Abstract:Manganese carbonate (MnCO3) is an attractive anode material with high capacity based on conversion reaction for lithium-ion batteries (LIBs), but its application is mainly hindered by poor cycling performance. Building nanostructures/porous structures and nanocomposites has been demonstrated as an effective strategy to buffer the volume changes and maintain the electrode integrity for long-term cycling. It is widely believed that microsized MnCO3 is not suitable for use as anode material for LIBs because of its poor conductivity and the absence of nanostructure. Herein, different from previous reports, spherical MnCO3 with the mean diameters of 6.9 μm (MnCO3-B), 4.0 μm (MnCO3-M), and 2.6 μm (MnCO3-S) were prepared via controllable precipitation and utilized as anode materials for LIBs. It is interesting that the as-prepared MnCO3 microspheres demonstrate both high capacity and excellent cycling performance comparable to their reported nanosized counterparts. MnCO3-B, MnCO3-M, and MnCO3-S deliver reversible specific capacities of 487.3, 573.9, and 656.8 mA h g(-1) after 100 cycles, respectively. All the MnCO3 microspheres show capacity retention more than 90% after the initial stage. The advantages of MnCO3 microspheres were investigated via constant-current charge/discharge, cyclic voltammetry and electrochemical impedance spectroscopy. The results indicate that there should be substantial structure transformation from microsized particle to self-stabilized nanostructured matrix for MnCO3 at the initial charge/discharge stage. The evolution of EIS during charge/discharge clearly indicates the formation and stabilization of the nanostructured matrix. The self-stabilized porous matrix maintains the electrode structure to deliver excellent cycling performance, and contributes extra capacity beyond conversion reaction.

A Facile Route to Synthesize Nano-Mno/c Composites and Their Application in Lithium Ion Batteries

Mn0.5Co2.5O4 Nanofibers Intercalated into Graphene Frameworks with Mesoporous Structure for Batteries and Supercapacitors

Facile Synthesis of MnO/C Anode Materials for Lithium-Ion Batteries

Synthesis and Electrochemical Properties of Manganese Oxides/Carbon-Nitrogen Three-Dimensional Networks Composite as an Anode Material for Lithium Ion Batteries

MOF-derived ultrafine MnO nanocrystals embedded in a porous carbon matrix as high-performance anodes for lithium-ion batteries

A facile preparation route of MnO@C composite for high lithium storage anode

Facile Route to Biomass-Derived 1D Carbon Fiber Supported High-Performance MnO-based Nanocomposite Anode Material

One-pot synthesis of nanosized MnO incorporated into N-doped carbon nanosheets for high performance lithium storage

Nanoconfined Nitrogen-Doped Carbon-Coated MnO Nanoparticles in Graphene Enabling High Performance for Lithium-Ion Batteries and Oxygen Reduction Reaction

A simplified electrophoretic deposition route for sandwiched structure-based Mn3O4/G composite electrodes as high-capacity anodes for lithium-ion batteries

High Rate Hybrid MnO2@CNT Fabric Anode for Li-Ion Batteries: Properties and Lithium Storage Mechanism by In-Situ Synchrotron X-Ray Scattering

N-Containing Porous Carbon-Based MnO Composites as Anode with High Capacity and Stability for Lithium-Ion Batteries

Effects of Carbon Content and Current Density on the Li+ Storage Performance for MnO@C Nanocomposite Derived from Mn-Based Complexes

Synthesis of MnO/reduced Graphene Oxide Composites As High Performance Anode Materials for Li-ion Batteries

High-Capacity and Self-Stabilized Manganese Carbonate Microspheres As Anode Material for Lithium-Ion Batteries.

Tailoring carboxyl tubular carbon nanofibers/MnO 2 composites for high‐performance lithium‐ion battery anodes

Rational design of 3D net-like carbon-based Mn3O4 anode material with an enhanced lithium storage performance

Nitrogen-Enriched Porous Carbon Coating for Manganese Oxide Nanostructures Toward High-Performance Lithium-Ion Batteries.

Facile Synthesis of Hierarchical Micro/Nanostructured MnO Material and Its Excellent Lithium Storage Property and High Performance As Anode in a MnO/LiNi0.5Mn1.5O4-δ Lithium Ion Battery

Concisely Constructing S, F Co-Modified MnO Nanoparticles Attached to S, N Co-Doped Carbon Skeleton as a High-Rate Performance Anode Material

A Cellulose-Derived Nanofibrous MnO2-TiO2-Carbon Composite As Anodic Material for Lithium-Ion Batteries