Abstract:A simple, green, efficient, and controllable electrochemical potential perturbation method has been developed to synthesize Mn3O4 nanomaterials. No toxic or explosive chemicals are used during the fabrication process. Taking pure Mn metal as the working electrode and 2 M KCl aqueous solution as the electrolyte solution, the Mn3O4 products with rod-like, spherical-like and mixed structures can be obtained through cyclic voltammetry technology under rapid scan rates of 5, 200 and 50 V s−1 within a potential range of −2.0 to 2.0 V (vs Saturated calomel electrode, SCE), respectively. Rapid and repeated redox treatment of Mn metal surface accompanying intense oxygen and hydrogen evolution will lead to the dispersion of Mn metal and the formation of the Mn3O4 nanomaterials. The lithium-ion storage behaviors of these as-fabricated Mn3O4 nanomaterials have been studied contrastively, showing that the spherical-like Mn3O4-S nanoparticles with the highest Li-ion chemical diffusion coefficient display the best cycling stability and rate capability. As a consequence, it shows an excellent specific capacity of up to 780 mAh g−1 after 250 cycles a high rate of 1000 mA g−1 and a good rate capability of 895, 798, 722, 683, 601 and 530 mAh g−1 at current densities of 200, 500, 800, 1000, 1500 and 2000 mA g−1, respectively. This work is of importance for energy storage as it provides a new and efficient electrochemical way for the fabrication of anode materials for the next-generation LIBs with outstanding electrochemical performances.

Facile Preparation of Li0.44MnO2 Nanorods and Their Enhanced Electrochemical Lithium Storage Performance

Ascorbic Acid-Assisted Solvothermal Synthesis of LiMn 0.9 Fe 0.1 PO 4 /C Nanoplatelets with Enhanced Electrochemical Performance for Lithium Ion Batteries

Preparation and electrochemical profile of Li0.33MnO2 nanorods as cathode material for secondary lithium batteries

Facile Synthesis of Carbon-Limnpo4 Nanorods with Hierarchical Architecture As a Cathode for High-Performance Li-ion Batteries

Hydrothermal Synthesis of Monodispersed LiMnPO4 (010) Nanobelts and [001] Nanorods and Their Applications in Lithium-Ion Batteries

High-performance LiMnPO4 nanorods synthesized via a facile EG-assisted solvothermal approach

LiMn1-xFexPO4 Nanorods Grown on Graphene Sheets for Ultra-High Rate Performance Lithium Ion Batteries

Mn3O4 with different morphologies tuned through one-step electrochemical method for high-performance lithium-ion batteries anode

Superior Capacity, Rate, Long Cycle Life and High Temperature Performance of Multilayered Porous Ultralong LiMn2O4 Nanorods for Lithium Ion Batteries

A Facile Route to Synthesize Nano-Mno/c Composites and Their Application in Lithium Ion Batteries

Microemulsion‐Assisted Synthesis of Nanosized LiMnO Spinel Cathodes for High‐Rate Lithium‐Ion Batteries

Nano Limn2o4 As Cathode Material of High Rate Capability for Lithium Ion Batteries

In situ fabrication of porous-carbon-supported α-MnO2 nanorods at room temperature: application for rechargeable Li–O2 batteries

Facile fabrication of Fe0.8Mn1.2O3 with various nanostructures for high-performance lithium-ion batteries

Ultra-Long Nanorods Of Single-Crystalline Na0.44mno2 As Cathode Materials For Sodium-Ion Batteries

Synthesis of LiMn2O4 nano-wires via flux method and their usage as cathode material for lithium ion batteries

LiMn2O4 Nanorods, Nanothorn Microspheres, and Hollow Nanospheres as Enhanced Cathode Materials of Lithium Ion Battery

Controllable preparation of nanosized LiMnPO4/C with rod‐like morphology by hydrothermal method with excellent electrochemical performance

Nanoparticles-Assembly Of Limn2o4 Hollow Microspheres With Improved Rate Capability And Cycleability For Lithium Ion Batteries

Na‐Mn‐O Nanocrystals as a High Capacity and Long Life Anode Material for Li‐Ion Batteries

General Synthesis of Xli2mno3·(1 − X)limn1/3ni1/3co1/3o2 Nanomaterials by a Molten-Salt Method: Towards a High Capacity and High Power Cathode for Rechargeable Lithium Batteries