Abstract:High-performance p-type oxide thin film transistors (TFTs) have great potential for many semiconductor applications. However, these devices typically suffer from low hole mobility and high off-state currents. We fabricated p-type TFTs with a phase-pure polycrystalline Cu2O semiconductor channel grown by atomic layer deposition (ALD). The TFT switching characteristics were improved by applying a thin ALD Al2O3 passivation layer on the Cu2O channel, followed by vacuum annealing at 300 °C. Detailed characterization by transmission electron microscopy–energy dispersive X-ray analysis and X-ray photoelectron spectroscopy shows that the surface of Cu2O is reduced following Al2O3 deposition and indicates the formation of a 1–2 nm thick CuAlO2 interfacial layer. This, together with field-effect passivation caused by the high negative fixed charge of the ALD Al2O3, leads to an improvement in the TFT performance by reducing the density of deep trap states as well as by reducing the accumulation of electrons in the semiconducting layer in the device off-state.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c18915?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c18915</a>.More detailed information and experimental data on Hall mobility; TFT characteristics; high-temperature GIXRD; XPS; and Cu and Cu2O oxidation (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c18915/suppl_file/am0c18915_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High-mobility p-type NiO<sub>x</sub> thin-film transistors processed at low temperatures with Al<sub>2</sub>O<sub>3</sub> high-k dielectric

Tunable Electrical Properties of NiO Thin Films and P-Type Thin-Film Transistors

High mobility transparent flexible nickel-doped zinc oxide thin-film transistors with small subthreshold swing

P‐1.11: High‐mobility ZnO thin‐film transistors with HfO<sub>2</sub>/Al<sub>2</sub>O<sub>3</sub> bilayer dielectric

Amorphous P-Type CuNiSnO Thin-Film Transistors Processed at Low Temperatures

Low-voltage Zinc Oxide Thin-Film Transistors with Solution-Processed Channel and Dielectric Layers below 150 °C

High Performance Aluminum-Doped Zno Thin Film Transistors with High-K Gate Dielectrics Fabricated at Low Temperature

High Quality Ultrathin Gate Dielectrics Prepared by In-Situ RTP

P‐1.8: High Performance ZnO Thin Film Transistors on Flexible Substrate with Process Temperature No More Than 100 °C

1‐1: Oxide Semiconductor Thin‐Film Transistors with High Mobility and Stability

High–performance Fully–transparent Ni–doped ZnO Thin–film Transistors Fabricated on Flexible Plastic Substrate at Low Temperature

Enabling high performance n-type metal oxide semiconductors at low temperatures for thin film transistors

Flexible Nickel-Doped Zinc Oxide Thin-Film Transistors Fabricated On Plastic Substrates At Low Temperature

Fabrication of highly resistive NiO thin films for nanoelectronic applications

Low Contact Resistivity of Ti/TiN/Al for NiSi2 on Epitaxial Si:P Structure at Full Low-Temperature Process below 450 °C

Role of ALD Al2O3 surface passivation on the performance of p-type Cu2O thin film transistors

High-Performance Transistors Based on Zinc Tin Oxides by Single Spin-Coating Process

Nanocluster-Based Ultralow-Temperature Driven Oxide Gate Dielectrics for High-Performance Organic Electronic Devices

Role of ALD Al 2 O 3 Surface Passivation on the Performance of p-Type Cu 2 O Thin Film Transistors

High-Performance ZnO Thin-Film Transistors Prepared by Atomic Layer Deposition

Nanogranular Al2O3 Proton Conducting Films for Low-Voltage Oxide-Based Homojunction Thin-Film Transistors