Abstract:The extrinsic cathode interface between the sulfide electrolyte and the Li2S electrode is always ignored in all-solid-state lithium–sulfur batteries. However, the aggregation of the Li2S cathode is still observed during cycling. The gradually lost extrinsic contact interface between the cathode and the electrolyte would result in considerable interface resistance and severe capacity decay in the cell due to the lack of efficient electron and ionic conduction at the interface. Herein, a facile dual-doping strategy demonstrates the synthesis of a functional inorganic electrolyte. The obtained Li7P2.9Ce0.2S10.9Cl0.3 glass–ceramic electrolyte shows a higher-lithium-ionic conductivity of 3.2 mS cm–1 at room temperature. Further, UV–vis absorption and ex situ scanning electron microscopy studies confirm robust interfacial adhesion between the functional inorganic electrolyte, Li7P2.9Ce0.2S10.9Cl0.3, and the Li2S cathode. Thus, a stable extrinsic cathode interface is unprecedently built. Finally, the all-solid-state lithium–sulfur battery based on the Li7P2.9Ce0.2S10.9Cl0.3 electrolyte delivers a higher reversible initial capacity of 617 mA h g–1, a lower interface resistance of 25 Ω cm2 and much better cycling stability (with a high capacity retention of 89% after 100 cycles) than the pristine Li7P3S11 electrolyte.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c06328?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c06328</a>.XPS spectra of the Li7P3S11, Li7P2.9Ce0.2S11.1, and Li7P2.9Ce0.2S10.9Cl0.3 glass–ceramic samples; TOF-SIMS spectra of the Li7P3S11 glass–ceramic sample; morphology and microstructure of Li7P3S11 glass–ceramic; morphology and microstructure of Li7P2.9Ce0.2S10.9Cl0.3 glass–ceramic; electrochemical stability window between 2 and 5 V for the Li7P2.9Ce0.2S10.9Cl0.3 glass–ceramic electrolyte; schematic diagram of the all-solid-state Li–S battery based on the Li2S composite cathode; Li2S solution, Li7P3S11 glass–ceramic sample in Li2S solution, and Li7P2.9Ce0.2S10.9Cl0.3 glass–ceramic sample in Li2S solution before static adsorption (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c06328/suppl_file/am1c06328_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Ultrafast Synthesis of I‐Rich Lithium Argyrodite Glass–Ceramic Electrolyte with High Ionic Conductivity

Iodine-rich lithium argyrodite with enhanced ionic conductivity for solid-state batteries

Silicon-Doped Argyrodite Solid Electrolyte Li 6 PS 5 I with Improved Ionic Conductivity and Interfacial Compatibility for High-Performance All-Solid-State Lithium Batteries

Anomalous High Ionic Conductivity of Nanoporous Β-Li3ps4

Silicon-Doped Argyrodite Solid Electrolyte Li6PS5I with Improved Ionic Conductivity and Interfacial Compatibility for High-Performance All-Solid-State Lithium Batteries.

Superionic Lithium Argyrodite Electrolytes by Bromine-Doping for All-Solid-State Lithium Batteries

A Versatile Li<sub>6.5</sub>In<sub>0.25</sub>P<sub>0.75</sub>S<sub>5</sub>I Sulfide Electrolyte Triggered by Ultimate-Energy Mechanical Alloying for All-Solid-State Lithium Metal Batteries

Enhanced air-stability and high Li-ion conductivity of Li6.988P2.994Nb0.2S10.934O0.6 glass-ceramic electrolyte for All-Solid-state Lithium-Sulfur Batteries.

Tailored Li2S–P2S5glass-ceramic Electrolyte by MoS2doping, Possessing High Ionic Conductivity for All-Solid-state Lithium-Sulfur Batteries

Facile Synthesis of Lithium Argyrodite Li5.5PS4.5Br1.5 with High Ionic Conductivity for All-Solid-state Batteries

An Effective Strategy to Enable Argyrodite Sulfides as Superb Solid-State Electrolytes: Safeguarding Remarkable Ionic Conductivity and Interfacial Stability with Electrodes

A Versatile Li 6.5 In 0.25 P 0.75 S 5 I Sulfide Electrolyte Triggered by Ultimate‐Energy Mechanical Alloying for All‐Solid‐State Lithium Metal Batteries

An Air‐Stable and Li‐Metal‐Compatible Glass‐Ceramic Electrolyte enabling High‐Performance All‐Solid‐State Li Metal Batteries

AI-Aided Mapping of the Structure-Composition-Conductivity Relationships of Glass-Ceramic Lithium Thiophosphate Electrolytes

Strong Interfacial Adhesion between the Li 2 S Cathode and a Functional Li 7 P 2.9 Ce 0.2 S 10.9 Cl 0.3 Solid-State Electrolyte Endowed Long-Term Cycle Stability to All-Solid-State Lithium–Sulfur Batteries

Design Unique Air‐Stable and Li–Metal Compatible Sulfide Electrolyte via Exploration of Anion Functional Units for All‐Solid‐State Lithium–Metal Batteries

Yttrium stabilized argyrodite solid electrolyte with enhanced ionic conductivity and interfacial stability for all-solid-state batteries

Enabling High–Voltage "Superconcentrated Ionogel–in–Ceramic" Hybrid Electrolyte with Ultrahigh Ionic Conductivity and Single Li+–ion Transference Number

Enabling Argyrodite Sulfides as Superb Solid‐State Electrolyte with Remarkable Interfacial Stability Against Electrodes

A facile path from fast synthesis of Li-argyrodite conductor to dry forming ultrathin electrolyte membrane for high-energy-density all-solid-state lithium batteries

Artificial Intelligence-Aided Mapping of the Structure-Composition-Conductivity Relationships of Glass-Ceramic Lithium Thiophosphate Electrolytes