In situ soft-chemistry synthesis of β-Na0.33V2O5 nanorods as high-performance cathode for lithium-ion batteries

Pan-Pan Wang,Cheng-Yan Xu,Fei-Xiang Ma,Li Yang,Liang Zhen

DOI: https://doi.org/10.1039/c6ra23484d

IF: 4.036

2016-01-01

RSC Advances

Abstract:β-Na0.33V2O5 nanorods were prepared via a facile soft-chemistry strategy using Na+ intercalated (NH4)0.5V2O5 nanosheets as precursor.

What problem does this paper attempt to address?

In situ soft-chemistry synthesis of beta-Na0.33V2O5 nanorods as high-performance cathode for lithium-ion batteries

Wang Pan-Pan,Xu Cheng-Yan,Ma Fei-Xiang,Yang Li,Zhen Liang

DOI: https://doi.org/10.1039/c6ra23484d

IF: 4.036

2016-01-01

RSC Advances

Abstract:beta-Na0.33V2O5 nanorods were prepared via a facile soft-chemistry strategy using Na+ intercalated (NH4)(0.5)V2O5 nanosheets as precursor. Based on X-ray diffraction, Fourier transform infrared spectra and scanning electron microscope analysis, the formation mechanism of beta-Na0.33V2O5 nanorods is proposed, which involves cation co-intercalation and crystal structure slip as well as a phase transformation process induced by cation release. When used as cathode for lithium-ion batteries, beta-Na0.33V2O5 nanorods calcined at 600 degrees C exhibited good stable cycling behaviour with high capacity retention of 81.3% after 50 cycles. Reversible discharge capacities of 237.8, 199.8, 183.5, 151.7 mA h g(-1) and 110.5 mA h g(-1) can be delivered at 30, 60, 150, 300 and 600 mA g(-1), respectively. It is expected that the Na0.33V2O5 nanorods could be employed as a promising cathode material in rechargeable lithium-ion batteries.
Facile synthesis of NaV6O15 nanorods and its electrochemical behavior as cathode material in rechargeable lithium batteries

Haimei Liu,Yonggang Wang,Liang Li,Kaixue Wang,Eiji Hosono,Haoshen Zhou

DOI: https://doi.org/10.1039/b912906e

2009-01-01

Journal of Materials Chemistry

Abstract:A ternary vanadium bronze compound, NaV6O15 (Na0.33V2O5), constructed by highly ordered nanorod structures, was facilely synthesized via a low temperature hydrothermal route using V2O5, H2O2 and NaCl as the precursors. A reaction mechanism involved in present hydrothermal condition was tentatively proposed. The sample was systemically post-treated at different temperatures and well characterized by various techniques. It was found that the prepared NaV6O15 nanorods had a highly crystallined single phase with a preferred c* orientation growth. When used as the cathode material in rechargeable lithium batteries, the NaV6O15 nanorods exhibited stable lithium-ion insertion/deinsertion reversibility and delivered as high as 328 mAh g(-1) lithium cycled at the current density of 0.02 A g(-1). In galvanostatic cycling test, a specific discharge capacity of around 300 mAh g(-1) could be demonstrated for 70 cycles under 0.05 A g(-1) current density. According to its unique crystallographic structure and electrochemical characteristics, it is therefore expected that as-prepared NaV6O15 nanorods may be employed as cathode material in rechargeable lithium, sodium-based batteries.
Synthesis of Co3O4@SnO2@C core-shell nanorods with superior reversible lithium-ion storage

yue qi,hui zhang,ning du,chuanxin zhai,deren yang

DOI: https://doi.org/10.1039/c2ra21765a

IF: 4.036

2012-01-01

RSC Advances

Abstract:This paper describes a facile hydrothermal and subsequent carbonization approach for the synthesis of Co3O4@SnO2@C core-shell nanorods. The as-synthesized Co3O4@SnO2@ C nanorods have been applied as anode materials for lithium-ion batteries, which exhibit improved cyclic performance and enhanced power capability. Both Co3O4 and SnO2 are electrochemically active materials, and the hybridization of Co3O4 and SnO2 into an integrated core-shell nanorod structure makes them an elegant synergistic effect when participating in the lithium-ion charge-discharge process. In addition, the carbon matrix has good volume buffering effect and high electronic conductivity, which may be responsible for the improved electrochemical performance.
A Simple Method for the Synthesis of KV3O8·0.42H2O Nanorod and Its Lithium Insertion/Deinsertion Properties

