Abstract:High-voltage LiCoO2 (LCO) offers a prelude to breaking the bottleneck of the energy density of lithium-ion batteries, however, LiCoO2 is subject to serious structural and interfacial degradation above voltages >4.55 V (vs. Li/Li+). Herein, an in-situ Li6.25La3Zr2Al0.25O12 (LLZAO) layer is constructed on the LCO surface to achieve operating voltage at 4.6 V. The detailed characterizations (ex-situ XRD, ex-situ Raman, DFT, etc.) reveal that the LLZAO layer greatly enhances Li+ conductivity attributed to the ion -conducting layer on the surface/interface, and closely combines with LiCoO2 particle to ensure stable cathode/electrolyte interface, thus suppressing the highly reactive Co4+ and O- triggered surface side reac-tions at high-voltage. Moreover, the introduction of La3+/Zr4+/Al3+ with a larger ionic radius (La3+/Zr4+ are larger than Co3+) and weaker electronegativity (La/Zr/Al are weaker than Co) into Co3+ sites readjusts the electron cloud density between Co-O-Li, which reinforces the Co-O bond and widens the band-center gap of Co 3d and O 2p, thus restraining the detrimental phase transition (from H3 to H1-3 phase) and the formation of Co3O4 spinel phase (attributed to lattice oxygen release), subsequently alleviating the particle cracking and structural collapse during repeated Li+ de/intercalation. Therefore, after 100 cycles at 3.0-4.6 V, LCO@1.0LLZAO exhibits a superior discharge capacity of 188.5 mA h g-1, with a capacity retention of 85.1%. The above research has brought about meaningful guidance for the evolution of cath-ode materials with high voltage. (c) 2022 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by ELSEVIER B.V. and Science Press. All rights reserved.

Enabling Stable High‐Voltage LiCoO2 Operation by Using Synergetic Interfacial Modification Strategy

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Improving Stability of High Voltage LiCoO2 by Synergetic Surface Modification Via in Situ Surface Conversion

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

Surface-interspersed Nanoparticles Induced Cathode-Electrolyte Interphase Enabling Stable Cycling of High-Voltage LiCoO2

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathode

Surface-interspersed nanoparticles induced cathode-electrolyte interphase enabling stable cycling of high-voltage LiCoO 2

Channelization of cathode/electrolyte interphase to enhance the rate-capability of LiCoO2

Highly stable operation of LiCoO2 at cut-off ≥ 4.6 V enabled by synergistic structural and interfacial manipulation

Synergistic Effects of Co-Additives in Constructing a Robust and Li+-conductive Interphase for High-Voltage LiCoO2

Superior stable high‐voltage LiCoO2 enabled by modification with a layer of lithiated polyvinylidene fluoride‐derived LiF

A compact interphase involving reversible redox couple stabilizes 4.6 V LiCoO2 cathode

External-to-internal Synergistic Strategy to Enable Multi-Scale Stabilization of LiCoO2 at High-Voltage

Enhancing the Electrochemical Performance of a High-Voltage LiCoO2 Cathode with a Bifunctional Electrolyte Additive

Stabilizing LiCoO<sub>2</sub> at 4.6 V by regulating anti-oxidative solvents

Synergistic effect of fluorinated solvent and Mg2+ enabling 4.6 V LiCoO2 performances

Stabilizing the LiCoO2 Interface at High Voltage with an Electrolyte Additive 2,4,6-Tris(4-fluorophenyl)boroxin

Stabilizing LiCoO2 at 4.6 V by regulating anti-oxidative solvents

Ultrathin Dense LiF Coverage Coupled with a Near-Surface Gradient Fluorination Lattice Enables Fast-Charging Long-Life 4.6 V LiCoO2

Tailoring Electrolyte Dehydrogenation with Trace Additives: Stabilizing the LiCoO2 Cathode Beyond 4.6 V

In situ constructing a stable interface film on high-voltage LiCoO2 cathode via a novel electrolyte additive