Abstract:The ever-growing demands of Lithium-ion batteries (LIBs) for high-energy and long-life applications, such as smart grids and electrical vehicles, have drawn great research interest. Herein, 2D V6O13 nanosheets with good crystallinity and robust configuration are in situ synthesized by applying an interesting one-step uniform rotate hydrothermal method. X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy were carried out to characterize the crystal structure and micromorphology of the samples. In addition, the lithium storage performance of the sample was investigated through cyclic voltammetry, electrochemical impedance spectroscopy, and charge/discharge tests. Their capacity is up to 240 mAh g-1 at a current density of 100 mA g-1, corresponding to an initial Coulombic efficiency as high as 98.41%. Moreover, the capacity of 199 mAh g-1 can be delivered at a large current density of 500 mA g-1, and 87% of the capacity can be retained after 100 cycles. Even at a larger current density of 1000 mA g-1, they can still deliver a high capacity of 155.7 mAh g-1, and nearly 80% of the initial capacity can be kept after 300 cycles. This result is much higher than that of V6O13 prepared by traditional hydrothermal method under the same test conditions. These results demonstrate that the as-synthesized 2D V6O13 nanosheets by uniform rotate hydrothermal method have a promising future for high-rate and long-life cathode materials of next-generation LIBs.

Facile synthesis of NaV6O15 nanorods and its electrochemical behavior as cathode material in rechargeable lithium batteries

Electrochemical insertion/deinsertion of sodium on NaV6O 15 nanorods as cathode material of rechargeable sodium-based batteries

Synthesis and Electrochemical Properties of Single-Crystalline Liv3o8 Nanorods As Cathode Materials for Rechargeable Lithium Batteries

In situ soft-chemistry synthesis of beta-Na0.33V2O5 nanorods as high-performance cathode for lithium-ion batteries

NaV6O15 Nanoflakes with Good Cycling Stability as a Cathode for Sodium Ion Battery

Lithium-ion storage properties of a micro/nanosheet-like NaV6O15 anode in aqueous solution

Mo-doped V2O5 hierarchical nanorod/nanoparticle core/shell porous microspheres with improved performance for cathode of lithium-ion battery

Synthesis and Electrochemical Properties of Single-Crystalline Liv3o8 Nanobelts for Rechargeable Lithium Batteries

Low-cost Synthesis of Hierarchical V2O5 Microspheres As High-Performance Cathode for Lithium-Ion Batteries.

Mesoporous Single-Crystalline V2o5 Nanorods Assembled into Hollow Microspheres As Cathode Materials for High-Rate and Long-Life Lithium-Ion Batteries

Facile synthesis of tetragonal NaV2O5·H2O nanosheets co-intercalated by high content of Na+ and H2O for boosted lithium storage

Uniform rotate hydrothermal synthesis of V6O13 nanosheets as cathode material for lithium-ion battery

High Capacity and Enhanced Structural Reversibility of Β-Lixv2o5 Nanorods As the Lithium Battery Cathode

Synthesis and Electrochemical Properties of Nav3o8 Nanoflakes As High-Performance Cathode for Li-Ion Battery

Rechargeable aqueous zinc ion battery based on NaV6O15 nanorods by surfactant-assisted method

Aqueous rechargeable lithium batteries using NaV<sub>6</sub>O<sub>15</sub> nanoflakes as high performance anodes

Facile synthesis of Nb2O5 nanobelts assembled from nanorods and their applications in lithium ion batteries

Free-standing Vanadium Pentoxide Nanoribbon Film As a High-Performance Cathode for Rechargeable Sodium Batteries

In situ soft-chemistry synthesis of β-Na<sub>0.33</sub>V<sub>2</sub>O<sub>5</sub> nanorods as high-performance cathode for lithium-ion batteries

Hydrothermal synthesis and rate capacity studies of Li3V2(PO4)3 nanorods as cathode material for lithium-ion batteries

Electrochemical behavior and structural stability of LiV3O8 microrods as cathode for lithium-ion batteries