Bijun Feng,Dan Sun,Haiyan Wang,Shuai Tan,Hui Zhang

2012-01-01

Abstract:A facile and large-scale hydrothermal method was introduced to synthesize KV3O8 nanorod as cathode material for Li-ion battery. The nanorods are composed of KV3O8·0.42H2O based on the results of Xray diffraction (XRD), Fourier transform infrared spectrum (FT-IR), differential scanning calorimetry and thermal gravimetry (DSC/TG). Meanwhile, it shows a width of 80-230 nm and a length of up to several micrometers by transmission electron microscopy (TEM). The nanorods deliver an initial specific discharge capacity of 130.1 mAh g -1 during 1.5~4.0 V at 15 mA g -1 , with a capacity retention of 87.9% after 20 cycles. XRD results confirm that the electrode possesses good structure stability during lithium ion insertion and extraction.
In Situ Synthesis of Liv3o8 Nanorods on Graphene As High Rate-Performance Cathode Materials for Rechargeable Lithium Batteries

Runwei Mo,Ying Du,Neiqing Zhang,David Rooney,Kening Sun

DOI: https://doi.org/10.1039/c3cc43975e

IF: 4.9

2013-01-01

Chemical Communications

Abstract:We developed a facile two-step hydrothermal procedure to prepare hybrid materials of LiV3O8 nanorods on graphene sheets. The special structure endows them with the high-rate transportation of electrolyte ions and electrons throughout the electrode matrix, resulting in remarkable electrochemical performance when they were used as cathodes in rechargeable lithium batteries.
A Simple Method for the Synthesis of KV3O80.42H2O Nanorod and Its Lithium Insertion/Deinsertion Properties

Bijun Feng,Dan Sun,Haiyan Wang,Shuai Tan,Hui Zhang

DOI: https://doi.org/10.1016/s1452-3981(23)14083-1

IF: 1.541

2013-01-01

International Journal of Electrochemical Science

Abstract:A facile and large-scale hydrothermal method was introduced to synthesize KV3O8 nanorod as cathode material for Li-ion battery. The nanorods are composed of KV3O8∙0.42H2O based on the results of X- ray diffraction (XRD), Fourier transform infrared spectrum (FT-IR), differential scanning calorimetry and thermal gravimetry (DSC/TG). Meanwhile, it shows a width of 80-230 nm and a length of up to several micrometers by transmission electron microscopy (TEM). The nanorods deliver an initial specific discharge capacity of 130.1 mAh g-1 during 1.5~4.0 V at 15 mA g-1, with a capacity retention of 87.9% after 20 cycles. XRD results confirm that the electrode possesses good structure stability during lithium ion insertion and extraction.
Synthesis and Electrochemical Properties of Nav3o8 Nanoflakes As High-Performance Cathode for Li-Ion Battery

Yougen Tang,Dan Sun,Haiyan Wang,Xiaobing Huang,Hui Zhang,Suqin Liu,Younian Liu

DOI: https://doi.org/10.1039/c3ra44733b

IF: 4.036

2014-01-01

RSC Advances

Abstract:In the current work, NaV3O8 nanoflakes were fabricated by a novel two-step approach using VO2(B) nanoflakes as a sacrificial template. The as-prepared NaV3O8 was characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results showed that NaV3O8 sintered at 400 °C had a suitable degree of crystallinity and demonstrated uniform nanoflake morphology, 100–200 nm in width, 500–800 nm in length and 30–50 nm in thickness. When used as a cathode material for Li-ion batteries, it showed good cyclic performance (a discharge capacity of 210 mA h g−1 remained after 30 cycles at 30 mA g−1 and no capacity fading occurred over 100 cycles at 150 mA g−1). The rate capability was 113.4 mA h g−1 and 91.5 mA h g−1 in 6 C and 10 C, respectively. XRD patterns of NaV3O8 electrodes at different voltages revealed a single-phase reaction mechanism and small crystal volume change (∼3%) during the lithium intercalation/deintercalation processes.
Hydrothermal synthesis and rate capacity studies of Li3V2(PO4)3 nanorods as cathode material for lithium-ion batteries

