promising industrial prospects for next-generation all-solid-state batteries.

Tailored Li2S–P2S5glass-ceramic Electrolyte by MoS2doping, Possessing High Ionic Conductivity for All-Solid-state Lithium-Sulfur Batteries

Tailored Li<sub>2</sub>S–P<sub>2</sub>S<sub>5</sub>glass-ceramic electrolyte by MoS<sub>2</sub>doping, possessing high ionic conductivity for all-solid-state lithium-sulfur batteries

Enhanced air-stability and high Li-ion conductivity of Li6.988P2.994Nb0.2S10.934O0.6 glass-ceramic electrolyte for All-Solid-state Lithium-Sulfur Batteries.

All-solid-state batteries with Li2O-Li2S-P2S5 glass electrolytes synthesized by two-step mechanical milling

Improved Ionic Conductivity and Air Stability of Li7P3S11 by SnSe2 Doping and Two-Step Pressing Sintering Method

Micro-Sized MoS6@15%Li7P3S11 Composite Enables Stable All-Solid-State Battery with High Capacity

Rational Coating of Li7P3S11 Solid Electrolyte on MoS2 Electrode for All-Solid-state Lithium Ion Batteries

Tailored Li 7 P 3 S 11 Electrolyte by In 2 S 3 Doping Suppresses Electrochemical Decomposition for High-Performance All-Solid-State Lithium–Sulfur Batteries

Bulk and interface-strengthened Li7P2.9Sb0.1S10.65O0.15I0.2 electrolyte via dual-source doping for all-solid-state lithium-sulfur batteries

High Capacity, Superior Cyclic Performances in All-Solid-State Lithium-Ion Batteries Based on 78Li2s-22P2s5 Glass-Ceramic Electrolytes Prepared Via Simple Heat Treatment

Improved Ionic Conductivity and Li Dendrite Suppression Capability toward Li 7 P 3 S 11 -Based Solid Electrolytes Triggered by Nb and O Cosubstitution

Enhanced Ionic Conductivity and Air Stability of Bi2se3-Doped 80Li2s-20P2s5 Solid-State Electrolytes

Improved Ionic Conductivity And Li Dendrite Suppression Capability Toward Li7p3s11-Based Solid Electrolytes Triggered By Nb And O Cosubstitution

Improving the Stability of 75Li2S·25P2S5 Glass-Ceramic Electrolytes Against Lithium Metals Through Li2O Doping

Insight on air-induced degradation mechanism of Li7P3S11 to design a chemical-stable solid electrolyte with high Li2S utilization in all-solid-state Li/S batteries

A highly stable and conductive cerium‐doped Li7P3S11 glass‐ceramic electrolyte for solid‐state lithium–sulfur batteries

Engineering high conductive Li7P2S8I via Cl- doping for all-solid-state Li-S batteries workable at different operating temperatures

All-solid-state lithium–sulfur batteries based on a newly designed Li7P2.9Mn0.1S10.7I0.3 superionic conductor

A High Air‐Stability and Li‐Metal‐Compatible Li3+2xP1−xBixS4−1.5xO1.5x Sulfide Electrolyte for All‐Solid‐State Li–Metal Batteries

Achieving high-performance Li6.5Sb0.5Ge0.5S5I-based all-solid-state lithium batteries

Li-Ion Cooperative Migration and Oxy-Sulfide Synergistic Effect in Li14 P2 Ge2 S16-6 x Ox Solid-State-Electrolyte Enables Extraordinary Conductivity and High Stability