Abstract:The single-crystalline LiMn2O4 nanorods were successfully synthesized by a simple, low-cost and eco-friendly approach in which the γ-MnOOH nanorods were prepared through a facile hydrothermal process, in which KMnO4 was reduced by anhydrous alcohol (CH3CH2OH) without adding any template reagent or additional surfactant. The crystal structures and morphologies of synthesized materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), respectively. The results showed that the γ-MnOOH nanorods had high crystallinity and well-shaped morphology with an average diameter of 200nm and an average length of 12μm. For the resulting LiMn2O4 nanorods, the electrochemical properties were investigated by galvanostatic charge-discharge test, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). For the optimal LiMn2O4 nanorods, the initial discharge capacity was 123.5mAhg−1 and remained 110.2mAhg−1 after 100 cycles at 1.0C in the voltage range of 3.20∼4.35V. Moreover, the optimal LiMn2O4 nanorods can present superior rate performance, especially the capacity recovery performance as the charge-discharge rate restores to 0.1C from 5.0C. Such excellent electrochemical performance could make them to be the promising cathode material for high performance lithium-ion batteries.

Spinel Limn2o4 Nanorods As Lithium Ion Battery Cathodes

A Simple, Low-Cost and Eco-Friendly Approach to Synthesize Single-Crystalline Limn2o4 Nanorods with High Electrochemical Performance for Lithium-Ion Batteries

Limn2o4 Nanorods Synthesized by Mnooh Template for Lithium-Ion Batteries with Good Performance

Orthorhombic Limno2 Nanorods As Cathode Materials for Lithium-Ion Batteries: Synthesis and Electrochemical Properties

Hydrothermal Synthesis of Monodispersed LiMnPO4 (010) Nanobelts and [001] Nanorods and Their Applications in Lithium-Ion Batteries

Microemulsion‐Assisted Synthesis of Nanosized LiMnO Spinel Cathodes for High‐Rate Lithium‐Ion Batteries

Superior Stability and Dynamic Performance of Single Crystal LiNi1/3Co1/3Mn1/3O2 Nanorods from Β-Mno2 Template for Lithium-Ion Batteries

Single-Crystalline Limn2o4 Nanotubes Synthesized Via Template-Engaged Reaction As Cathodes for High-Power Lithium Ion Batteries

Hydrothermal Synthesis of Monodispersed LiMnPO4 (010) Nanobelts and [001] Nanorods and Their Applications in Lithium-Ion Batteries: Hydrothermal Synthesis of Monodispersed LiMnPO4 (010) Nanobelts and [001] Nanorods and Their Applications in Lithium-Ion Batteries

LiMn2O4 Nanorods, Nanothorn Microspheres, and Hollow Nanospheres as Enhanced Cathode Materials of Lithium Ion Battery

Lithium Manganese Spinel Cathodes for Lithium‐Ion Batteries

Facile synthesis of orthorhombic LiMnO2 nanorods by in-situ carbothermal reduction: Promising cathode material for Li ion batteries

Nano Layered-Spinel 0.8li2mno3 · 0.2limn2o4 As High-Performance Cathode for Li-ion Batteries

Nanoparticles-Assembly Of Limn2o4 Hollow Microspheres With Improved Rate Capability And Cycleability For Lithium Ion Batteries

Facile Synthesis of Carbon-Limnpo4 Nanorods with Hierarchical Architecture As a Cathode for High-Performance Li-ion Batteries

Chelate-induced Formation of Li2MnSiO4 Nanorods As a High Capacity Cathode Material for Li-ion Batteries

Synthesis of Mn<sub>3</sub>O<sub>4</sub>nanowires and their transformation to LiMn<sub>2</sub>O<sub>4</sub>polyhedrons, application of LiMn<sub>2</sub>O<sub>4</sub>as a cathode in a lithium-ion battery

LiMn2O4 Microspheres Secondary Structure of Nanoparticles/plates As Cathodes for Li-ion Batteries

Preparation and electrochemical profile of Li0.33MnO2 nanorods as cathode material for secondary lithium batteries

LiMn2O4 Nanorods As a Super-Fast Cathode Material for Aqueous Rechargeable Lithium Batteries

LiNi0.5Mn1.5O4 Microrod with Ultrahigh Mn3+ Content: A High Performance Cathode Material for Lithium Ion Battery