Abstract:Organic electroactive materials derived from biomasses are promising candidates for next generation rechargeable batteries due to low cost, sustainability and environmental benignity. However, the organic electrodes still suffer from low power density and poor cycling stability, caused by low electronic conductivity and high solubility in liquid organic electrolytes. Herein, we firstly reported a unique in situ organic electrode fabrication technology for Na-ion batteries. Using the 2,5-Dihydroxy-1,4-benzoquinone disodium salt (DHBQDS) as an organic anode, the DHBQDS nanorod electrode is in situ formed during electrode fabrication process by precipitating DHBQDS from DHBQDS-sodium alginate-carbon black aqueous slurry film on a Cu current collector during drying process. In the slurry film, the sodium alginate binder and carbon black play a critical role in the formation of DHBQDS nanorods. Integrating the synthesis of nano-electrode materials into electrode fabrication process greatly simplifies the electrode preparation process and will significantly reduce the battery cost. Due to the fast ionic and electronic conduction of DHBQDS-carbon nanocomposite, the DHBQDS nanorod electrodes deliver a reversible capacity of 167 mAh g-1 at a high current density of 200 mA g-1 after 300 cycles, which is 87% of its initial capacity (capacity decay rate of 0.051% per cycle). To reduce the dissolution of DHBQDS in the electrolyte upon cycling, a thin layer of Al2O3 with thickness of 1nm or 2 nm was coated on the DHBQDS nanorod electrodes using atomic layer deposition (ALD). The Al2O3 coating remarkably suppresses the dissolution of DHBQDS nanorods as evidenced by the increased Coulombic efficiency from 94% to ~100% at a low current density of 50 mA g-1 after initial few activation cycles. The reversible capacity of Al2O3 coated DHBQDS nanorod electrodes remains at 212 mAh g-1 after 300 cycles with a very low capacity decay rate of 0.049% per cycle. The ALD enhanced organic nanorods exhibit the best reversible capacity and cycle life among the organic electrodes reported for Na-ion batteries.

Electrochemical insertion/deinsertion of sodium on NaV6O 15 nanorods as cathode material of rechargeable sodium-based batteries

A robust, highly reversible, mixed conducting sodium metal anode

Facile synthesis of NaV6O15 nanorods and its electrochemical behavior as cathode material in rechargeable lithium batteries

Ultra-Long Nanorods Of Single-Crystalline Na0.44mno2 As Cathode Materials For Sodium-Ion Batteries

NaV6O15 Nanoflakes with Good Cycling Stability as a Cathode for Sodium Ion Battery

Free-standing Vanadium Pentoxide Nanoribbon Film As a High-Performance Cathode for Rechargeable Sodium Batteries

Rechargeable aqueous zinc ion battery based on NaV6O15 nanorods by surfactant-assisted method

VOC Bonding of Heterointerface Boosting Kinetics of Free‐Standing Na5V12O32 Cathode for Ultralong Lifespan Sodium‐Ion Batteries

Synthesis and Electrochemical Properties of Single-Crystalline Liv3o8 Nanorods As Cathode Materials for Rechargeable Lithium Batteries

Electrochemical properties of Na$_{0.66}$V$_4$O$_{10}$ nanostructures as cathode material in rechargeable batteries for energy storage applications

A Simple Method for the Synthesis of KV3O8·0.42H2O Nanorod and Its Lithium Insertion/Deinsertion Properties

Submicrometer Rod-Structured Na7V4 (P2O7)4(PO4)/C As a Cathode Material for Sodium-Ion Batteries

In Situ Precipitated Organic Nanorod Electrodes for Sodium Ion Batteries

A Fully Sodiated NaVOPO4 with Layered Structure for High-Voltage and Long-Lifespan Sodium-Ion Batteries

A high-entropy-designed cathode with V 5+ -V 2+ multi-redox for high energy density sodium-ion batteries

Aqueous rechargeable lithium batteries using NaV<sub>6</sub>O<sub>15</sub> nanoflakes as high performance anodes

“Electron/Ion Sponge”-Like V-Based Polyoxometalate: Toward High-Performance Cathode for Rechargeable Sodium Ion Batteries

Annealed Nav3o8 Nanowires with Good Cycling Stability As A Novel Cathode for Na-Ion Batteries

Hydrogen Sodium Vanadium Oxide Hydrate with Oxygen Vacancy: A New Layered Cathode Material for Sodium-Ion Battery

VOPO4⋅2H2O Nanosheet Cathode for Enhanced Sodium Storage

Facile synthesis of tetragonal NaV2O5·H2O nanosheets co-intercalated by high content of Na+ and H2O for boosted lithium storage