Haowen Liu,Cuixia Cheng,Xintang Huang,Jinlin Li

DOI: https://doi.org/10.1016/j.electacta.2010.07.049

IF: 6.6

2010-01-01

Electrochimica Acta

Abstract:It is an effective method by synthesizing one-dimensional nanostructure to improve the rate performances of cathode materials for Li-ion batteries. In this paper, Li3V2(PO4)3 nanorods were successfully prepared by hydrothermal reaction method. The structure, composition and shape of the prepared were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scan electron microscope (SEM) and transmission electron microscope (TEM), respectively. The data indicate the as-synthesis powders are defect-rich nanorods and the sizes are the length of several hundreds of nanometers to 1μm and the diameter of about 60nm. The preferential growth direction of the prepared material was the [120]. The electrodes consisting of the Li3V2(PO4)3 nanorods show the better discharge capacities at high rates over a potential range of 3.0–4.6V. These results can be attributed to the shorter distance of electron transport and the fact that ion diffusion in the electrode material is limited by the nanorod radius. All these results indicate that the resulting Li3V2(PO4)3 nanorods are promising cathode materials in lithium-ion batteries.
Mesoporous Single-Crystalline V2o5 Nanorods Assembled into Hollow Microspheres As Cathode Materials for High-Rate and Long-Life Lithium-Ion Batteries

Qi Yue,Hao Jiang,Yanjie Hu,Guiqi Jia,Chunzhong Li

DOI: https://doi.org/10.1039/c4cc06733a

IF: 4.9

2014-01-01

Chemical Communications

Abstract:Mesoporous single-crystalline V2O5 nanorods assembled into novel hollow microspheres have been synthesized as cathode materials for lithium-ion batteries by a simple solvothermal treatment of NH4VO3 and ethylene glycol with subsequent annealing in air at 400 °C, which delivered a very high reversible capacity of 145.8 mA h g(-1) at 2.5-4.0 V (vs. theoretical value: 147 mA h g(-1)) with much improved capacity retention and long cycle life at various rates.
Orthorhombic Limno2 Nanorods As Cathode Materials for Lithium-Ion Batteries: Synthesis and Electrochemical Properties

Hongyuan Zhao,Shanshan Liu,Xingquan Liu,Ming Tan,Zhenwei Wang,Yu Cai,Sridhar Komarneni

DOI: https://doi.org/10.1016/j.ceramint.2016.01.207

IF: 5.532

2016-01-01

Ceramics International

Abstract:A simple solid-state process was developed to prepare the orthorhombic LiMnO2 nanorods by using Mn2O3 nanorods as a template, the latter was prepared via a thermal decomposition process. The obtained product showed good rod-shaped morphology and could be indexed to the orthorhombic LiMnO2 with a space group of Pmnm. Electrochemical tests showed that the LiMnO2 nanorods exhibited a discharge capacity of 183.2mAhg−1 with high coulombic efficiency at 0.1C between 2.0 and 4.3V. After 35 cycles, the discharge capacity still reached up to 175.6mAhg−1, which is a high capacity retention. Furthermore, the LiMnO2 nanorods presented excellent rate capability and small charge transfer resistance. Such high performance might be ascribed to the one-dimensional nanostructures with good crystallinity, which could effectively facilitate the charge and electron transport and enhance the electrode-filled ratio.
Electrochemical insertion/deinsertion of sodium on NaV6O 15 nanorods as cathode material of rechargeable sodium-based batteries

Haimei Liu,Haoshen Zhou,Lipeng Chen,Zhanfeng Tang,Wensheng Yang

DOI: https://doi.org/10.1016/j.jpowsour.2010.07.062

IF: 9.2

2011-01-01

Journal of Power Sources

Abstract:A well defined nano-structured material, NaV6O15 nanorods, was synthesized by a facile low temperature hydrothermal method. It can perform well as the cathode material of rechargeable sodium batteries. It was found that the NaV6O15 nanorods exhibited stable sodium-ion insertion/deinsertion reversibility and delivered 142mAhg−1 sodium ions when worked at a current density of 0.02Ag−1. In galvanostatic cycling test, a specific discharge capacity of around 75mAhg−1 could be obtained after 30 cycles under 0.05Ag−1 current density. Concerned to its good electrochemical performance for reversible delivery of sodium ions, it is thus expected that NaV6O15 may be used as cathode material for rechargeable sodium batteries with highly environmental friendship and low cost.
Synthesis of Li1.2Mn0.54Ni0.13Co0.13O2 Nanorods by a Facile Self-Template Method and Their Electrochemical Performances

Jinjin Wang,Xinlu Wang,Qingnan Feng,Chenglong Shao,Guixia Liu,Wensheng Yu,Xiangting Dong,Jinxian Wang

