Abstract:The need for safe storage systems with a high energy density has increased the interest in high-voltage solid-state Li-metal batteries (LMBs). Solid-state electrolytes, as a key material for LMBs, must be stable against both high-voltage cathodes and Li anodes. However, the weak interfacial contact between the electrolytes and electrodes poses challenges in the practical applications of LMBs. In this study, a double-layered solid composite electrolyte (DLSCE) was synthesized by introducing an antioxidative poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP)-10 wt % Li1.3Al0.3Ti1.7(PO4)3 (LATP) to the cathode interface, whereas a lithium-friendly poly(oxyethylene) (PEO)-5 wt % LATP was made to come into contact with Li metal. Owing to the heterogeneous double-layered structure of the DLSCE, a high ionic transfer number (0.43), high ionic conductivity (1.49 × 10–4 S/cm), and a wide redox window (4.82 V) were obtained at ambient temperature. Moreover, the DLSCE showed excellent Li-metal stability, thereby enabling the Li–Li symmetric cells to stably run for over 600 h at 0.2 mA/cm2 with effective lithium dendrite inhibition. When paired with a high-voltage LiNi1/3Co1/3Mn1/3O2 cathode, the Li/DLSCE/NCM111 cell exhibited excellent electrochemical performance: long-term cyclability with 85% capacity retention could be conducted at 0.2C after 100 cycles corresponding to 100% Coulombic efficiencies.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22532?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22532</a>.EIS and FTIR spectra; SEM image and size distribution of pristine; the TG plot and DSC profiles; LSV curves and the schematic of the intermolecular-hydrogen-binding effect between PVDF-HFP and PEO membranes; voltage profiles of Li symmetrical cells; the lithium-metal surface before battery cycle and the cross-sectional images of the NCM111/DLSCE/Li cell after cycling; cycling performance of the NCM111/PVDF-HFP-10 wt % LATP/Li battery; and EIS of NCM111/Li cells before and after cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22532/suppl_file/am0c22532_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

A "Concentrated Ionogel‐in‐Ceramic" Silanization Composite Electrolyte with Superior Bulk Conductivity and Low Interfacial Resistance for Quasi‐Solid‐State Li Metal Batteries

Solid-state nanocomposite ionogel electrolyte with in-situ formed ionic channels for uniform ion-flux and suppressing dendrite formation in lithium metal batteries

Inorganic Filler Enhanced Formation of Stable Inorganic‐Rich Solid Electrolyte Interphase for High Performance Lithium Metal Batteries

In Situ Construction of Li3N-enriched Interface Enabling Ultra-Stable Solid-State LiNi0.8Co0.1Mn0.1O2/lithium Metal Batteries

An in-situ generated composite solid-state electrolyte towards high-voltage lithium metal batteries

High-performance lithium metal batteries with ultraconformal interfacial contacts of quasi-solid electrolyte to electrodes

Molecular Coordination Induced High Ionic Conductivity of Composite Electrolytes and Stable LiF/Li 3 N Interface in Long-Term Cycling All-Solid-State Lithium Metal Batteries

High-Performance Solid-State Lithium Metal Batteries of Garnet/Polymer Composite Thin-Film Electrolyte with Domain-Limited Ion Transport Pathways.

Built-in garnet-rich composite solid electrolyte towards fast ion transport and dendrite-free for high-energy lithium batteries

Enabling High–Voltage "Superconcentrated Ionogel–in–Ceramic" Hybrid Electrolyte with Ultrahigh Ionic Conductivity and Single Li+–ion Transference Number

Single‐Ion Conductive Polymer‐Based Composite Electrolytes for High‐Performance Solid‐State Lithium Metal Batteries

Garnet-rich Composite Solid Electrolytes for Dendrite-Free, High-Rate, Solid-State Lithium-Metal Batteries

Fluorine-regulated cathode electrolyte interphase enables high-energy quasi-solid-state lithium metal batteries

Low Concentration Sulfolane-Based Electrolyte for High Voltage Lithium Metal Batteries

Concentrated “ionogel-in-ceramic” and “ionogel-in-polymer” bilayer electrolyte membrane for high-voltage quasi-solid-state lithium metal batteries

Towards high-performance lithium metal batteries: sol electrolyte generated with mesoporous silica

Dilutedly localized high-concentration ionogel electrolyte enabling high-voltage quasi-solid-state lithium metal batteries

Composite Hybrid Quasi-Solid Electrolyte for High-Energy Lithium Metal Batteries

Intercalated Electrolyte with High Transference Number for Dendrite‐Free Solid‐State Lithium Batteries

Double-Layered Multifunctional Composite Electrolytes for High-Voltage Solid-State Lithium-Metal Batteries

Unraveling the Synergistic Coupling Mechanism of Li + Transport in an “Ionogel‐in‐Ceramic” Hybrid Solid Electrolyte for Rechargeable Lithium Metal Battery