Abstract:This work proposes a wide‐temperature localized high‐concentration electrolytes (LHCE) with a high safety feature. A particular electrolyte additive of the electrolytes, 1‐fluoroethyl methyl carbonate (1FEMC), is explored to improve the performance of electrolytes with a better interfacial stability than the previously reported multifunctional additive (4,5‐difluoro‐1,3‐dioxolan‐2‐one DFEC). The 1FEMC achieves an inorganic‐dominated solid electrolyte interphase at both cathode and anode, which leads to an uniform lithium deposition and inhibits the electrolyte decomposition as well as cathode degradation. This LHCE achieves over 300 stable cycles for both LiNi0.9Mn0.05Co0.05O2||Li cells and LiCoO2||Li cells, as well as 50 cycles for LiNi0.8Mn0.1Co0.1O2 (NCM811||Li) pouch cells. Additionally, NCM811||Li cells maintains 84% discharge capacity at −20 °C (compared with that at room temperature). This work presents a research foundation for designing safer Li‐metal batteries that operate in a wide temperature range. The increasing need for energy storage devices with high energy density has led to significant interest in Li‐metal batteries (LMBs). However, the use of commercial electrolytes in LMBs is problematic due to their flammability, inadequate performance at low temperatures, and tendency to promote the growth of lithium dendrites and other flaws. This study introduces a localized high‐concentration electrolyte (LHCE) that addresses these issues by employing non‐flammable electrolyte components and incorporating carefully designed additives to enhance flame retardancy and low‐temperature performance. By incorporating additives to optimize the electrolyte, it is possible to attain inorganic‐dominated solid electrolyte interphases on both the cathode and anode. This achievement results in a uniform deposition of lithium, as well as the suppression of electrolyte decomposition and cathode deterioration. Consequently, this LHCE achieve over 300 stable cycles for both LiNi0.9Mn0.05Co0.05O2||Li cells and LiCoO2||Li cells, as well as 50 cycles for LiNi0.8Mn0.1Co0.1O2 (NCM811||Li) pouch cells. Furthermore, NCM811||Li cells maintain 84% discharge capacity at −20 °C, in comparison to the capacity at room temperature. The utilization of this electrolyte presents novel perspectives for the safe implementation of LMBs.

Fluorine-regulated cathode electrolyte interphase enables high-energy quasi-solid-state lithium metal batteries

Ordered LiNi0.5Mn1.5O4 Cathode in Bis(fluorosulfonyl)imide-Based Ionic Liquid Electrolyte: Importance of the Cathode-Electrolyte Interphase

Highly Fluorinated Interphases Enable High-Voltage Li-Metal Batteries

Locally Fluorinated Electrolyte Medium Layer for High-Performance Anode-Free Li-Metal Batteries.

Fluorinated boron nitride nanosheet enhanced ultrathin and conductive polymer electrolyte for high‐rate solid‐state lithium metal batteries

Enhancing stable LiF-rich interface formation of polyester based electrolyte using fluoroethylene carbonate for quasi-solid state lithium metal batteries

Stable Li–Metal Batteries Enabled by in Situ Gelation of an Electrolyte and In-Built Fluorinated Solid Electrolyte Interface

LiF-Rich Interfaces and HF Elimination Achieved by a Multifunctional Additive Enable High-Performance Li/LiNi0.8Co0.1Mn0.1O2 Batteries.

Hybrid poly-ether/carbonate ester electrolyte engineering enables high oxidative stability for quasi-solid-state lithium metal batteries

1,3,5-Trifluorobenzene and fluorobenzene co-assisted electrolyte with thermodynamic and interfacial stabilities for high-voltage lithium metal battery

A "Concentrated Ionogel‐in‐Ceramic" Silanization Composite Electrolyte with Superior Bulk Conductivity and Low Interfacial Resistance for Quasi‐Solid‐State Li Metal Batteries

Fluorinated Carbonate‐Aided Ionic‐Liquid Electrolyte Enables High‐Capacity Lithium Metal Batteries

Fluorinating Solid Electrolyte Interphase by Regulating Polymer–Solvent Interaction in Lithium Metal Batteries

Stable LiF‐Rich Electrode–Electrolyte Interface toward High‐Voltage and High‐Energy‐Density Lithium Metal Solid Batteries

In Situ Formed Gel Polymer Electrolytes Enable Stable Solid Electrolyte Interface for High-Performance Lithium Metal Batteries

A stable quasi-solid electrolyte improves the safe operation of highly efficient lithium-metal pouch cells in harsh environments

Monolithic solid–electrolyte interphases formed in fluorinated orthoformate-based electrolytes minimize Li depletion and pulverization

In-situ generation of fluorinated polycarbonate copolymer solid electrolytes for high-voltage Li-metal batteries

Remodeling Highly Fluorinated Electrolyte via Shielding Agent Regulation toward Practical Lithium Metal Batteries

Achieving Uniform Li Deposition and Suppressed Electrolyte Flammability in Li‐Metal Batteries via Designing Localized High‐Concentration Electrolytes

Constructing Robust LiF‐Enriched Interfaces in High‐Voltage Solid‐State Lithium Batteries Utilizing Tailored Oriented Ceramic Fiber Electrolytes