DOI: https://doi.org/10.1142/s1793292022500503

2022-01-01

NANO

Abstract:Lithium-rich manganese-based oxides have become one of the widely studied cathode materials for lithium-ion batteries due to their high-energy density, relatively low price and environmental friendliness. Herein, we propose a simple self-template route to prepare [Formula: see text][Formula: see text][Formula: see text][Formula: see text]O2 nanorods using rod-like Mn2O3 as templates. Besides, the effect of calcination temperature on the morphology and electrochemical properties of the electrode materials was investigated. [Formula: see text][Formula: see text][Formula: see text][Formula: see text]O2 nanorods as the cathode exhibit initial capacity of 251.4 mAh gt1 at 0.1 C and capacity retention rate of 67.9% after 200 cycles, which can be attributed to the enhanced layered structural stability, lower charge transfer resistance and shorter lithium-ion transport pathway.
Facile Preparation of Li0.44MnO2 Nanorods and Their Enhanced Electrochemical Lithium Storage Performance

Cai Liu,Xiaoming Peng,Guyue Shang,Ruijun Ju,Gang Tian,Guoxu He,Cong Yang,Liang Chen

DOI: https://doi.org/10.1166/jnn.2020.17168

2019-01-01

Journal of Nanoscience and Nanotechnology

Abstract:In this paper, we present a fast and green method to prepare Li0.44MnO₂ nanorods by Li/Na ion exchange of Na0.44MnO₂ templates. XRD and SEM confirm that the products still maintain the crystal and geometric structure of Na0.44MnO₂ temples. Electrochemical tests show the capacity of Li0.44MnO₂ nanorods is up to 218 mAh · g-1 at the current density of 0.1 A · g-1. Especially, the capacity of electrode is still located at 90 mAh · g-1 at the current density of 5.0 A· g-1 after cycling for 100 times. So Li0.44MnO₂ nanorods have a potential application in the next generation of advanced batteries.
Tailored Synthesis of High-Performance Na3V2(PO4)3 for Na-Ion Batteries Through the Sol-Gel Process

Zhaojin Li,Yunbo Di,Wei Song,Di Zhang,Huilan Sun,Qujiang Sun,Yufeng Zhu,Bo Wang

DOI: https://doi.org/10.1021/acsaem.4c02316

IF: 6.4

2024-01-01

ACS Applied Energy Materials

Abstract:Na3V2(PO4)(3) is a typical cathode material for sodium-ion batteries and is usually prepared by the sol-gel method. However, Na3V2(PO4)(3 )is far from the level of tailored preparation due to the lack of understanding of the structure evolution during the sol-gel process. Here, we revealed that the initially formed vanadyl citrate is cross-linked by intermolecular hydrogen bonds, forming large polymers. Therefore, the crystal size of the precursor as well as the final Na3V2(PO4)(3) can be controlled by adjusting the pH value of the solution. As a result, the optimized NVP-7 material exhibited a specific discharge capacity of 59.8 mAh g(-1) at 50 C and can still retain 82.9% of the initial capacity after 500 cycles at 1 C. This study provides a theoretical basis for controllable preparation of NVP materials by the sol-gel method.
Controllable Synthesis and in Situ TEM Study of Lithiation Mechanism of High Performance NaV3O8 Cathodes

Xinyong Tao,Kuan Wang,Hongtao Wang,Qianqian Li,Yang Xia,Hui Huang,Yongping Gan,Chu Liang,Wenkui Zhang

DOI: https://doi.org/10.1039/c4ta05128a

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:We report a controllable one-step calcination synthesis of NaV3O8 nanobelts, nanorods and microrods. In situ TEM characterization confirms the basic lithiation mechanism of NaV3O8 cathode materials.
Facile synthesis of Nb2O5 nanobelts assembled from nanorods and their applications in lithium ion batteries

