Abstract:An effective electrolyte additive, 3-( tert -Butyldimethylsilyoxy) phenylboronic acid (TBPB), is proposed to significantly improve the cycle stability of high voltage LiCoO 2 (LCO) cathode. Experimental and computational results show that TBPB has a relatively higher oxidation activity than base electrolyte, and preferentially constructs a stable cathode electrolyte interphase (CEI) containing B-/Si- components on LCO surface. Theoretical calculation, XPS and NMR data show that TBPB-derived CEI layer contains B-F species and has the function of eliminating HF. The as-formed CEI effectively inhibits the detrimental side reactions from electrolyte decomposition and LCO surface structure reconstruction. The capacity retention of LCO/Li half-cell increases from 38.92% (base electrolyte) to 83.70% after 150 cycles at 1 C between 3.0 V and 4.5 V by adding 1% TBPB. Moreover, TBPB is also reduced prior to base electrolyte, forming an ionic conducting solid electrolyte interphase (SEI) on graphite surface. Benefiting from the synergistic effect between CEI layer on LCO cathode and SEI layer on graphite anode to effectively decrease the electrolyte decomposition, the capacity retention of commercial LCO/graphite pouch cell with 1% TBPB increases from 10.44% to 76.13% after 400 cycles at 1 C between 3.0 V and 4.5 V. This work demonstrates that TBPB can act as an effective film-forming additive for high energy density LCO cathode at high voltage, and provides novel insights for its commercial application from the aspect of synergistically interfacial stability.

Enhancing the Electrochemical Performance of a High-Voltage LiCoO2 Cathode with a Bifunctional Electrolyte Additive

Boosting High Voltage Cycling of LiCoO2 Cathode Via Triisopropanolamine Cyclic Borate Electrolyte Additive

Synergistic Effects of Co-Additives in Constructing a Robust and Li+-conductive Interphase for High-Voltage LiCoO2

Stabilizing the LiCoO2 Interface at High Voltage with an Electrolyte Additive 2,4,6-Tris(4-fluorophenyl)boroxin

Constructing Solid Electrode-Electrolyte Interfaces in High-Voltage Li| LiCoO2 Batteries under Dual-Additive Electrolyte Synergistic Effect

Glycerol Tris(2‐cyanoethyl) Ether As an Electrolyte Additive to Enhance the Cycling Stability of Lithium Cobalt Oxide Cathode at 4.5 V

Tailoring Electrolyte Dehydrogenation with Trace Additives: Stabilizing the LiCoO2 Cathode Beyond 4.6 V

Constructing a Stabilized Cathode Electrolyte Interphase for High-Voltage LiCoO2 Batteries Via the Phenylmaleic Anhydride Additive

Organic Cathode Electrolyte Interphase Achieving 4.8 V LiCoO2

Conductive Li+ Moieties‐Rich Cathode Electrolyte Interphase with Electrolyte Additive for 4.6 V Well‐Cycled Li||LiCoO2 Batteries

Enabling Stable High‐Voltage LiCoO2 Operation by Using Synergetic Interfacial Modification Strategy

B-/Si-containing electrolyte additive efficiently establish a stable interface for high-voltage LiCoO 2 cathode and its synergistic effect on LiCoO 2 /graphite pouch cells

Improved Cyclic Stability of LiNi0.8Mn0.1Co0.1O2 Cathode Enabled by a Novel CEI Forming Additive

Non‐Sacrificial Additive Enables a Non‐Passivating Cathode Interface for 4.6 V Li||LiCoO2 Batteries

An Effective Electrolyte Strategy to Improve the High-Voltage Performance of LiCoO2 Cathode Materials

Tributyl Borate As a Novel Electrolyte Additive to Improve High Voltage Stability of Lithium Cobalt Oxide in Carbonate-Based Electrolyte

A compact interphase involving reversible redox couple stabilizes 4.6 V LiCoO2 cathode

A Multifunctional Thiophene-Based Electrolyte Additive for Lithium Metal Batteries Using High-Voltage LiCoO2 Cathode

Synergistic effect of fluorinated solvent and Mg2+ enabling 4.6 V LiCoO2 performances

High-Entropy Surface Complex Stabilized LiCoO<sub>2</sub> Cathode

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes