Abstract:A surface‐to‐bulk modification with Li2TiO3 coating and gradient Ti doping is demonstrated to solve the deterioration of LiCoO2 at high voltage. The synergetic modification enhances Li+ diffusion, facilitates the construction of high‐quality cathode/electrolyte interphase, reduces the phase transition from O3 to H1‐3 and Co3d/O2p band overlap, and restrains layer‐to‐spinel phase distortion, thus improving structural stability at 4.6 V. Elevating the charging cut‐off voltage is an effective strategy to increase the energy density of LiCoO2. However, unstable interfacial structures and unfavorable phase transitions in bulk are inevitably triggered during deep de‐lithiation at high voltage. Herein, an integrated surface‐to‐bulk Ti‐modification strategy is applied to LiCoO2, enabling uniform Li2TiO3 coating on the surface and gradient Ti‐doping toward the structural bulk. The resultant Ti‐modified LiCoO2 (T‐LCO) electrode can be stably cycled up to 4.6 V, providing a high‐rate capability of 137 mAh g−1 at 5C and a long‐life stability with 80.5% capacity retention after 400 cycles at 1C, far outperforming the unmodified LiCoO2 electrode with only 50.7% capacity retention. In situ X‐ray diffraction characterization and density functional theory calculation reveal that the synergistic modification of T‐LCO enhances Li+ diffusion, facilitates the construction of high‐quality cathode/electrolyte interphase, reduces the phase transition from O3 to H1‐3 and Co3d/O2p band overlap, and restrains layer‐to‐spinel phase distortion, thus improving structural stability at 4.6 V. This work presents a "two birds one step" strategy to enhance the cycling stability and achievable capacity of high‐voltage LiCoO2 for developing high energy density lithium‐ion batteries.

Stabilizing the LiCoO2 Interface at High Voltage with an Electrolyte Additive 2,4,6-Tris(4-fluorophenyl)boroxin

Boosting High Voltage Cycling of LiCoO2 Cathode Via Triisopropanolamine Cyclic Borate Electrolyte Additive

Enhancing the Electrochemical Performance of a High-Voltage LiCoO2 Cathode with a Bifunctional Electrolyte Additive

Synergistic Effects of Co-Additives in Constructing a Robust and Li+-conductive Interphase for High-Voltage LiCoO2

B-/Si-containing electrolyte additive efficiently establish a stable interface for high-voltage LiCoO 2 cathode and its synergistic effect on LiCoO 2 /graphite pouch cells

Synergistic effect of fluorinated solvent and Mg2+ enabling 4.6 V LiCoO2 performances

Tailoring Electrolyte Dehydrogenation with Trace Additives: Stabilizing the LiCoO2 Cathode Beyond 4.6 V

Stabilizing 4.6 V LiCoO2 via Surface‐to‐Bulk Titanium Modification

Enabling Stable High‐Voltage LiCoO2 Operation by Using Synergetic Interfacial Modification Strategy

High-Voltage and High-Temperature LiCoO2 Operation via the Electrolyte Additive of Electron-Defect Boron Compounds

Stabilizing LiCoO<sub>2</sub> at 4.6 V by regulating anti-oxidative solvents

High-Voltage and High-Temperature LiCoO 2 Operation via the Electrolyte Additive of Electron-Defect Boron Compounds

Constructing a Stable Interface by 2,4,6-Trimethoxyboroxine As an Electrolyte Additive for Li-rich Layered Oxide Cathode under High Voltage

Tributyl Borate As a Novel Electrolyte Additive to Improve High Voltage Stability of Lithium Cobalt Oxide in Carbonate-Based Electrolyte

Toward a Stable Electrochemical Interphase with Enhanced Safety on High-Voltage LiCoO2 Cathode: A Case of Phosphazene Additives

Constructing Solid Electrode-Electrolyte Interfaces in High-Voltage Li| LiCoO2 Batteries under Dual-Additive Electrolyte Synergistic Effect

Stabilizing High-Voltage LiCoO2 Cathode in Aqueous Electrolyte with Interphase-forming Additive

Stabilizing LiCoO2 at 4.6 V by regulating anti-oxidative solvents

Regulating solvated sheath with anion chelant enables 4.6 V ultra‐stable commercial LiCoO2

Conductive Robust Interfaces with Fluoro-Borate Based Electrolyte Additive for 4.6 V Well-Cycled LiNi0.90Co0.06Mn0.04O2||Li Batteries

A compact interphase involving reversible redox couple stabilizes 4.6 V LiCoO2 cathode