Xiaodi Liu,Guangyin Liu,Hao Chen,Jianmin Ma,Ruixue Zhang

DOI: https://doi.org/10.1016/j.jpcs.2017.07.007

IF: 4.383

2017-01-01

Journal of Physics and Chemistry of Solids

Abstract:Hierarchical 1D Nb2O5 nanobelts are successfully synthesized via a facile solvothermal method and following thermal treatment. The as-formed Nb2O5 nanobelts are characterized by XRD, FESEM, TEM, and BET, and the results indicate that they possess pseudohexagonal structure and are composed of ultranarrow nanorods with an average diameter of ca. 15 nm. When used as anodic materials for lithium ion batteries, the obtained Nb2O5 nanobelts can deliver initial discharge capacities of 209.3 mAh g−1 at the current density of 0.5 C. In addition, the Nb2O5 nanobelts exhibit a reversible capacity of 95.8 mAh g−1 after 200 cycles at relatively high current density of 5 C. The good electrochemical performance of the Nb2O5 nanobelts may be ascribed to their good monodispersity, high specific surface areas, and narrow rod-like building blocks. The Nb2O5 nanobelts can be developed as promising anodes for high-rate 2 V LIBs with good safety.
Rational design of V2O5 nanorod anchored carbon microsphere cathode materials for improved-performance lithium-ion batteries

Bingbing Hu,Jiayu Jiang,Yu Deng,Dongshan Li,Xinyao Yang,Tianlun Du,Yingyang Zhao,Zideng Zhou,Ye Zou,Hong Pu,Guangqiang Ma

DOI: https://doi.org/10.1007/s11581-024-05586-2

IF: 2.961

2024-05-23

Ionics

Abstract:The V 2 O 5 nanorods based on carbon spheres (VOR@CSs) were successfully fabricated via anchoring the VOR architecture onto the surface of CSs with hydrothermal and chemical impregnation treatment. The agglomeration of VOR can be decreased due to the CSs being the core of the growth of VOR materials, which effectively support the VOR and expose more reaction active sites. Meanwhile, the CSs can be used as a conductive carbon to significantly enhance the electrical conductivity of composites. Consequently, the VOR@CSs material with special hierarchical structure exhibits a preeminent electrochemical performance; it demonstrates an excellent initial specific discharge capacity of 270 mA h g –1 (coulombic efficiency approach to 100.0%), which is far superior to the VOR for 160 mA h g –1 . In addition, more than 82.9% capacitance of the VOR@CSs can be retained after 50 cycles, comparing only 58.1% capacitance retention for VOR. This promising VOR@CSs composite modified from VOR has significantly promoted the application in the practical production of developing high-performance lithium-ion batteries.

chemistry, physical,physics, condensed matter,electrochemistry
Synthesis and Electrochemical Properties of Single-Crystalline Liv3o8 Nanorods As Cathode Materials for Rechargeable Lithium Batteries

Haimei Liu,Yonggang Wang,Kaixue Wang,Yarong Wang,Haoshen Zhou

DOI: https://doi.org/10.1016/j.jpowsour.2009.03.066

IF: 9.2

2009-01-01

Journal of Power Sources

Abstract:One-dimensional (1D) nanorods of LiV3O8 single crystals have been fabricated by using well-defined home-made VO2 (B) nanorods as the vanadium resource, combined with a convenient solid-state reaction. The as-obtained LiV3O8 nanorods were characterized by XRD, TEM and SEM, indicating this material was highly crystalline and a single phase. The electrochemical performance of LiV3O8 nanorods as the positive electrode material for rechargeable lithium batteries was investigated, which demonstrated that as-prepared LiV3O8 nanorods exhibited as high as 348mAhg−1 discharge capacity in first cycle at 20mAg−1 current density, and still remained at 303mAhg−1 at 50mAg−1 afterwards; moreover, until 50 cycles, they kept 315mAhg−1, recorded at 50mAg−1. All these results imply that single-crystalline 1D nanorods of LiV3O8 are promising cathode material for rechargeable lithium batteries.
Facile synthesis of orthorhombic LiMnO2 nanorods by in-situ carbothermal reduction: Promising cathode material for Li ion batteries

Hongyuan Zhao,Jing Wang,Guifang Wang,Shanshan Liu,Ming Tan,Xingquan Liu,Sridhar Komarneni

DOI: https://doi.org/10.1016/j.ceramint.2017.04.158

IF: 5.532

2017-01-01

Ceramics International

Abstract:Orthorhombic LiMnO2 nanorods were prepared via a simple and economical in-situ carbothermal reduction method using nanorod-like Mno(2) as both template and manganese precursor. The obtained product showed high purity and excellent electrochemical performance. When used as a cathode material, it exhibited 165.3 mAh g(-1) capacity with low capacity loss at 0.1 C. After 40 cycles, only 7.4% of discharge capacity was lost in the cycling process. Moreover, the maximum discharge capacities of 227.5 and 95.3 mAh g(-1) could be delivered at low and high rates of 0.05 and 1.0 C, respectively.
A Simple, Low-Cost and Eco-Friendly Approach to Synthesize Single-Crystalline Limn2o4 Nanorods with High Electrochemical Performance for Lithium-Ion Batteries

