Abstract:The electric vehicle (EV) using a rechargeable lithium ion battery has become a type of idea to solve two great problems of industry: the shortage of oil energy sources and the pollution of the environment. However, the specific power density of this kind of battery, which means the capacities at high rate charge-discharge process, is still too low to support the industrial needs. How to improve the specific power density of the rechargeable lithium ion battery has recently become one of the most attractive topics of both scientific and industrial interests. Recently, nano-structured electrodes, including nanocrystal, nanoprous, and nanotube active materials, have been widely investigated to improve the performance of the rechargeable lithium ion battery at high rate charge-discharge process. Most of the nano-structured electrode materials are synthesized by a low-temperature treatment process such as soft chemical, sol-gel, and hydrothermal methods. However, the high-temperature sintering process, which is necessary for high performance cathode materials based on the high-quality crystallinity, leads the large-grain size and aggregation which gives poor performance of lithium ion battery resulted from increased lithium ion’s diffusion length and decreased effective surface area contacting with electrolyte. Among all of the nano-structures, single crystalline nanowire is the most attractive morphology because the nonwoven fabric morphology constructed by the single crystalline nanowire suppresses the aggregation and grain growth at high temperature, the potential barrier among the nanosize grains can be ignored to decrease the electronic resistance among the nanosize grains. However, the single crystalline nanowire of cubic crystal structure such as LiMn2O4 is extremely difficult because the cubic crystals can not growth to the 1-dimentional direction. Here we synthesized high quality single crystalline spinel LiMn2O4 nanowires based on a novel reaction method using Na0.44MnO2 nanowires as self-template. The spinel LiMn2O4 is the most promising candidate as a cathode material because of its low cost compared with commercial LiCoO2. These single crystalline LiMn2O4 nanowires have got not only excellent thermal stability for a high-temperature sintering process, but also a chargedischarge reversible stability even for high rate cycles. These single crystalline spinel LiMn2O4 nanowires show excellent performance at high rate charge-discharge process, which points that above 90%, 85% and 70% capacities at 1C (1C=100mA/g) can be retained even at remarkable high charge-discharge rates of 50C, 100C and 200C, respectively, with both a relative flat chargedischarge plateau and excellent cycle stability.

Nano Limn2o4 As Cathode Material of High Rate Capability for Lithium Ion Batteries

Ascorbic Acid-Assisted Solvothermal Synthesis of LiMn 0.9 Fe 0.1 PO 4 /C Nanoplatelets with Enhanced Electrochemical Performance for Lithium Ion Batteries

LiMn2O4 Nanorods As a Super-Fast Cathode Material for Aqueous Rechargeable Lithium Batteries

Nanoparticles-Assembly Of Limn2o4 Hollow Microspheres With Improved Rate Capability And Cycleability For Lithium Ion Batteries

Nanostructured Flexible Mg-Modified Limnpo4 Matrix As High-Rate Cathode Materials For Li-Ion Batteries

Nano Layered-Spinel 0.8li2mno3 · 0.2limn2o4 As High-Performance Cathode for Li-ion Batteries

Synthesis and Performance of Nano MnO As an Anode Material for Lithium-Ion Batteries

Graphene-encapsulated Li2MnTi3O8 Nanoparticles As a High Rate Anode Material for Lithium-Ion Batteries

Facile synthesis of nanostructured LiMnPO4 as a high-performance cathode material with long cycle life and superior rate capability

General synthesis of xLi2MnO3·(1 - X)LiMn 1/3Ni1/3Co1/3O2 nanomaterials by a molten-salt method: Towards a high capacity and high power cathode for rechargeable lithium batteries

Superior Capacity, Rate, Long Cycle Life and High Temperature Performance of Multilayered Porous Ultralong LiMn2O4 Nanorods for Lithium Ion Batteries

Lithium-Rich Li1.2ni0.13co0.13mn0.54o2 Oxide Coated By Li3po4 And Carbon Nanocomposite Layers As High Performance Cathode Materials For Lithium Ion Batteries

Unlocking The Potential of Li‐rich Mn‐based Oxides for High‐rate Rechargeable Lithium‐ion Batteries

LiMn2O4 nanotube as cathode material of second-level charge capability for aqueous rechargeable batteries.

High Rate Hybrid MnO2@CNT Fabric Anode for Li-Ion Batteries: Properties and Lithium Storage Mechanism by In-Situ Synchrotron X-Ray Scattering

Uniform Coaxial CNT@Li2MnSiO4@C As Advanced Cathode Material for Lithium-Ion Battery

Synthesis and Electrochemical Performance of High-Capacity 0.34li2mno3·0.66limn0.63ni0.24co0.13o2 Cathode Materials Using a Couette–Taylor Reactor

Synthesis of Single Crystalline LiMn2O4 Nanowires for the Fast Charge-discharge Li Ion Battery

Microemulsion‐Assisted Synthesis of Nanosized LiMnO Spinel Cathodes for High‐Rate Lithium‐Ion Batteries

A Simple, Low-Cost and Eco-Friendly Approach to Synthesize Single-Crystalline Limn2o4 Nanorods with High Electrochemical Performance for Lithium-Ion Batteries

Coaxial LiCoO2@Li2MnO3 Nanoribbon As a High Capacity Cathode for Lithium Ion Batteries