Abstract:LiMnPO4 as a positive electrode material for lithium ion batteries has been considered as a potential replacement material for LiFePO4 because of its 20% higher redox potential than that of LiFePO4. However, its low electron and lithium ion migration rate make this material an unsatisfactory rate performance and cycle stability. In this work, we report a simple solvothermal route to synthesize a novel "face-to-face" structure for LiMnPO4/expanded graphene composites, which compose of LiMnPO4 nanoplatelets with (010) preferential crystal plane in situ grown on expanded graphite. It can be found that the expanded graphite effects on the preferential orientation and morphology of the LiMnPO4 nanoparticles. In the composites, the "face-to-face" contact structure between the LiMnPO4 nanoplatelets and expanded graphite sheets provides pathways for rapid electron transfer, meanwhile, the LiMnPO4 nanoplatelets with (010) preferential crystal plane improve the active sites and shorten the Li ion diffusion distances, resulting in excellent electrochemical performance. It displays an initial discharge capacity of 130 mAhg−1, and capacity retention of 100% after 200 cycles at 1 C. Even at a high rate of 10 C, it still shows a high discharge capacity (102 mAhg−1) and long-life cycle stability (∼72% capacity retention over 1000 cycles).

LiMn1-xFexPO4 Nanorods Grown on Graphene Sheets for Ultra-High Rate Performance Lithium Ion Batteries

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Ascorbic Acid-Assisted Solvothermal Synthesis of LiMn 0.9 Fe 0.1 PO 4 /C Nanoplatelets with Enhanced Electrochemical Performance for Lithium Ion Batteries

Mono-dispersed LiFePO4@C Core-Shell [001] Nanorods for a High Power Li-ion Battery Cathode

Hydrothermal Synthesis of Monodispersed LiMnPO4 (010) Nanobelts and [001] Nanorods and Their Applications in Lithium-Ion Batteries

Facile Synthesis of Carbon-Limnpo4 Nanorods with Hierarchical Architecture As a Cathode for High-Performance Li-ion Batteries

Hierarchical porous onion-shaped LiMn2O4 as ultrahigh-rate cathode material for lithium ion batteries

High-performance LiMnPO4 nanorods synthesized via a facile EG-assisted solvothermal approach

Facile synthesis of 2D graphene oxide sheet enveloping ultrafine 1D LiMn2O4 as interconnected framework to enhance cathodic property for Li-ion battery

Superior Capacity, Rate, Long Cycle Life and High Temperature Performance of Multilayered Porous Ultralong LiMn2O4 Nanorods for Lithium Ion Batteries

LiMn1-xFexPO4 (x = 0, 0.1, 0.2) nanorods synthesized by a facile solvothermal approach as high performance cathode materials for lithium-ion batteries

Nanostructured Flexible Mg-Modified Limnpo4 Matrix As High-Rate Cathode Materials For Li-Ion Batteries

In-situ Synthesizing Superior High-Rate LiFePO4/C Nanorods Embedded in Graphene Matrix

Microsphere LiMn0.6Fe0.4PO4/C Cathode with Unique Rod-Like Secondary Architecture for High Energy Lithium Ion Batteries

Facile Preparation of Li0.44MnO2 Nanorods and Their Enhanced Electrochemical Lithium Storage Performance

LiNi0.5Mn1.5O4 Microrod with Ultrahigh Mn3+ Content: A High Performance Cathode Material for Lithium Ion Battery

LiMnPO4 nanoplates with optimal crystal orientation in situ anchored on the expanded graphite for high-rate and long-life lithium ion batteries

Porous Α-Fe 2 O 3 Nanorods Supported on Carbon Nanotubes-Graphene Foam As Superior Anode for Lithium Ion Batteries

Electrospun LiMn1.5Ni0.5O4 Hollow Nanofibers As Advanced Cathodes for High Rate and Long Cycle Life Li-ion Batteries

Nano Limn2o4 As Cathode Material of High Rate Capability for Lithium Ion Batteries

Rational Design of Graphene-Reinforced MnO Nanowires with Enhanced Electrochemical Performance for Li-Ion Batteries.