Hongyuan Zhao,Fang Li,Xingquan Liu,Weiqiang Xiong,Bing Chen,Huailing Shao,Dongyang Que,Zheng Zhang,Yue Wu

DOI: https://doi.org/10.1016/j.electacta.2015.03.040

IF: 6.6

2015-01-01

Electrochimica Acta

Abstract:The single-crystalline LiMn2O4 nanorods were successfully synthesized by a simple, low-cost and eco-friendly approach in which the γ-MnOOH nanorods were prepared through a facile hydrothermal process, in which KMnO4 was reduced by anhydrous alcohol (CH3CH2OH) without adding any template reagent or additional surfactant. The crystal structures and morphologies of synthesized materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), respectively. The results showed that the γ-MnOOH nanorods had high crystallinity and well-shaped morphology with an average diameter of 200nm and an average length of 12μm. For the resulting LiMn2O4 nanorods, the electrochemical properties were investigated by galvanostatic charge-discharge test, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). For the optimal LiMn2O4 nanorods, the initial discharge capacity was 123.5mAhg−1 and remained 110.2mAhg−1 after 100 cycles at 1.0C in the voltage range of 3.20∼4.35V. Moreover, the optimal LiMn2O4 nanorods can present superior rate performance, especially the capacity recovery performance as the charge-discharge rate restores to 0.1C from 5.0C. Such excellent electrochemical performance could make them to be the promising cathode material for high performance lithium-ion batteries.

In situ soft-chemistry synthesis of β-Na<sub>0.33</sub>V<sub>2</sub>O<sub>5</sub> nanorods as high-performance cathode for lithium-ion batteries

In situ soft-chemistry synthesis of beta-Na0.33V2O5 nanorods as high-performance cathode for lithium-ion batteries

Facile synthesis of NaV6O15 nanorods and its electrochemical behavior as cathode material in rechargeable lithium batteries

Synthesis of Co3O4@SnO2@C core-shell nanorods with superior reversible lithium-ion storage

A Simple Method for the Synthesis of KV3O8·0.42H2O Nanorod and Its Lithium Insertion/Deinsertion Properties

In Situ Synthesis of Liv3o8 Nanorods on Graphene As High Rate-Performance Cathode Materials for Rechargeable Lithium Batteries

A Simple Method for the Synthesis of KV3O80.42H2O Nanorod and Its Lithium Insertion/Deinsertion Properties

Synthesis and Electrochemical Properties of Nav3o8 Nanoflakes As High-Performance Cathode for Li-Ion Battery

Hydrothermal synthesis and rate capacity studies of Li3V2(PO4)3 nanorods as cathode material for lithium-ion batteries

Mesoporous Single-Crystalline V2o5 Nanorods Assembled into Hollow Microspheres As Cathode Materials for High-Rate and Long-Life Lithium-Ion Batteries

Orthorhombic Limno2 Nanorods As Cathode Materials for Lithium-Ion Batteries: Synthesis and Electrochemical Properties

Electrochemical insertion/deinsertion of sodium on NaV6O 15 nanorods as cathode material of rechargeable sodium-based batteries

Synthesis of Li1.2Mn0.54Ni0.13Co0.13O2 Nanorods by a Facile Self-Template Method and Their Electrochemical Performances

Facile Preparation of Li0.44MnO2 Nanorods and Their Enhanced Electrochemical Lithium Storage Performance

Tailored Synthesis of High-Performance Na3V2(PO4)3 for Na-Ion Batteries Through the Sol-Gel Process

Controllable Synthesis and in Situ TEM Study of Lithiation Mechanism of High Performance NaV3O8 Cathodes

Facile synthesis of Nb2O5 nanobelts assembled from nanorods and their applications in lithium ion batteries

Rational design of V2O5 nanorod anchored carbon microsphere cathode materials for improved-performance lithium-ion batteries

Synthesis and Electrochemical Properties of Single-Crystalline Liv3o8 Nanorods As Cathode Materials for Rechargeable Lithium Batteries

Facile synthesis of orthorhombic LiMnO2 nanorods by in-situ carbothermal reduction: Promising cathode material for Li ion batteries

A Simple, Low-Cost and Eco-Friendly Approach to Synthesize Single-Crystalline Limn2o4 Nanorods with High Electrochemical Performance for Lithium-Ion Batteries