Abstract:Ni-rich Li[NixCoyMn1-x-y]O-2 (x >= 0.8) layered oxides are the most promising cathode materials for lithium-ion batteries due to their high reversible capacity of over 200 mAh g(-1). Unfortunately, the anisotropic properties associated with the alpha-NaFeO2 structured crystal grains result in poor rate capability and insufficient cycle life. To address these issues, a micrometer-sized Ni-rich LiNi0.8Co0.1Mn0.1O2 secondary cathode material consisting of radially aligned single-crystal primary particles is proposed and synthesized. Concomitant with this unique crystallographic texture, all the exposed surfaces are active {010} facets, and 3D Li+ ion diffusion channels penetrate straightforwardly from surface to center, remarkably improving the Li+ diffusion coefficient. Moreover, coordinated charge-discharge volume change upon cycling is achieved by the consistent crystal orientation, significantly alleviating the volume-change-induced intergrain stress. Accordingly, this material delivers superior reversible capacity (203.4 mAh g(-1) at 3.0-4.3 V) and rate capability (152.7 mAh g(-1) at a current density of 1000 mA g(-1)). Further, this structure demonstrates excellent cycling stability without any degradation after 300 cycles. The anisotropic morphology modulation provides a simple, efficient, and scalable way to boost the performance and applicability of Ni-rich layered oxide cathode materials.

Facile synthesis of orthorhombic LiMnO2 nanorods by in-situ carbothermal reduction: Promising cathode material for Li ion batteries

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Orthorhombic Limno2 Nanorods As Cathode Materials for Lithium-Ion Batteries: Synthesis and Electrochemical Properties

A Simple, Low-Cost and Eco-Friendly Approach to Synthesize Single-Crystalline Limn2o4 Nanorods with High Electrochemical Performance for Lithium-Ion Batteries

Synthesis of Li1.2Mn0.54Ni0.13Co0.13O2 Nanorods by a Facile Self-Template Method and Their Electrochemical Performances

Preparation and electrochemical profile of Li0.33MnO2 nanorods as cathode material for secondary lithium batteries

Low temperature hydrothermally synthesized nanocrystalline orthorhombic LiMnO2 cathode material for lithium-ion cells

Facile Preparation of Li0.44MnO2 Nanorods and Their Enhanced Electrochemical Lithium Storage Performance

A simple and facile one-step strategy to synthesize orthorhombic LiMnO 2 nano-particles with excellent electrochemical performance

Superior Stability and Dynamic Performance of Single Crystal LiNi1/3Co1/3Mn1/3O2 Nanorods from Β-Mno2 Template for Lithium-Ion Batteries

Low-cost and eco-friendly synthesis of octahedral LiMn2O4 cathode material with excellent electrochemical performance

Facile Synthesis of Carbon-Limnpo4 Nanorods with Hierarchical Architecture As a Cathode for High-Performance Li-ion Batteries

Hydrothermal synthesis of orthorhombic LiMnO 2 nano-particles and LiMnO 2 nanorods and comparison of their electrochemical performances

Low temperature hydrothermally synthesized nanocrystalline orthorhombic LiMnO

Hydrothermal synthesis of orthorhombic LiMnO<sub>2</sub> nano-particles and LiMnO<sub>2</sub> nanorods and comparison of their electrochemical performances

LiMn2O4 Nanorods As a Super-Fast Cathode Material for Aqueous Rechargeable Lithium Batteries

Facile synthesis of mesoporous Mn3O4 nanotubes and their excellent performance for lithium-ion batteries

MnO2 Nanowires As Precursor Synthesis of Lithium-Rich Cathode Material with Enhanced Electrochemical Performances

Facile synthesis of loaf-like ZnMn₂O₄ nanorods and their excellent performance in Li-ion batteries.

Spinel Limn2o4 Nanorods As Lithium Ion Battery Cathodes

Mechanism and properties of rod-like Li1.2Mn0.54Ni0.13Co0.13O2 cathode material synthesized by β-MnO2 template for advanced Li-ion batteries