Abstract:Argyrodite-type sulfide solid electrolytes (SEs) Li6PS5X (X = Cl, Br, I) have attracted considerable interest lately by providing a promising lithium-ion transport capability for its application in all-solid-state lithium batteries (ASSLBs). However, other than Li6PS5Cl and Li6PS5Br, Li6PS5I shows poor ionic conductivity of 10–7 S cm–1, which is originated from the I–/S2– site ordered arrangement in its structure. Herein, we report a silicon-doped solid electrolyte Li6+xP1–xSixS5I in this sulfide class, which can remarkably increase the conductivity to 1.1 × 10–3 S cm–1 and lower the activation energy to 0.19 eV as a consequence of changing the structural unit in the argyrodite network. The Li6+xP1–xSixS5I solid electrolytes are employed in ASSLBs with Li(Ni0.8Mn0.1Co0.1)O2 (NCM-811) as cathode and Li metal as an anode to evaluate the electrochemical performance. With x = 0.55, the battery displays an initial discharge capacity of 105 mA h g–1 at a rate of 0.05C and achieves high Coulombic efficiency. Moreover, chemical reactions occurring on the interfaces of the NCM/SE and Li/SE in regard to the degradation of cell performance are also investigated.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c11683?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c11683</a>.Morphological characterization of the Li6+xP1–xSixS5I samples; Nyquist plots of Li6+xP1–xSixS5I samples at 30–100 °C; LSV and CV curves of Li6+xP1–xSixS5I samples; and morphological characterization of cathode and Li6.55P0.45Si0.55S5I SE/electrode interfaces before and after cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c11683/suppl_file/am0c11683_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enabling Argyrodite Sulfides as Superb Solid‐State Electrolyte with Remarkable Interfacial Stability Against Electrodes

An Effective Strategy to Enable Argyrodite Sulfides as Superb Solid-State Electrolytes: Safeguarding Remarkable Ionic Conductivity and Interfacial Stability with Electrodes

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Multifunctional Coatings on Sulfide‐Based Solid Electrolyte Powders with Enhanced Processability, Stability, and Performance for Solid‐State Batteries

Argyrodite Solid Electrolyte with a Stable Interface and Superior Dendrite Suppression Capability Realized by ZnO Co-Doping

Silicon-Doped Argyrodite Solid Electrolyte Li6PS5I with Improved Ionic Conductivity and Interfacial Compatibility for High-Performance All-Solid-State Lithium Batteries.

High Air Stability and Excellent Li Metal Compatibility of Argyrodite‐Based Electrolyte Enabling Superior All‐Solid‐State Li Metal Batteries

A Versatile InF3 Substituted Argyrodite Sulfide Electrolyte Toward Ultrathin Films for All‐Solid‐State Lithium Batteries

High performance P-based argyrodite sulfide electrolytes enabled by Sb-based argyrodite doping for all-solid-state lithium metal batteries

A Versatile Li 6.5 In 0.25 P 0.75 S 5 I Sulfide Electrolyte Triggered by Ultimate‐Energy Mechanical Alloying for All‐Solid‐State Lithium Metal Batteries

A Versatile Sn‐Substituted Argyrodite Sulfide Electrolyte for All‐Solid‐State Li Metal Batteries

Interfacial Modification Between Argyrodite-Type Solid-State Electrolytes and Li Metal Anodes Using LiPON Interlayers

Enhancing the interfacial stability between argyrodite sulfide-based solid electrolytes and lithium electrodes through CO2 adsorption

Constructing Stable Anodic Interphase for Quasi-Solid-State Lithium–Sulfur Batteries

A Versatile Li<sub>6.5</sub>In<sub>0.25</sub>P<sub>0.75</sub>S<sub>5</sub>I Sulfide Electrolyte Triggered by Ultimate-Energy Mechanical Alloying for All-Solid-State Lithium Metal Batteries

ZnO Substitution in Argyrodite Li5.5+3xZnxP1‐xOxS4.5‐xBr1.5 Electrolyte with Enhanced Interface Performance for All‐Solid‐State Battery

Styrene–Butadiene–Styrene Block Copolymer-Li5.5PS4.5Cl1.5 Composite Solid-State Electrolyte Enabling a High-Performance All-Solid-State Lithium Battery

Solvent-free design of argyrodite sulfide composite solid electrolyte with superb interface and moisture stability in anode-free lithium metal batteries

Design Unique Air‐Stable and Li–Metal Compatible Sulfide Electrolyte via Exploration of Anion Functional Units for All‐Solid‐State Lithium–Metal Batteries

Ultrastable Anode Interface Achieved by Fluorinating Electrolytes for All-Solid-State Li Metal Batteries

Silicon-Doped Argyrodite Solid Electrolyte Li 6 PS 5 I with Improved Ionic Conductivity and Interfacial Compatibility for High-Performance All-Solid-State Lithium Batteries