Abstract:Despite boasting giant leaps in performance improvement over the years, the current commercial standard, Li-ion batteries, are fast approaching their theoretical limits. Meanwhile, Lithium-Sulfur (Li-S) batteries offering ultra-high theoretical energy density (~2600 Whkg -1 ), cost-effectiveness, and nontoxicity are being seen as promising alternatives. Despite their plentiful advantages, the practicality of Li-S batteries has been largely stymied by several challenges: a) deleterious polysulfide dissolution and ‘shuttle effect’, b) significant volume change of S cathodes during cycling, c) safety concerns with flammable traditional glyme-based electrolyte, and d) the instability of Li anode. To mitigate these challenges, researchers have explored all-solid-state electrolytes, but their poor Li-ion conductivity, high interfacial impedance, and need for expensive, exotic materials and complex fabrication procedures severely limit their practical application. To overcome these challenges, we propose an in-situ gelled polymer-ceramic hybrid silsesquioxane-based electrolyte system. The gelled matrix, thermally crosslinked post cell fabrication, immobilizes the glyme-based liquid electrolyte and exhibits high liquid-like ionic conductivities (1.03 mS.cm -1 ), low interfacial impedance, and high oxidative potential (>4.5V vs. Li/Li + ) . In this study, in addition to vastly decreased flammability, we report superior Li-ion conductivity compared to state-of-art solid-state Li-S electrolytes. This high ionic conductivity translated to a significantly improved specific capacity of 1050 mAh.gS -1 at 0.2 C, elevated Coulombic efficiencies (>98.5%), and elevated rate kinetics. The gelled electrolytes exhibited stable cycling in a large temperature range (-10 o C - 60 o C). Moreover, polysulfide permeation studies and subsequent DFT calculations revealed that the gelled electrolyte exhibited strong chemical absorptivity to lithium polysulfides due to the polar silsesquioxane core, which translated to superior capacity retention (>80% over 200 cycles). Further, post- mortem XPS characterization studies revealed the formation of stable SEI at the anode and cathode, and SEM of cycled anodes showed reduced dendritic formations. Finally, the electrolyte was tested in practical pouch cell architecture, and the cells demonstrated excellent reliability even under mechanical stress. This work successfully reports a robust, rationally designed gelled electrolyte system for developing safe and high-performance quasi-solid state Li-S batteries.

Enabling High–Voltage "Superconcentrated Ionogel–in–Ceramic" Hybrid Electrolyte with Ultrahigh Ionic Conductivity and Single Li+–ion Transference Number

A "Concentrated Ionogel‐in‐Ceramic" Silanization Composite Electrolyte with Superior Bulk Conductivity and Low Interfacial Resistance for Quasi‐Solid‐State Li Metal Batteries

Unraveling the Synergistic Coupling Mechanism of Li + Transport in an “Ionogel‐in‐Ceramic” Hybrid Solid Electrolyte for Rechargeable Lithium Metal Battery

Rationally Designed in-Situ Gelled Polymer-Ceramic Hybrid Electrolyte Enables Superior Performance and Stability in Quasi-Solid-State Lithium-Sulfur Batteries

Unleashing the Potential of Li-Metal Batteries A Breakthrough Ultra-High Room-Temperature Ionic Conductivity Composite Solid-State Electrolyte

Concentrated “ionogel-in-ceramic” and “ionogel-in-polymer” bilayer electrolyte membrane for high-voltage quasi-solid-state lithium metal batteries

Li6.28La3Zr2Al0.24O12-reinforced Single-ion Conducting Composite Polymer Electrolyte for Room-Temperature Li-Metal Batteries

An in-situ generated composite solid-state electrolyte towards high-voltage lithium metal batteries

Li 6.28 La 3 Zr 2 Al 0.24 O 12 -reinforced Single-ion Conducting Composite Polymer Electrolyte for Room-Temperature Li-Metal Batteries

In-Situ Construction of Ceramic–Polymer All-Solid-State Electrolytes for High-Performance Room-Temperature Lithium Metal Batteries

Unlocking the concentration polarization for Solid-State lithium metal batteries

Solid-state nanocomposite ionogel electrolyte with in-situ formed ionic channels for uniform ion-flux and suppressing dendrite formation in lithium metal batteries

A High-Performance, Solution-Processable Polymer/ceramic/ionic Liquid Electrolyte for Room Temperature Solid-State Li Metal Batteries

Synergized Tricomponent All‐Inorganics Solid Electrolyte for Highly Stable Solid‐State Li‐Ion Batteries

Intercalated Electrolyte with High Transference Number for Dendrite‐Free Solid‐State Lithium Batteries

Developing Single‐Ion Conductive Polymer Electrolytes for High‐Energy‐Density Solid State Batteries

A dielectric electrolyte composite with high lithium-ion conductivity for high-voltage solid-state lithium metal batteries

Interphase Engineering Enabled All-Ceramic Lithium Battery

High-Performance Poly(vinylidene fluoride-hexafluoropropylene)-Based Composite Electrolytes with Excellent Interfacial Compatibility for Room-Temperature All-Solid-State Lithium Metal Batteries

A highly ionic transference number eutectogel hybrid electrolytes based on spontaneous coupling inhibitor for solid-state lithium metal batteries

Core-shell structure nanofibers-ceramic nanowires based composite electrolytes with high Li transference number for high-performance all-solid-state lithium metal batteries