Abstract:The single-crystalline LiMn2O4 nanorods were successfully synthesized by a simple, low-cost and eco-friendly approach in which the γ-MnOOH nanorods were prepared through a facile hydrothermal process, in which KMnO4 was reduced by anhydrous alcohol (CH3CH2OH) without adding any template reagent or additional surfactant. The crystal structures and morphologies of synthesized materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), respectively. The results showed that the γ-MnOOH nanorods had high crystallinity and well-shaped morphology with an average diameter of 200nm and an average length of 12μm. For the resulting LiMn2O4 nanorods, the electrochemical properties were investigated by galvanostatic charge-discharge test, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). For the optimal LiMn2O4 nanorods, the initial discharge capacity was 123.5mAhg−1 and remained 110.2mAhg−1 after 100 cycles at 1.0C in the voltage range of 3.20∼4.35V. Moreover, the optimal LiMn2O4 nanorods can present superior rate performance, especially the capacity recovery performance as the charge-discharge rate restores to 0.1C from 5.0C. Such excellent electrochemical performance could make them to be the promising cathode material for high performance lithium-ion batteries.

Orthorhombic Limno2 Nanorods As Cathode Materials for Lithium-Ion Batteries: Synthesis and Electrochemical Properties

Facile synthesis of orthorhombic LiMnO2 nanorods by in-situ carbothermal reduction: Promising cathode material for Li ion batteries

A Simple, Low-Cost and Eco-Friendly Approach to Synthesize Single-Crystalline Limn2o4 Nanorods with High Electrochemical Performance for Lithium-Ion Batteries

Superior Stability and Dynamic Performance of Single Crystal LiNi1/3Co1/3Mn1/3O2 Nanorods from Β-Mno2 Template for Lithium-Ion Batteries

Synthesis of Li1.2Mn0.54Ni0.13Co0.13O2 Nanorods by a Facile Self-Template Method and Their Electrochemical Performances

Limn2o4 Nanorods Synthesized by Mnooh Template for Lithium-Ion Batteries with Good Performance

Hydrothermal Synthesis of Monodispersed LiMnPO4 (010) Nanobelts and [001] Nanorods and Their Applications in Lithium-Ion Batteries

Spinel Limn2o4 Nanorods As Lithium Ion Battery Cathodes

Preparation and electrochemical profile of Li0.33MnO2 nanorods as cathode material for secondary lithium batteries

Hydrothermal synthesis of orthorhombic LiMnO 2 nano-particles and LiMnO 2 nanorods and comparison of their electrochemical performances

Facile Synthesis of Carbon-Limnpo4 Nanorods with Hierarchical Architecture As a Cathode for High-Performance Li-ion Batteries

Facile Preparation of Li0.44MnO2 Nanorods and Their Enhanced Electrochemical Lithium Storage Performance

Electrochemical properties of MnO 2 nanorods as anode materials for lithium ion batteries

Hydrothermal synthesis of orthorhombic LiMnO<sub>2</sub> nano-particles and LiMnO<sub>2</sub> nanorods and comparison of their electrochemical performances

Facile synthesis of loaf-like ZnMn₂O₄ nanorods and their excellent performance in Li-ion batteries.

Mechanism and properties of rod-like Li1.2Mn0.54Ni0.13Co0.13O2 cathode material synthesized by β-MnO2 template for advanced Li-ion batteries

LiMn2O4 Nanorods As a Super-Fast Cathode Material for Aqueous Rechargeable Lithium Batteries

MnO2 Nanowires As Precursor Synthesis of Lithium-Rich Cathode Material with Enhanced Electrochemical Performances

LiMn1-xFexPO4 Nanorods Grown on Graphene Sheets for Ultra-High Rate Performance Lithium Ion Batteries

MnO Nanorods Coated by Co-decorated N-doped Carbon As Anodes for High Performance Lithium Ion Batteries

Low temperature hydrothermally synthesized nanocrystalline orthorhombic LiMnO2 cathode material for lithium-ion cells